Piranha Mod.R.S.Lite Wheel Stand Instruction Manual

1. Product Overview

The Piranha Mod.R.S.Lite (Modular Racing Stand Lite) is designed to enhance your sim racing experience. Its modular and user-friendly design allows for easy setup and adjustment, accommodating various users and preferences. The stand supports a steering wheel, pedals, and a shifter, providing a stable platform for immersive gameplay. Constructed from durable alloy steel, it ensures stability even during intense racing sessions and can be folded for convenient storage when not in use.

Image 1: The Piranha Mod.R.S.Lite Wheel Stand in its assembled state, showcasing the main structure for mounting a steering wheel, pedals, and shifter.

Key Features:

• Modular design with screwable knobs and sliding panels for adjustability.
• Folds easily for convenient storage.
• Universal compatibility with most major steering wheel, pedal, and shifter brands.
• Robust alloy steel construction for stability and durability.
• Adjustable tilt, placement, and height for personalized comfort.

2. Safety Information

• Read all instructions before assembly and use.
• Ensure all screws and bolts are securely tightened before use to prevent instability.
• Keep hands and fingers clear of moving parts during adjustment.
• Do not exceed the weight capacity of the stand (specific weight capacity not provided, use common sense for racing peripherals).
• Place the stand on a flat, stable surface to prevent tipping.
• Keep away from children and pets during assembly and use.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Main Wheel Stand Frame (pre-assembled sections)
• Steering Wheel Plate
• Pedal Plate
• Shifter Mount (optional, if included)
• Assembly Hardware (screws, bolts, washers)
• Allen Key (for adjustments and assembly)
• Instruction Manual

4. Setup and Assembly

Assembly typically takes minutes due to the modular design. Follow these steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Attach Pedal Plate: Secure the pedal plate to the main frame using the provided screws and bolts. Ensure it is oriented correctly for your preferred pedal setup.


Image 2: Side view of the wheel stand, illustrating the attachment point for the pedal plate to the main frame.

3. Attach Steering Wheel Plate: Mount the steering wheel plate to the vertical support column. Use the Allen key to tighten the adjustment knobs, allowing for initial height and tilt settings.


Image 3: An angled view of the wheel stand, highlighting the adjustable vertical column and the steering wheel plate attachment.

4. Install Shifter Mount (if applicable): If your model includes a shifter mount, attach it to the designated side of the steering wheel support structure.
5. Mount Peripherals: Attach your steering wheel, pedals, and shifter (if applicable) to their respective plates using their original mounting hardware. The stand features pre-drilled holes for universal compatibility.


Image 4: The Piranha Mod.R.S.Lite Wheel Stand fully assembled with a steering wheel and pedal set mounted, ready for use.

6. Final Tightening: Once all components and peripherals are mounted, ensure all adjustment knobs and bolts are securely tightened using the provided Allen key.

5. Operating Instructions (Adjustments)

The Mod.R.S.Lite offers various adjustment points for optimal comfort and ergonomics:

• Height Adjustment: Loosen the screwable knobs on the vertical support column to slide the steering wheel plate up or down. Retighten firmly once the desired height is achieved.
• Tilt Adjustment: The steering wheel plate can be tilted. Loosen the relevant bolts, adjust the angle, and then retighten.
• Pedal Plate Position: The pedal plate's position can be adjusted forward or backward along the base. Loosen the securing bolts, slide to the desired position, and retighten.
• Shifter Mount Position: If using a shifter mount, its height and angle can typically be adjusted by loosening its specific bolts or knobs.

Always ensure all adjustments are securely locked in place before beginning a racing session to prevent movement and ensure stability.

6. Maintenance

• Cleaning: Wipe down the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Inspection: Periodically check all screws, bolts, and adjustment knobs to ensure they remain tight. Retighten as necessary.
• Storage: When not in use, the stand can be folded for compact storage. Ensure all peripherals are removed before folding. Store in a dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.