Yupiteru SN-R11 Rear Drive Recorder Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Yupiteru SN-R11 Rear Drive Recorder. Please read this manual thoroughly before using the device to ensure safe and optimal performance. The SN-R11 is designed specifically for rear-view recording, featuring high-resolution video capture, STARVIS technology for enhanced low-light performance, High Dynamic Range (HDR), built-in GPS, a G-sensor for impact detection, and Wi-Fi connectivity for smartphone integration.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.

• Yupiteru SN-R11 Rear Drive Recorder Unit
• Power Cable
• Mounting Bracket (Adhesive Type)
• 32GB MicroSD Card (OP-SD32M)
• Instruction Manual (this document)

3. Product Overview

Familiarize yourself with the components of your SN-R11 drive recorder.

Image: Yupiteru SN-R11 Rear Drive Recorder unit. This image shows the compact, cylindrical design of the device, typically mounted on the rear window.

3.1 Device Components

• Lens: Captures video footage. Ensure it is clean and unobstructed.
• Indicator Lights: Provide status information (e.g., recording, Wi-Fi connection).
• MicroSD Card Slot: Insert the provided 32GB MicroSD card here.
• Power Input Port: Connect the power cable here.
• Mounting Point: For attaching the adhesive mounting bracket.

4. Setup and Installation

Follow these steps for proper installation of your SN-R11 drive recorder.

4.1 Choosing a Mounting Location

• Select a position on the rear window that provides a clear, unobstructed view of the road behind your vehicle.
• Ensure the device does not obstruct the driver's view or interfere with vehicle operations.
• Clean the chosen area on the window thoroughly before mounting.

4.2 Mounting the Device

1. Attach the adhesive mounting bracket to the SN-R11 unit.
2. Remove the protective film from the adhesive pad on the bracket.
3. Firmly press the device with the bracket onto the cleaned rear window surface. Hold for at least 30 seconds to ensure a strong bond.
4. Adjust the lens angle to capture the desired field of view.

4.3 Connecting Power

1. Connect the power cable to the power input port on the SN-R11 unit.
2. Route the power cable neatly along the vehicle's interior trim to avoid interference with driving.
3. Plug the other end of the power cable into your vehicle's 12V accessory power outlet (cigarette lighter socket).

4.4 Inserting the MicroSD Card

1. Ensure the device is powered off.
2. Carefully insert the provided 32GB MicroSD card into the MicroSD card slot until it clicks into place.
3. To remove, gently push the card in until it springs out.

5. Operating Instructions

5.1 Powering On/Off

• The SN-R11 will automatically power on and begin recording when your vehicle's ignition is turned on.
• The device will automatically power off when the ignition is turned off.

5.2 Automatic Recording

Upon powering on, the device automatically starts continuous loop recording. Video files are saved in segments (e.g., 1-minute clips). When the MicroSD card is full, the oldest files will be overwritten by new recordings.

5.3 Event Recording (G-Sensor)

The built-in G-sensor detects sudden impacts or rapid acceleration/deceleration. When an event is detected, the current recording segment is automatically locked and saved to a protected folder on the MicroSD card, preventing it from being overwritten by loop recording.

5.4 Parking Surveillance (Optional)

If your vehicle's power supply supports continuous power or if an optional hardwire kit is installed, the SN-R11 may offer parking surveillance mode. In this mode, the device can record events (e.g., impacts) while the vehicle is parked and the ignition is off. Refer to the Yupiteru website or contact support for details on compatible accessories for parking surveillance.

6. Wi-Fi Connectivity and App Usage

The SN-R11 features Wi-Fi connectivity, allowing you to connect your smartphone via a dedicated application for enhanced control and viewing.

6.1 Connecting to the App

1. Download the official Yupiteru drive recorder app from your smartphone's app store.
2. Turn on the SN-R11.
3. Enable Wi-Fi on your smartphone and connect to the SN-R11's Wi-Fi network (SSID and password can be found in the device's settings or on a label on the unit).
4. Open the Yupiteru app. The app should automatically detect and connect to the drive recorder.

6.2 App Functions

• Live View: View real-time footage from the rear camera on your smartphone.
• Playback: Access and play back recorded video files directly from the MicroSD card.
• Settings: Adjust various device settings, such as video resolution, G-sensor sensitivity, and Wi-Fi password.
• File Download: Download important video clips from the drive recorder to your smartphone.

7. Maintenance

7.1 MicroSD Card Management

• It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the Yupiteru app.
• Use only high-quality, genuine MicroSD cards from reputable brands.

7.2 Cleaning the Lens

Periodically clean the camera lens with a soft, lint-free cloth to ensure clear video quality. Avoid using abrasive cleaners.

7.3 Firmware Updates

Check the official Yupiteru website periodically for available firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the update carefully.

8. Troubleshooting

If you encounter issues with your SN-R11, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Yupiteru customer support.

9. Specifications

Technical specifications for the Yupiteru SN-R11 Rear Drive Recorder.

10. Warranty and Support

Yupiteru products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Yupiteru website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or inquiries about accessories, please visit the official Yupiteru support website or contact their customer service department. Contact information can typically be found on the Yupiteru website or in the product packaging.

No official product videos were provided for embedding in this manual.