VINABTY FSR78 ZV28960 Remote Control User Manual for Yamaha Sound Bars

Introduction

This manual provides instructions for the VINABTY FSR78 ZV28960 replacement remote control. This remote is designed to function as a direct replacement for various Yamaha Sound Bar models, offering immediate usability without complex programming.

Product Overview

The VINABTY FSR78 ZV28960 remote control is an infrared (IR) device designed for seamless operation with compatible Yamaha Sound Bar systems. It features an ergonomic design for comfortable handling and includes all essential buttons for controlling your sound bar's functions.

Compatible Yamaha Sound Bar Models:

ATS-1060
YAS-106
ATS-1070
YAS-207
YAS-107
ATS-2070
YAS-CU207
NS-WSW42

Image: VINABTY FSR78 ZV28960 Remote Control. This image shows the front view of the black remote control with its various buttons.

Setup: Battery Installation

The remote control requires one CR2025 coin cell battery (not included). Follow these steps to install the battery:

Locate the battery compartment on the back of the remote control.
Gently slide open the battery tray.
Insert one CR2025 battery with the positive (+) side facing upwards.
Ensure the battery is inserted correctly. If it does not slide in easily, flip the battery over. Do not force the battery into the tray.
Slide the battery tray back into the compartment until it clicks securely into place.

Video: Yamaha Soundbar YAS106 Remote Control Replacement. This video demonstrates the unboxing and battery installation process for a similar replacement remote control.

Operating Instructions

This VINABTY remote control is designed for immediate use with compatible Yamaha Sound Bars without any programming. Simply point the remote control directly at your sound bar and press the desired function button.

Power Button: Turns the sound bar on or off.
Volume Up/Down: Adjusts the sound bar's volume level.
Input Selection: Cycles through available audio input sources (e.g., TV, Bluetooth, HDMI).
Mute Button: Mutes or unmutes the sound bar's audio output.
Sound Modes: Selects different audio presets (if available on your sound bar).

Ensure there are no obstructions between the remote control and the sound bar's IR receiver for optimal performance.

Troubleshooting

Problem	Possible Cause / Solution
Remote is not working.	Battery Check: Ensure the CR2025 battery is correctly installed with the positive (+) side up and is not depleted. Replace if necessary. Line of Sight: Verify there are no objects blocking the path between the remote control and the sound bar's infrared receiver. Distance: Ensure you are within the effective operating range (up to 10 meters).
Remote works intermittently or with delay.	Battery Level: The battery might be low. Replace the CR2025 battery. Interference: Other electronic devices might be causing IR interference. Try operating the remote in a different location or away from potential interference sources.
Specific buttons are not responding.	Compatibility: While designed for specific models, some advanced functions might not be universally supported by all compatible sound bars. Refer to your sound bar's original manual for specific feature compatibility. Damage: Inspect the remote for any physical damage to the buttons.

Specifications

Model: FSR78 ZV28960
Brand: VINABTY
Connectivity Technology: Infrared (IR)
Battery Type: 1 x CR2025 (Alkaline)
Button Quantity: 8
Maximum Range: 10 Meters (approx. 33 feet)
Special Feature: Ergonomic design
Dimensions (L x W x H): 5" x 1.9" x 0.5" (12.7 cm x 4.8 cm x 1.3 cm)
Color: Black

Warranty and Support

For warranty information or technical support regarding your VINABTY FSR78 ZV28960 remote control, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance with your Yamaha Sound Bar, please refer to the original Yamaha product manual or visit the official Yamaha support website.