Torin AXH-PPW5GB Portable Parts Washer Instruction Manual

1. Introduction

Thank you for choosing the Torin AXH-PPW5GB Portable Parts Washer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new parts washer. Please read this manual thoroughly before use and retain it for future reference.

The Torin AXH-PPW5GB is a compact and portable cleaning machine designed for degreasing small automotive parts and tools. Its design allows for easy transport and use in various settings such as garages, workshops, and homes. It features a high-efficiency submersible pump and a flow-through brush for effective cleaning with non-corrosive, water-based cleaning solutions.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or property damage.

• Always wear appropriate personal protective equipment (PPE) such as safety glasses and chemical-resistant gloves when operating the parts washer.
• Use only non-corrosive, water-based cleaning solutions. Do not use flammable solvents such as gasoline, diesel, mineral spirits, or toluene, as this can create a fire hazard and damage the unit. Refer to the solvent selection guide below.
• Ensure the parts washer is placed on a stable, level surface to prevent spills.
• Do not immerse the electrical plug or power cord in water or other liquids.
• Keep children and unauthorized persons away from the operating area.
• Unplug the unit from the power source before performing any maintenance, cleaning, or when not in use.
• Inspect the power cord and pump for damage before each use. Do not operate if damaged.
• Dispose of used cleaning solutions and waste materials according to local environmental regulations.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Figure 2.1: Solvent Selection Guide. Only use non-corrosive, water-based cleaning solutions.

3. Package Contents

Verify that all components are present and undamaged before assembly and operation. If any parts are missing or damaged, contact Torin customer service.

• Parts Washer Basin (1)
• Submersible Water Pump (1)
• Flow-Through Brush with Hose (1)

Figure 3.1: All components of the Torin AXH-PPW5GB Parts Washer.

4. Setup Instructions

1. Prepare the Basin: Place the parts washer basin onto a standard 5-gallon bucket (not included). Ensure the basin is securely seated on the bucket.
2. Install the Pump:
   • Place the submersible pump inside the basin. The pump is equipped with suction cups on its base for stability.
   • Connect the hose from the flow-through brush to the outlet port of the pump. Ensure a tight connection to prevent leaks.
   

   Figure 4.1: Parts washer components ready for assembly.

3. Add Cleaning Solution: Fill the 5-gallon bucket (with the basin on top) with your chosen non-corrosive, water-based cleaning solution. Ensure the liquid level is sufficient to fully submerge the pump.
4. Position the Brush: Place the flow-through brush within easy reach for cleaning.
5. Connect Power: Plug the pump's power cord into a grounded electrical outlet.

5. Operating Instructions

1. Power On: Once the pump is submerged and the unit is plugged in, turn on the pump. The pump typically has an integrated switch or activates upon plugging in.
2. Adjust Flow (if applicable): The pump may have a flow velocity control switch. Adjust as needed for your cleaning task.
3. Clean Parts: Use the flow-through brush to scrub the parts. The cleaning solution will be pumped through the brush bristles, aiding in the removal of dirt and grease.
4. Drainage System: The unique channel drainage system in the basin will collect small residues and cycle the clean solution back into the bucket.
5. Power Off: After cleaning, turn off the pump and unplug the unit from the power source.

Figure 5.1: Example of cleaning effectiveness.

6. Maintenance

• Regular Cleaning: Periodically clean the basin and brush to remove accumulated debris.
• Pump Inspection: Check the pump intake for blockages and clean as necessary to maintain optimal flow.
• Solution Replacement: Replace the cleaning solution regularly, especially when it becomes heavily soiled, to ensure effective cleaning.
• Storage: When not in use, clean the unit thoroughly, drain all liquids, and store it in a dry, safe place.

7. Troubleshooting

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Torin customer service.

8. Specifications

• Model: AXH-PPW5GB
• Brand: Torin
• Capacity: Designed for standard 5-gallon buckets (bucket not included)
• Item Weight: Approximately 3.5 pounds
• Product Dimensions: 13.7 x 13.7 x 5 inches (Basin)
• Cleaning Solution: Non-corrosive, water-based solutions only

9. Warranty and Support

The Torin AXH-PPW5GB Portable Parts Washer comes with a one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

What is Covered: Repair or replacement of defective parts or the entire unit.

What is Not Covered:

• Damage caused by misuse, abuse, neglect, or improper maintenance.
• Damage resulting from the use of unauthorized cleaning solutions (e.g., flammable or corrosive solvents).
• Normal wear and tear.
• Damage due to unauthorized modifications or repairs.

For warranty claims, technical support, or any questions regarding your product, please contact Torin customer service. Please have your model number (AXH-PPW5GB) and proof of purchase available when contacting support.

Contact information for Torin customer service can typically be found on the product packaging or the official Torin website.