1. Safety Information
- Read all instructions carefully before assembly and use.
- Keep small parts away from children and pets during assembly.
- Ensure all screws and connections are tightened securely before placing plants or items on the stand.
- Distribute weight evenly across the shelves to maintain stability. The maximum load capacity is 22 pounds per shelf.
- Install the provided anti-toppling straps to prevent accidental tipping, especially in households with children or pets.
- Do not overload the shelves.
- Avoid exposing the grow lights directly to water.
2. Package Contents
Please verify that all components are present before beginning assembly:
- Metal Frame (Curved Sections)
- MDF Wood Shelves (Various Sizes)
- Support Rods/Legs
- Adjustable Dual-Head LED Grow Lights (2 units)
- S-shaped Hooks (2 units)
- Anti-Toppling Straps
- Assembly Hardware (Screws, Allen Wrench)
- Instruction Manual
3. Setup and Assembly
Follow these steps to assemble your GREENSTELL Plant Stand. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the package contents list.
- Assemble Base Sections: Attach the shorter support rods to the bottom MDF shelves using the provided screws. Ensure they are firmly tightened.
- Attach Curved Metal Frames: Connect the curved metal frame sections to the assembled base units. The curved frame provides the main structure and upper shelves.
- Install Remaining Shelves: Secure the various sized MDF shelves to the metal frame and support rods according to the diagram in your printed manual.
- Attach Non-Slip Feet: Insert the non-slip feet into the bottom of the stand's legs to protect your floor and enhance stability.
- Install S-Hooks: Attach the S-shaped hooks to the designated points on the top curved frame for hanging plants.
- Secure with Anti-Toppling Straps: For added safety, attach the anti-toppling straps to the top of the stand and secure them to a wall stud using appropriate hardware (not included).
- Position Grow Lights: Clip the adjustable dual-head LED grow lights to the shelves or frame as desired. The flexible goosenecks allow for precise positioning.
Video 3.1: Assembly and feature overview of the GREENSTELL Plant Stand with Grow Lights.
4. Operating Instructions (Grow Lights)
The GREENSTELL Plant Stand includes two adjustable dual-head LED grow lights designed to promote healthy plant growth. Each light unit features a controller for various settings.
4.1 Grow Light Features:
- Adjustable Brightness: 10 levels (10% to 100%).
- 3 Color Modes: Blue light (promotes leaf growth), Red light (aids in flowering and fruiting), and Full Spectrum (combination).
- 3 Timer Settings: Automatic shut-off after 3, 6, or 12 hours.
- 360° Rotatable & Movable: Flexible goosenecks and clip-on design allow for optimal light positioning for each plant.
4.2 Using the Grow Lights:
- Power On/Off: Connect the USB plug to a compatible power adapter (not included) and press the power button on the controller.
- Adjust Brightness: Use the '+' and '-' buttons on the controller to cycle through the 10 brightness levels.
- Change Color Mode: Press the 'Mode' button to switch between Blue, Red, and Full Spectrum light modes.
- Set Timer: Press the 'Timer' button to select 3H, 6H, or 12H. The light will automatically turn off after the selected duration.
5. Maintenance
- Cleaning: The MDF board shelves are designed to be easy to care for and wipe clean. Use a soft, damp cloth to wipe away dust or spills. Avoid harsh chemicals.
- Frame Care: The metal frame can be wiped with a dry or slightly damp cloth. Avoid abrasive cleaners.
- Tighten Connections: Periodically check all screws and connections to ensure they remain tight and secure.
- Grow Light Care: Gently wipe the LED light bars with a dry cloth to remove dust. Do not immerse in water.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly | Loose screws; uneven weight distribution; uneven floor. | Tighten all assembly screws. Redistribute plants/items evenly. Place the stand on a level surface or use shims if necessary. Ensure anti-toppling straps are installed. |
| Grow lights not turning on | Not plugged in; faulty power adapter; damaged cable. | Check if the USB plug is securely connected to a working power adapter and outlet. Try a different USB power adapter. Inspect the cable for visible damage. |
| Grow lights not changing modes/brightness | Controller malfunction. | Ensure the controller buttons are pressed firmly. If issues persist, contact customer support. |
| Assembly holes do not align | Incorrect orientation of parts; manufacturing defect. | Double-check the orientation of all pieces against the assembly diagrams. If parts are still misaligned, contact customer support for assistance. |
7. Specifications
- Brand: GREENSTELL
- Model Number: hq-zwj001-01
- Product Dimensions: 22.5 x 10.6 x 66.1 inches (L x W x H)
- Item Weight: 38.6 pounds
- Material: Engineered Wood (MDF), Iron
- Finish Type: Iron
- Color: Brown
- Load Capacity: 22 Pounds per shelf
- Assembly Required: Yes
- Special Features: Adjustable Easy Install, Heavy Duty, Movable Grow Lights (Full-Spectrum LED with 10 brightness levels, 3 color modes, 3 timer settings), S-shaped hooks, Anti-toppling device.
- UPC: 810142983150
8. Warranty and Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GREENSTELL website. Please have your model number (hq-zwj001-01) and purchase date available when contacting support.
Online Support: Visit the GREENSTELL Store on Amazon
