Introduction
Thank you for choosing the Keurig K-Compact Single-Serve K-Cup Pod Coffee Maker. This manual provides essential information for the safe and efficient operation of your new coffee maker. Please read all instructions carefully before use and retain this manual for future reference.
Image: The Keurig K-Compact coffee maker in black, with a white mug filled with freshly brewed coffee, emitting steam.
Important Safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions.
- Do not touch hot surfaces. Use handles and knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
- Do not use appliance for other than intended use.
Setup and First Brew
Before using your Keurig K-Compact coffee maker for the first time, it is recommended to perform an initial rinse and a cleansing brew cycle.
- Unpack and Place: Remove all packaging materials and place the coffee maker on a stable, level surface.
- Rinse Water Reservoir: Remove the water reservoir from the back of the brewer. Rinse it thoroughly with fresh water.
- Fill Water Reservoir: Fill the reservoir with fresh water up to the MAX fill line. Do not overfill.
- Power On: Plug the coffee maker into a grounded outlet. Press the power button. The power indicator light will illuminate.
- First Cleansing Brew: Place a large mug (at least 10 oz.) on the drip tray. Lift and lower the brewer handle without inserting a K-Cup pod. Select a brew size (e.g., 10 oz.). The brewer will dispense hot water. Discard the hot water. The brewer is now ready for use.
Image: A top-down view of the Keurig K-Compact coffee maker, showing the clear water reservoir on the right and the control panel with power and brew size buttons on the left.
Operating Instructions
Follow these steps to brew a single cup of coffee or dispense hot water.
Brewing a K-Cup Pod
- Fill Water Reservoir: Ensure the water reservoir is filled with fresh water. The 'Add Water' indicator will light up if the water level is low.
- Place Mug: Place a mug on the drip tray.
- Insert K-Cup Pod: Lift the brewer handle. Place a K-Cup pod into the K-Cup pod holder. Lower the handle completely to close the lid.
- Select Brew Size: Choose your desired brew size (6 oz., 8 oz., or 10 oz.) by pressing the corresponding button. The selected button will flash while brewing.
- Enjoy: Your coffee will brew in under a minute. Once brewing is complete, the button will stop flashing. Carefully remove the used K-Cup pod and discard it.
Dispensing Hot Water
To dispense hot water for tea, instant soup, or other purposes:
- Ensure the water reservoir is filled.
- Place a mug on the drip tray.
- Lift and lower the brewer handle without inserting a K-Cup pod.
- Select your desired cup size. The brewer will dispense hot water.
Image: A close-up view of the Keurig K-Compact's control panel, showing the power button, 'Add Water' indicator, and three brew size buttons (6 oz, 8 oz, 10 oz).
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Keurig K-Compact coffee maker.
Cleaning the Exterior
- Unplug the brewer before cleaning.
- Wipe the exterior with a damp, soapy cloth. Rinse thoroughly.
- Do not immerse the brewer in water or other liquids.
Cleaning the Drip Tray
- The drip tray can accumulate drips and spills. Remove the drip tray and empty it.
- Wash the drip tray and its cover with warm, soapy water. Rinse thoroughly and dry.
Cleaning the K-Cup Pod Holder
- The K-Cup pod holder can be removed for cleaning.
- Separate the funnel from the pod holder. Wash both parts with warm, soapy water.
- Ensure the exit needle is clear of any coffee grounds. A paper clip can be used to clear any blockages.
Descaling
Over time, calcium deposits (scale) can build up in your brewer. Descaling helps maintain the brewer's performance. The frequency of descaling depends on the mineral content of your water. It is generally recommended every 3-6 months.
- Prepare Descaling Solution: Empty the water reservoir and remove any K-Cup pod. Pour a full bottle of Keurig Descaling Solution into the water reservoir. Fill the empty bottle with water and pour it into the reservoir.
- First Descaling Brew: Place a large mug on the drip tray. Lift and lower the handle. Select the largest brew size. Discard the hot water. Repeat this process until the 'Add Water' light illuminates.
- Soak: Let the brewer stand for at least 30 minutes.
- Rinse Brews: After soaking, empty the reservoir and rinse it thoroughly with fresh water. Fill the reservoir with fresh water up to the MAX fill line. Perform at least 12 cleansing brews (without a K-Cup pod) using the largest brew size, refilling the reservoir with fresh water as needed.
Troubleshooting
If you encounter issues with your Keurig K-Compact, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Brewer does not power on. | No power, or power button not pressed. | Ensure the brewer is plugged into a working outlet. Press the power button. |
| 'Add Water' light is on. | Water reservoir is low or empty. | Fill the water reservoir with fresh water to the MAX fill line. |
| Coffee is not brewing. | No water, K-Cup pod not properly seated, or air in lines. | Check water level. Ensure K-Cup pod is correctly inserted and handle is fully lowered. Perform a cleansing brew without a K-Cup to clear air. |
| Coffee tastes weak or watery. | Incorrect brew size selected, or K-Cup pod is old. | Use a smaller brew size (e.g., 6 oz.) for a stronger brew. Use fresh K-Cup pods. |
| Brewer is leaking. | Drip tray is full, or water reservoir is not seated correctly. | Empty the drip tray. Ensure the water reservoir is securely in place. |
Specifications
- Model: MAIN-85544
- Brand: Keurig
- Color: Black
- Special Feature: Removable Tank
- Style: Classic
- Operation Mode: Fully Automatic
- Number of Items: 1
- Human Interface Input: Buttons
- Product Dimensions: 9.1 x 9.1 x 9.1 inches
- Item Weight: 7.92 pounds
- UPC: 656942731658
Warranty and Support
For specific warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Keurig website. As this product may be a renewed item, warranty terms may vary. Please consult your retailer or the Amazon Renewed Guarantee for details regarding your specific purchase.
For further assistance, you may also contact Keurig customer service directly.
