VOVO TCB-8100W

VOVO STYLEMENT TCB-8100W Smart Bidet Toilet User Manual

Model: TCB-8100W

Introduction

This user manual provides detailed instructions for the installation, operation, and maintenance of your VOVO STYLEMENT TCB-8100W Smart Bidet Toilet. Please read this manual thoroughly before installation and use to ensure proper function and safety. This smart bidet toilet features an automatic dual flush system, wireless remote control, heated seat, warm water wash, air dryer, and an automatic deodorization system, all designed for enhanced hygiene and comfort.

VOVO STYLEMENT TCB-8100W Smart Bidet Toilet

Figure 1: VOVO STYLEMENT TCB-8100W Smart Bidet Toilet, an elongated one-piece toilet with a sleek design.

Safety Information

Always adhere to the following safety precautions to prevent injury or damage to the product:

Product Overview

The VOVO STYLEMENT TCB-8100W is designed with advanced features for optimal comfort and hygiene.

Key Features:

Automatic Dual Flush System

Figure 2: Illustration of the automatic dual flush system, which differentiates between large and small flushes based on user detection.

Soft Close Seat

Figure 3: The soft-close function of the seat and seat cover, preventing slamming and ensuring safety.

Heated Seat, Warm Dryer, and Deodorization

Figure 4: Visual representation of the heated seat, warm air dryer, and automatic deodorization features.

3-in-1 Stainless Steel Nozzle and Self-Cleaning Function

Figure 5: Diagram showing the 3-in-1 full stainless steel nozzle for posterior, feminine, and turbo wash, along with its self-cleaning mechanism.

Setup and Installation

Proper installation is crucial for the optimal performance and longevity of your smart bidet toilet. It is highly recommended to have this unit installed by a licensed plumber and electrician.

Pre-Installation Checklist:

Installation Steps:

  1. Prepare the Area: Turn off the water supply to the existing toilet and flush to empty the tank. Disconnect the water supply line and remove the old toilet. Clean the flange area thoroughly.
  2. Standard Installation Diagram

    Figure 6: Diagram illustrating the standard installation process, including water valve connection.

  3. Install the Mounting Hardware: Place the new wax ring and secure the mounting bolts to the floor flange.
  4. Position the Toilet: Carefully lower the VOVO STYLEMENT TCB-8100W onto the mounting bolts, ensuring it is level and stable. Tighten the nuts securely.
  5. Internal Components Diagram

    Figure 7: An exploded view showing the internal components and how they connect during installation.

  6. Connect Water Supply: Connect the flexible water supply hose from the toilet to the water shut-off valve. Ensure all connections are tight to prevent leaks.
  7. Water Valve Connection

    Figure 8: Close-up of connecting the water supply line to the toilet's water valve.

  8. Connect Power: Plug the power cord into a grounded 120V AC electrical outlet.
  9. Power Outlet Connection

    Figure 9: Illustration of plugging the toilet's power cord into a standard electrical outlet.

  10. Test Functionality: Turn on the water supply. Check for leaks. Allow the toilet to fill and perform a test flush. Verify all smart features are operational.
Installation Dimensions and Power Requirement

Figure 10: Important dimensions for installation and a reminder that an electrical outlet is required.

Operating Instructions

Your VOVO STYLEMENT TCB-8100W Smart Bidet Toilet offers intuitive controls for a personalized experience.

Automatic Lid Opening:

The lid automatically opens when a user approaches the toilet, thanks to the integrated sensor at the base.

Wireless Remote Control:

The primary control for all advanced functions is the wireless remote. Familiarize yourself with the button layout for optimal use.

Wireless Remote Controller Layout

Figure 11: Detailed layout of the wireless remote controller, showing buttons for various functions like flush, wash modes, temperature, and pressure adjustments.

Wash Functions:

Drying and Deodorization:

Other Functions:

Maintenance

Regular cleaning and maintenance will ensure the longevity and hygienic operation of your smart bidet toilet.

General Cleaning:

Nozzle Cleaning:

Filter Maintenance:

Troubleshooting

If you encounter issues with your VOVO STYLEMENT TCB-8100W, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power / Unit not turning onPower cord unplugged; Circuit breaker tripped; Power outage.Check power connection; Reset circuit breaker; Verify power supply.
No water spray / Weak sprayWater supply valve closed; Water inlet filter clogged; Low water pressure.Open water supply valve; Clean water inlet filter; Ensure adequate water pressure (35 PSI minimum).
Heated seat not warmingHeated seat function off; Temperature setting too low.Activate heated seat via remote; Increase temperature setting.
Deodorizer not workingDeodorizer function off.Ensure deodorizer is enabled via remote.
Lid not opening automaticallySensor obstructed or dirty; Sensor malfunction.Clean sensor area; If problem persists, contact customer support.

If the problem persists after attempting these solutions, please contact customer support.

Specifications

AttributeDetail
BrandVOVO
Model NumberTCB-8100W
ColorWhite
Product Dimensions (D x W x H)25.9" x 15.5" x 21.4"
MaterialStainless Steel (Nozzle), Polypropylene (Seat)
Item Weight81.57 Pounds
Installation TypeFloor Mounted
ShapeElongated
Flush Volume1.12 GPF (Gallons Per Flush)
Minimum Water Pressure35 PSI
Power Source120V AC
Batteries RequiredYes (for remote control, included)

Warranty and Support

For warranty information, product registration, or technical support, please contact VOVO customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Related Documents - TCB-8100W

Preview VOVO Bidet Checkliste für externe Faktoren
Checkliste zur Fehlerbehebung für VOVO Bidet-Modelle zur Überprüfung externer Faktoren, um Probleme zu identifizieren, bevor weitere Schritte unternommen werden.
Preview VOVO External Factor Checklist for Power Issues
Troubleshooting guide for VOVO smart bidet toilets, covering common power-on issues, LED indicators, and reset procedures.
Preview VOVO Bidet External Factors Checklist for Power and Reset Issues
A comprehensive checklist from VOVO to verify external factors and troubleshoot power or reset issues for VOVO bidet models including TCB 090SA, TCB 090S, TCB 8100B, TCB 8100W, TCB 8100N, PB-707S, and PB-101S.
Preview VOVO TCB-8200SA Smart Bidet Toilet: Features & Specifications
Explore the VOVO TCB-8200SA, a one-piece floor-mount smart bidet toilet. Discover its features, technical specifications, included components, and installation notes.
Preview VOVO Smart Bidet Toilettensitz Fehlerbehebung: Externe Faktoren und Geruchsneutralisierer
Ein prägnanter Leitfaden zur Fehlerbehebung bei gängigen Problemen mit VOVO Smart Bidet Toilettensitzen, der sich auf externe Faktoren, Strom-Neustarts und Geruchsneutralisierer-Einstellungen für Modelle wie TCB-090SA und TCB-9100GA konzentriert.
Preview VOVO Bidet Toilet Nozzle Replacement and Maintenance Guide
Detailed instructions for VOVO bidet toilet nozzle replacement, internal checks, and assembly procedures. Learn how to maintain your VOVO bidet.