1. Introduction
This manual provides instructions for the proper installation and maintenance of your Pro Chaser Air Filter. This air filter is designed as a replacement part for specific Toro 22" Recycler Lawn Mower models. Regular replacement of your air filter is crucial for maintaining engine performance and longevity.
2. Safety Information
- Always turn off the lawn mower engine and disconnect the spark plug wire before performing any maintenance.
- Allow the engine to cool down before handling any components.
- Wear appropriate personal protective equipment, such as gloves, to prevent injury.
- Refer to your lawn mower's original owner's manual for specific safety precautions and procedures.
3. Package Contents
Verify that all items are present in your package:
- 2 x Pro Chaser Air Filters
- 2 x Pre-Filters
4. Installation Guide
Follow these steps to replace the air filter in your Toro 22" Recycler Lawn Mower:
- Prepare the Mower: Ensure the engine is off and cool. Disconnect the spark plug wire for safety.
- Locate Air Filter Housing: Identify the air filter housing, typically located on the side of the engine.
- Open Housing: Unclip or unscrew the cover of the air filter housing.
- Remove Old Filter: Carefully remove the old air filter and pre-filter. Note their orientation.
- Clean Housing: Wipe away any dirt or debris from inside the air filter housing.
- Install New Pre-Filter: Place the new pre-filter over the new air filter.
- Install New Air Filter: Insert the new air filter assembly into the housing, ensuring it fits securely and in the correct orientation.
- Close Housing: Reattach the air filter housing cover and secure it with clips or screws.
- Reconnect Spark Plug: Reconnect the spark plug wire.
Important: A minor difference in carburetor design may result in a different model. Please carefully check if the pictures match with your current air filter before installation. If unsure, contact support.
5. Function and Compatibility
The Pro Chaser Air Filter is designed to protect your lawn mower engine from dust and debris, ensuring optimal performance and fuel efficiency. This filter is compatible with the following Toro 22" Recycler Lawn Mower models:
- Toro 20045, 20043, 20042, 20041, 20037, 20036
- Toro 20033, 20030, 20023C
Note: Always verify the dimensions and appearance of your existing filter against the product images to ensure proper fitment.

Image: Pro Chaser Air Filter showing its dimensions: 130mm (5.12 inches) in length, 111mm (4.4 inches) in width, and 20mm (0.8 inches) in thickness. This visual aid helps confirm compatibility.
6. Maintenance
Regular inspection and replacement of your air filter are essential for engine health.
- Inspection: Check the air filter every 25 hours of operation or at least once per mowing season. If it appears dirty, clogged, or damaged, replace it.
- Replacement Frequency: Replace the air filter annually or more frequently if operating in dusty conditions.
- Cleaning: Do not attempt to wash or clean the paper element of the air filter. Replace it with a new one. The pre-filter can sometimes be gently cleaned, but replacement is recommended if heavily soiled.
7. Troubleshooting
If you experience issues after replacing the air filter, consider the following:
- Poor Engine Performance: Ensure the air filter is installed correctly and the housing is sealed. A loose or improperly seated filter can allow unfiltered air into the engine.
- Filter Does Not Fit: Double-check the model numbers of your lawn mower and compare your old filter's dimensions with the specifications provided. Contact support if there's a discrepancy.
- Excessive Smoke: While not directly caused by the air filter, a severely clogged filter can sometimes lead to rich fuel mixtures. Ensure the filter is clean and properly installed.
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Air Filter |
| Brand | Pro Chaser |
| Model Number | Filter |
| Compatibility | Toro 22" Recycler Lawn Mowers (Models: 20045, 20043, 20042, 20041, 20037, 20036, 20033, 20030, 20023C) |
| Dimensions (Approx.) | Length: 130mm (5.12"), Width: 111mm (4.4"), Thickness: 20mm (0.8") |
| UPC | 748521730302 |
| Included Components | 2 Air Filters, 2 Pre-Filters |
9. Warranty Information
This Pro Chaser Air Filter comes with a 90-day manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, or normal wear and tear.
10. Customer Support
If you have any questions regarding the installation, compatibility, or performance of your Pro Chaser Air Filter, please contact our customer support.
For assistance, refer to the contact information provided by your retailer or visit the official Pro Chaser website.