Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your VIGO Edison Single Handle Pull-Down Sprayer Kitchen Faucet with Touchless Sensor. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.
Safety Information
- Always turn off the main water supply before beginning any installation or repair work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all connections are secure and watertight to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- The faucet requires 4 AA batteries for the touchless sensor functionality. Ensure batteries are installed correctly.
Package Contents
Verify that all components are present before beginning installation:
- Kitchen Faucet Assembly
- Mounting Hardware
- Supply Lines
- Sprayer Head
- Control Box (for sensor)
- Battery Pack (for sensor, batteries not included)
Setup and Installation
The VIGO Edison faucet is designed for single-hole deck mount installation. It uses standard US 3/8-inch plumbing connections and requires a standard 1-3/8-inch hole opening.
- Prepare the Mounting Surface: Ensure the sink or countertop has a 1-3/8 inch diameter hole. Clean the area around the hole.
- Install the Faucet: Insert the faucet body into the mounting hole. Secure it from underneath the sink using the provided mounting hardware.
- Connect Water Supply Lines: Attach the hot and cold supply lines to the corresponding water supply valves. Ensure connections are tight to prevent leaks. The faucet includes freeze-resistant metal-braided Pex lines.
- Install Sprayer Hose and Weight: Connect the pull-down sprayer hose to the faucet's main body. Attach the hose weight to the hose at the specified location to ensure proper retraction.
- Connect Sensor Control Box: Connect the sensor control box to the faucet and the battery pack. Insert 4 AA batteries (not included) into the battery pack.
- Test for Leaks: Turn on the main water supply and check all connections for leaks.
Operating Instructions
The VIGO Edison faucet offers both manual and touchless operation for convenience.
Touchless Sensor Operation
To activate water flow using the touchless sensor, simply wave your hand in front of the sensor located on the faucet body. Wave your hand again to stop the water flow. This feature promotes hygiene by reducing contact with the faucet handle.
Manual Handle Operation
The single handle controls both water flow and temperature. Lift the handle to increase flow and move it left for hot water or right for cold water.
Dual-Action Sprayer
The pull-down sprayer head features two modes: a steady stream for filling pots and a powerful spray for rinsing dishes. Toggle between these modes using the button on the sprayer head.
360-Degree Swivel Spout
The high-arc spout can swivel 360 degrees, providing ample vertical space and a broad range of motion for various kitchen tasks.
Product Video
Video 1: Official product video showcasing the features and operation of the VIGO Edison Touchless Kitchen Faucet.
Maintenance
To maintain the appearance and functionality of your VIGO Edison faucet:
- Cleaning: The faucet features a FINISHPLATED 7-layer coating process designed to resist fingerprints and water spots. Clean regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Sensor Care: Keep the sensor area clean and free from obstructions to ensure proper touchless operation.
- Battery Replacement: The touchless sensor requires 4 AA batteries. Replace batteries when the sensor responsiveness decreases or stops functioning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Touchless sensor not working or inconsistent | Low or dead batteries; Sensor obstructed; Sensor malfunction. | Replace the 4 AA batteries in the battery pack. Ensure the sensor area is clean and clear. If the issue persists, contact VIGO customer support. |
| Water flow is weak | Aerator clogged; Water supply valves not fully open; Kinked supply line. | Unscrew and clean the aerator. Ensure hot and cold water supply valves are fully open. Check supply lines for kinks. |
| Faucet leaks from connections | Loose connections; Damaged O-rings/washers. | Tighten all connections. Inspect and replace any damaged O-rings or washers. |
| Handle is loose or broken | Mounting screw loose or damaged. | Tighten the handle's set screw. If the handle is damaged, contact VIGO customer support for replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | VIGO |
| Model Name | Edison |
| Model Number | VG02001STS |
| Finish Type | Stainless Steel |
| Material | Brass |
| Mounting Type | Deck Mount |
| Number of Handles | 1 |
| Hole Count | 1 |
| Maximum Flow Rate | 1.8 Gallons Per Minute (GPM) |
| Spout Height | 6 Inches |
| Spout Reach | 8 Inches |
| Hose Length | 30 Inches (retractable) |
| Item Weight | 11 Pounds |
| Product Dimensions | 10 x 4 x 19 inches |
| Special Features | 360 Degree Spout Swivel, Secure Docking, Spot Resistant Finish, Touchless Sensor |
| Batteries Required | 4 AA batteries (not included) |
| UPC | 849922068558 |
Warranty Information
VIGO extends a limited lifetime warranty to all its kitchen faucets. This warranty provides peace of mind and assures the quality of your product. For specific terms and conditions, please refer to the official VIGO warranty documentation or contact customer support.
Customer Support
If you encounter any issues not covered in this manual, require replacement parts, or have questions regarding your VIGO Edison faucet, please contact VIGO customer support. Refer to the VIGO website or product packaging for the most current contact information.
California Residents: See Prop 65 WARNINGS for more information.
