Introduction
The Satechi Dual Vertical Aluminum Stand is designed to optimize your workspace by securely holding your laptop, tablet, and smartphone in an upright position. This stand helps to free up valuable desk space while providing a sleek and modern aesthetic. Its robust aluminum construction and protective rubberized grip pads ensure your devices are held safely and without scratches.
What's Included
- Satechi Dual Vertical Aluminum Stand
- User Manual (this document)
- Customer Support Information
Setup
The Satechi Dual Vertical Aluminum Stand requires minimal setup. It is designed for immediate use out of the box.
- Unpack the Stand: Carefully remove the stand from its packaging.
- Choose a Stable Surface: Place the stand on a flat, stable, and level surface on your desk or workstation.
- Identify Slots: The stand features two distinct slots:
- One wider slot (up to 0.6 inches) for laptops.
- One narrower slot (up to 0.4 inches) for tablets and smartphones.

Image: Side view of the Satechi Dual Vertical Aluminum Stand, highlighting the two slot widths: 0.6 inches for laptops and 0.4 inches for tablets/smartphones.
Operating Instructions
Using the Satechi Dual Vertical Aluminum Stand is straightforward. Ensure your device fits within the specified slot widths to prevent damage or instability.
- Insert Device: Gently slide your laptop, tablet, or smartphone into the appropriate vertical slot. The rubberized grip pads inside the slots will securely hold your device and protect it from scratches.
- Cable Management: If using your laptop in clamshell mode or charging devices, route necessary cables (e.g., USB-C, power) through the open space at the bottom of the stand for a tidy setup.
- Optimal Placement: Position the stand on your desk to maximize space and maintain an organized workstation.

Image: The Satechi Dual Vertical Aluminum Stand in use on a desk, holding a MacBook in the wider slot and an iPhone in the narrower slot, demonstrating space-saving and organization.

Image: The Satechi Dual Vertical Aluminum Stand holding an iPad in the wider slot and an iPhone in the narrower slot, showcasing its versatility for different device combinations.
Maintenance
To ensure the longevity and appearance of your Satechi Dual Vertical Aluminum Stand, follow these simple maintenance guidelines:
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
- Dust Removal: Regularly dust the stand to prevent accumulation, especially in the slots.
- Inspect Pads: Periodically check the rubberized grip pads for wear and tear. While durable, excessive friction or sharp objects can damage them.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Device does not fit in slot. | Device is too thick for the slot, or a protective case is adding too much bulk. | Ensure your device's thickness (including any case) is within the specified limits (0.6 inches for the wider slot, 0.4 inches for the narrower slot). Remove bulky cases if necessary. |
| Stand feels unstable. | Stand is on an uneven surface, or device is not properly seated. | Place the stand on a flat, stable surface. Ensure the device is fully inserted into the slot and resting against the rubberized pads. Avoid placing excessively heavy or unbalanced items in the stand. |
| Scratches on device after use. | Foreign particles in the slot, or damaged rubberized pads. | Clean the slots regularly to remove dust or debris. Inspect the rubberized pads for any damage; if severely worn, contact Satechi customer support. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5 x 3.43 x 2.28 inches |
| Item Weight | 10.8 ounces |
| Model Number | ST-ADVSM |
| Material | Aluminum with Rubberized Grip Pads |
| Color | Space Gray |
| Laptop Slot Width | Up to 0.6 inches |
| Tablet/Smartphone Slot Width | Up to 0.4 inches |
Compatibility
The Satechi Dual Vertical Aluminum Stand offers universal compatibility for a wide range of devices, provided their thickness fits within the specified slot dimensions.
Compatible Devices Include:
- MacBook Models: M2/M1 MacBook Pro (Pro & Max) 14-inch, 16-inch, M2/M1 MacBook Air, 2016-2019 MacBook Pro, 2018 MacBook Air.
- iPad Models: M2/M1 iPad Pro, M1 iPad Air, 2022 10th-Gen iPad, iPad Pro, iPad Mini.
- iPhone Models: iPhone 16 Pro Max/16 Pro/16/16 Plus, iPhone 15 Pro Max/15 Pro/15/15 Plus, iPhone 14 Pro Max/14 Pro/14/14 Plus, iPhone 13 Pro Max/13 Pro/13/13 Mini, iPhone 12 Pro Max/12 Pro/12/12 Mini, iPhone 11 Pro Max/Pro/11, XS Max/XS/XR/X.
- And other laptops, tablets, and smartphones with a thickness up to 0.6 inches (for the wider slot) or 0.4 inches (for the narrower slot).
Warranty and Support
Satechi products are covered by a 2-year limited warranty against defects in materials and workmanship under normal use. For warranty claims or technical assistance, please contact Satechi customer support.
Satechi Customer Support:
- Visit the official Satechi website for support resources and contact information: satechi.net/pages/contact-us
- For general inquiries or to explore more Satechi products, visit the Satechi Store on Amazon: Satechi Amazon Store