Momax Baby Bassinet Bedside Sleeper Instruction Manual

Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Momax Baby Bassinet Bedside Sleeper. Please read all instructions carefully before use and retain this manual for future reference. This product is designed to provide a secure and comfortable sleeping environment for infants from birth up to 12 months, or until they can push up on their hands and knees, whichever comes first.

Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always ensure the bassinet is placed on a firm, horizontal floor.
• Do not use the bassinet if any parts are missing, damaged, or broken. Contact the manufacturer for replacement parts.
• Do not use accessories or replacement parts other than those approved by the manufacturer.
• The maximum weight for this bassinet is 9 kg (20 lbs) or until the infant begins to push up on hands and knees, whichever comes first.
• To prevent falls, do not use this product when the infant begins to push up on hands and knees, or has reached 9 kg (20 lbs), or is over 12 months old.
• Never leave an infant unattended in the bassinet.
• Keep all cords, strings, and small items away from the bassinet to prevent strangulation hazards.
• Ensure all locking mechanisms are engaged before placing an infant in the bassinet.
• When used as a bedside sleeper, ensure the bassinet is securely attached to the adult bed and there are no gaps between the bassinet and the adult mattress.
• Do not use the bassinet in an inclined position unless specifically instructed for medical reasons by a healthcare professional.
• Regularly check the bassinet for loose fasteners, worn material, or sharp edges.

Package Contents

Please verify that all components are present before assembly. If any parts are missing, do not proceed with assembly and contact customer support.

• Bassinet Frame (Aluminum)
• Bassinet Fabric/Mesh Body
• Mattress Pad
• Mosquito Net
• Storage Basket
• Wheels (with locking mechanism)
• Support Legs/Brackets
• Fasteners/Knobs for assembly (if applicable)

Setup and Assembly

Assembly typically takes approximately 5 minutes and requires no tools.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Assemble Frame: Connect the aluminum frame components according to the diagram. Ensure all connections click into place or are securely fastened with provided knobs.
3. Attach Bassinet Body: Secure the fabric and mesh bassinet body to the assembled frame. Ensure all zippers or fasteners are properly engaged.
4. Insert Mattress Pad: Place the mattress pad firmly into the base of the bassinet.
5. Attach Wheels: Insert the wheels into the designated slots on the support legs. Ensure they are securely fitted.
6. Attach Storage Basket: Secure the storage basket to the underside of the bassinet frame. Ensure it is stable and can hold items without sagging.
7. Install Mosquito Net: If desired, attach the mosquito net over the bassinet.

Figure 1: Illustration of the bassinet in normal movable mode and cradle mode. The image highlights the mechanism for switching between modes and the general structure of the bassinet.

Operating Instructions

1. Bassinet Modes (Bedside Sleeper & Standalone Bassinet)

This product offers two primary modes: a standalone bassinet and a bedside sleeper.

• Standalone Bassinet: Ensure all four sides of the bassinet are zipped up and secured. The wheels can be locked for stability or unlocked for mobility.
• Bedside Sleeper: To use as a bedside sleeper, lower one side of the bassinet. Position the bassinet flush against your adult bed. Securely attach the bassinet to the adult bed using the provided straps (if applicable, not explicitly mentioned but standard for bedside sleepers). Ensure there are no gaps between the bassinet and the adult mattress to prevent entrapment hazards.

Figure 2: The bassinet positioned next to an adult bed, illustrating its use as a bedside sleeper, allowing close proximity to the infant.

2. Height Adjustment

The bassinet features adjustable height settings, with a maximum height of 80cm. The brackets on both sides can be adjusted independently.

1. Locate the height adjustment mechanisms on each support leg.
2. Press the release buttons or turn the knobs to adjust the height of each side.
3. Ensure both sides are adjusted to the desired height and securely locked in place before use.
4. To help prevent reflux or spitting up, you can adjust one side slightly higher than the other, creating a gentle incline for the baby's head.

Figure 3: The bassinet demonstrating an adjustable angle, where one side is slightly raised to assist in preventing infant reflux.

3. Mobility and Locking Wheels

The bassinet is equipped with swivel wheels for easy movement and locking mechanisms for stability.

• Moving the Bassinet: To move the bassinet, ensure the wheel locks are disengaged. Gently push or pull the bassinet to the desired location.
• Locking the Wheels: To secure the bassinet in place, press down on the locking levers on each wheel until they click into the locked position. Verify that the bassinet does not move.

Figure 4: A user demonstrating the mobility of the bassinet, with an emphasis on the built-in anti-skid, lockable wheels for easy movement and secure parking.

4. Mosquito Net

A mosquito net is included to protect your baby from insects.

• To deploy the mosquito net, extend it over the bassinet and secure it around the edges.
• Ensure the net is taut and there are no gaps for insects to enter.

Figure 5: A woman adjusting the mosquito net over the bassinet, demonstrating its use to protect the baby from insects.

5. Storage Basket

The bassinet includes a large-capacity storage basket located underneath for baby's items.

• Use the basket to store diapers, wipes, blankets, or other essentials.
• Do not overload the basket beyond its capacity to maintain stability.

Figure 6: The bassinet featuring a spacious storage basket beneath, designed for convenient storage of baby's necessities.

Maintenance

Regular cleaning and maintenance will ensure the longevity and hygiene of your bassinet.

• Fabric Cleaning: The outer layer of the baby sleeper and all crib fabrics are designed for easy removal and cleaning. It is recommended to hand wash the fabric components. Refer to the care label for specific instructions.
• Frame Cleaning: Wipe the aluminum frame with a damp cloth and mild soap. Dry thoroughly.
• Mattress Pad: The mattress pad has a removable cover that can be washed.
• Inspection: Periodically inspect the bassinet for any signs of wear, damage, or loose fasteners. Tighten any loose screws or connections.

Figure 7: A visual representation of the bassinet's key features, including washable fabric, linen material, breathable mesh sides, and the robust load-bearing stability of its frame.

Troubleshooting

• Bassinet Tilts When Side is Down: Ensure the bassinet is securely attached to the adult bed using any provided straps. Verify that the bassinet's feet are fully extended and stable. If tilting persists, discontinue use of the side-down feature and use as a standalone bassinet with all sides up.
• Difficulty Moving Wheels: Check if the wheel locks are fully disengaged. Ensure no debris is obstructing the wheels.
• Assembly Issues: If you encounter difficulty during assembly, double-check all connections and ensure parts are oriented correctly. Refer to the assembly steps and diagrams. Do not force parts together.
• Missing Parts: If any parts are missing from the package, do not attempt to assemble or use the bassinet. Contact customer support for assistance.

Specifications

Figure 8: Detailed dimensions of the Momax Baby Bassinet Bedside Sleeper, indicating height, width, and length for reference.

Warranty and Support

For warranty information, replacement parts, or customer support, please refer to the contact information provided with your purchase or visit the official Momax website. Please retain your proof of purchase for warranty claims.