1. Introduction
Thank you for choosing the Movado Bold Evolution Swiss Quartz Watch, Model 3600810. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
2. Product Overview
The Movado Bold Evolution watch features a 42 mm black ion-plated stainless steel case and a matching mesh bracelet. It is equipped with a black chronograph dial, offering both timekeeping and stopwatch functionalities. The watch utilizes a Swiss Quartz movement for precise timekeeping and is protected by a durable K1 mineral crystal.
Figure 1: Front view of the Movado Bold Evolution Swiss Quartz Watch.
Key Features:
- Case: 42 mm black ion-plated stainless steel.
- Bracelet: Black ion-plated stainless steel mesh.
- Movement: Swiss Quartz, battery-powered.
- Crystal: K1 Mineral, offering enhanced scratch and shatter resistance.
- Functions: Time display (analog), Chronograph (stopwatch).
- Water Resistance: Up to 30 meters (3 ATM).
3. Setup
3.1 Setting the Time
- Pull the crown (located on the right side of the watch case) out to the furthest position.
- Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Once the time is set, push the crown back into its original position to engage the movement.
3.2 Adjusting the Bracelet
The mesh bracelet features an adjustable clasp. To adjust the fit:
- Open the safety clasp.
- Using a small, flat tool (such as a jeweler's screwdriver), lift the locking plate on the main clasp.
- Slide the clasp along the mesh band to the desired length.
- Press the locking plate back down firmly to secure the clasp in place. Ensure it clicks securely.
4. Operating Instructions
4.1 Using the Chronograph Function
Your Movado Bold Evolution watch includes a chronograph, which functions as a stopwatch. The chronograph features an independent sweep second hand and sub-dials for measuring elapsed time.
- Start: Press the upper pusher button (A) to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press the upper pusher button (A) again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Reset: After stopping the chronograph, press the lower pusher button (B) to reset all chronograph hands to their zero positions.
Note: Specific sub-dial functions (e.g., 60-second, 30-minute, 24-hour) are indicated on the dial. Refer to the markings on your watch for precise readings.
5. Maintenance
Proper care ensures the longevity and optimal performance of your Movado watch.
5.1 General Care
- Avoid exposing your watch to extreme temperatures, strong magnetic fields, or harsh chemicals.
- Clean the watch case and bracelet regularly with a soft, dry cloth. For the mesh bracelet, a slightly damp cloth can be used, followed by thorough drying.
- Ensure the crown is always pushed in completely to maintain water resistance.
5.2 Water Resistance
This watch is water-resistant up to 30 meters (3 ATM). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Do not operate the crown or pushers when the watch is wet or submerged.
5.3 Battery Replacement and Servicing
The Swiss Quartz movement is powered by a battery. When the battery needs replacement, it is recommended to have it done by an authorized Movado service center. A maintenance interval of 3 to 5 years is recommended for optimal performance, in addition to any required battery replacement. Never attempt to open the watch yourself.
Figure 2: Back view of the Movado Bold Evolution watch.
6. Troubleshooting
- Watch not running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement. Contact an authorized service center.
- Time is incorrect: Reset the time as described in Section 3.1. If the time continues to be inaccurate, the watch may require servicing.
- Chronograph hands not resetting to zero: If the chronograph hands do not return to their zero position after pressing the reset button, a calibration or service may be required.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | 3600810 |
| Case Diameter | 42 Millimeters |
| Case Thickness | 10.5 Millimeters |
| Band Width | 22 Millimeters |
| Movement Type | Swiss Quartz |
| Crystal Type | K1 Mineral |
| Water Resistance Depth | 30 Meters (3 ATM) |
| Display Type | Analog |
| Additional Features | Chronograph |
8. Warranty and Support
8.1 Limited Warranty
Your Movado watch is covered by a limited warranty. This warranty typically covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear. Please refer to the warranty card included with your purchase for specific terms and conditions.
8.2 Customer Support
For warranty claims, service, or any questions regarding your Movado watch, please contact an authorized Movado retailer or visit the official Movado website for customer support information.
Figure 3: Movado Bold watch packaging.
