1. Introduction
Thank you for choosing the EMKE Flat Panel Bathroom Radiator and Towel Warmer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new radiator. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: EMKE Flat Panel Bathroom Radiator, Anthracite, 1320x600 mm. This image shows the complete radiator unit mounted on a wall.
2. Safety Instructions
- Installation must be carried out by a qualified professional in accordance with local building and plumbing regulations.
- Ensure the wall is suitable to bear the weight of the radiator when filled with water.
- Do not cover the radiator with flammable materials.
- Keep children away from the hot surface of the radiator to prevent burns.
- The product does not include valves. Appropriate valves must be purchased separately and installed correctly.
- Before any maintenance or repair, ensure the heating system is depressurized and cooled down.
3. Package Contents
Please check that all components are present and undamaged before proceeding with installation. The package includes:
- 1x EMKE Flat Panel Bathroom Radiator
- 1x Mounting Kit (includes blind plugs, dowels, long screws, small screws, rubber rings)
- 1x Installation Instructions (in German, English translation provided in this document)
Note: Valves are NOT included in the delivery and must be purchased separately.
Image 3.1: Included Accessories and Packaging. This image displays the mounting hardware (blind plugs, dowels, screws) and the four-layer packaging process for safe transport.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | SFTR1360X1A |
| Dimensions (H x W) | 1320 x 600 mm |
| Product Dimensions (L x W x H) | 132 x 60 x 5.9 cm |
| Weight | 18.2 kg |
| Power Output (at ΔT=50) | 798 W |
| Material | Carbon Steel (conforms to BS EN 442) |
| Color | Anthracite |
| Connection Thread | G1/2" |
| Connection Distance | 50 mm |
| Adjustable Wall Distance | 99-115 mm (from wall to outer edge) |
| Pressure Tolerance | 5 bar |
| Recommended Water Inlet/Outlet Temperature | 75°C / 65°C |
| Heating Method | Hot Water |
| Installation Method | Wall Mounting |
Image 4.1: Technical Specifications and Dimensions. This image provides a detailed diagram and table outlining various dimensions, power outputs, and weights for different radiator sizes.
5. Setup and Installation
5.1 Wall Mounting
The radiator is designed for wall mounting. Ensure the chosen wall is structurally sound and capable of supporting the weight of the radiator when filled with water. Use the provided mounting kit.
5.2 Connection Options
The radiator features a universal G1/2" thread connection with a 50 mm distance. It can be installed with connections on either the left or right side by simply reversing the unit. This flexibility allows for optimal placement in your bathroom.
Image 5.1: Flexible Installation. This image illustrates how the radiator can be installed with either left or right side connections, highlighting the G1/2" thread and 50mm connection distance.
5.3 Adjustable Wall Distance
The radiator's design allows for an adjustable distance from the wall, ranging from 99 mm to 115 mm (from the wall to the outer edge of the radiator). This feature aids in installation and ensures proper air circulation.
Image 5.2: Optimal Bathroom Heat and Adjustable Wall Distance. This image shows the adjustable wall distance (99-115mm) and highlights the high-quality SPCC steel construction with environmentally friendly coating and 360° welding.
6. Operating Instructions
The EMKE Flat Panel Bathroom Radiator functions as both a room heater and a towel warmer/dryer. It is designed for hot water heating systems.
6.1 Heating Performance
With a power output of 798W, this radiator efficiently heats an area of approximately 8 square meters. The flat tube design increases the contact surface, promoting faster towel drying and effective heat distribution.
Image 6.1: High Thermal Conductivity. This image illustrates the radiator's ability to provide comfortable warmth and efficiently dry towels due to its large surface area.
6.2 Water Temperature
For optimal performance, the recommended water inlet temperature is 75°C and the outlet temperature is 65°C. Ensure your heating system is configured to these parameters for best results.
7. Maintenance
- Cleaning: Clean the radiator regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the anthracite finish.
- Bleeding: Periodically bleed the radiator to remove any trapped air, which can reduce heating efficiency. Consult your heating system's manual for specific instructions on bleeding radiators.
- Inspections: Regularly check all connections for leaks. If any leaks are detected, contact a qualified plumber immediately.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radiator not heating up | Trapped air in the system | Bleed the radiator to release air. |
| Radiator partially cold | Uneven water flow or trapped air | Bleed the radiator. Check system pressure. |
| Water leakage from connections | Loose connections or faulty seals | Tighten connections carefully. If leakage persists, contact a qualified plumber. |
| Low heating efficiency | Low system pressure or incorrect valve settings | Check heating system pressure. Ensure radiator valves are fully open. |
9. Warranty and Support
EMKE products are manufactured to high-quality standards. For any issues or support inquiries, please contact your retailer or EMKE customer service. Keep your proof of purchase for warranty claims.
For further assistance, please refer to the contact information provided with your purchase or visit the official EMKE website.
