1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your EMKE Flat Panel Bathroom Radiator. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: EMKE Flat Panel Bathroom Radiator (762x400 mm, White)
2. Safety Instructions
- Ensure the radiator is installed by a qualified professional in accordance with local building and plumbing regulations.
- Do not cover the radiator with flammable materials.
- Keep children and pets away from the hot surface of the radiator during operation.
- Before any maintenance or cleaning, ensure the heating system is turned off and the radiator has cooled down.
- This radiator is designed for use with hot water central heating systems. Do not connect to other systems unless explicitly stated.
3. Package Contents
Verify that all components are present before beginning installation:
- EMKE Flat Panel Bathroom Radiator (1 unit)
- Mounting Kit (4 blind plugs, 4 dowels, 4 long screws, 4 small screws, 4 rubber rings)
- Assembly Manual (this document)
Note: The valve is not included in the delivery and must be purchased separately.
Image 3.1: Included Mounting Accessories (Valve not included)
4. Setup and Installation
The EMKE bathroom radiator is designed for flexible installation and compatibility with standard heating systems.
4.1 Wall Mounting
The radiator is designed for wall mounting. Ensure the wall surface is suitable to bear the weight of the radiator when filled with water.
- Marking Drill Holes: Carefully measure and mark the positions for the mounting brackets on the wall. Refer to the provided dimensions and diagrams.
- Drilling: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert the supplied dowels.
- Attaching Brackets: Secure the mounting brackets to the wall using the long screws.
- Adjustable Wall Distance: The wall distance can be adjusted between 99-115 mm to suit your installation needs. Adjust the brackets before securing the radiator.
Image 4.1: Adjustable Wall Distance (99-115 mm) and Construction Details
4.2 Connection Options
The radiator features standard G1/2" connections with a 50 mm connection distance, compatible with common heating systems. Connection is possible on either the left or right side for maximum flexibility.
- Side Connection: The radiator can be connected from the left or right side. Ensure the flow and return pipes are correctly identified and connected to the appropriate inlets/outlets on the radiator valve.
- Valve Installation: Install the appropriate radiator valve (not included) according to its manufacturer's instructions.
- Sealing: Use suitable sealing materials (e.g., PTFE tape or hemp) on all threaded connections to prevent leaks.
Image 4.2: Flexible Side Connection (Left or Right) and Universal G1/2" Thread
5. Operating Instructions
Once installed and connected to your hot water central heating system, the EMKE radiator will provide efficient heat. The open design allows for comfortable hanging and quick drying of towels.
- System Activation: Ensure your central heating system is operational and the radiator valve is open.
- Bleeding the Radiator: After initial installation or if the radiator feels cold at the top, it may need bleeding to release trapped air. Use a radiator key to slowly open the bleed valve until water starts to emerge, then close it.
- Temperature Control: Adjust the room temperature using your central heating thermostat or the radiator valve.
Image 5.1: Efficient Heat Dissipation and Towel Drying Functionality
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EMKE radiator.
- Cleaning: Clean the radiator regularly with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the powder coating.
- Inspecting for Leaks: Periodically check all connections for any signs of leaks. Tighten connections if necessary, but do not overtighten.
- Bleeding: If you notice cold spots on the radiator or reduced heating efficiency, bleed the radiator as described in the operating instructions.
7. Troubleshooting
If you encounter issues with your EMKE radiator, consider the following common solutions:
- Radiator not heating:
- Check if the central heating system is on and functioning correctly.
- Ensure the radiator valve is fully open.
- Bleed the radiator to release trapped air.
- Radiator heating unevenly (cold at top):
- This usually indicates trapped air. Bleed the radiator.
- Leaking connections:
- Turn off the heating system and allow the radiator to cool.
- Carefully tighten the leaking connection. If the leak persists, consult a qualified plumber.
For persistent issues, please contact EMKE customer support.
8. Specifications
Key technical specifications for the EMKE Flat Panel Bathroom Radiator (Model SFTR7640X1W-ADR):
| Feature | Specification |
|---|---|
| Model Number | SFTR7640X1W-ADR |
| Dimensions (H x W) | 762 x 400 mm |
| Color | White |
| Material | Low-carbon steel |
| Heating Power | 342 W |
| Recommended Room Size | Up to 3.4 m² |
| Connection Thread | G1/2" |
| Connection Distance | 50 mm |
| Installation Method | Wall mounting |
| Adjustable Wall Distance | 99-115 mm |
| Weight | 8.5 kg |
Image 8.1: Detailed Specifications Table (Note: Image shows multiple sizes, refer to table above for specific model)
9. Warranty and Support
EMKE is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, EMKE offers first-class service even after your purchase.
If you have any questions, require technical assistance, or need to report an issue, please contact EMKE customer support through the retailer where you purchased the product or visit the official EMKE website for contact information.
Image 9.1: EMKE Customer Support
