Introduction
Thank you for choosing the Globe Electric 57500 West 4-Light Track Lighting fixture. This modern industrial track light features a matte black finish, an adjustable center swivel bar, and pivoting track heads, making it suitable for various indoor spaces such as kitchens, hallways, dining rooms, bedrooms, and living rooms. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture.
Important Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep these instructions for future reference.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Use only GU10 Bi-Pin Twist and Click bulbs, up to 50W maximum per bulb. Compatible with LED, Incandescent, and Halogen bulbs.
- This fixture is designed for indoor use only. Do not expose to water or moisture.
- Ensure the mounting surface can support the weight of the fixture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
Package Contents
Verify that all components are present before beginning installation:
- 1x Track Bar Fixture
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Sheet
- Note: GU10 Bi-Pin Twist and Click 50W Bulbs are sold separately.
Image: Product packaging showing the track light fixture and branding.
Setup and Installation
This fixture requires ceiling mounting and assembly. Professional installation is recommended if you are not experienced with electrical wiring.
Tools Required (Not Included):
- Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
- Ladder
Installation Steps:
- Turn Off Power: Before starting, ensure the power to the installation area is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Securely attach the mounting plate (included) to the ceiling junction box. Ensure the mounting surface is structurally sound.
- Wire Connections: Connect the fixture's wires to your household electrical wires. Typically, connect the black wire from the fixture to the black (live) wire from the ceiling, the white wire from the fixture to the white (neutral) wire from the ceiling, and the ground wire (bare copper or green) from the fixture to the ground wire from the ceiling. Use wire nuts (included) to secure connections and electrical tape for added insulation.
- Mount Fixture: Carefully push the wired fixture up to the ceiling and secure it to the mounting plate using the provided screws.
- Install Bulbs: Insert four (4) GU10 Bi-Pin Twist and Click bulbs (sold separately) into the track heads. Ensure bulbs are securely twisted into place.
- Restore Power: Once installation is complete, turn the power back on at the circuit breaker.
Image: Dimensional drawing showing the length (41.75 inches), width (4.75 inches), and adjustable height (up to 14.25 inches) of the track lighting fixture.
Image: The track lighting fixture installed above a kitchen island with four bar stools, demonstrating its application in a kitchen setting.
Image: The track lighting fixture illuminating a contemporary kitchen island with black bar stools, showcasing its modern aesthetic.
Image: The track lighting fixture mounted in a living room above a television, demonstrating its versatility for general and accent lighting.
Operating Instructions
Turning On/Off:
Operate the fixture using a standard wall light switch connected to the circuit. Ensure the switch is in the "ON" position for the lights to function.
Adjusting Light Direction:
- Pivoting Track Heads: Each of the four track heads can be individually pivoted to direct light where needed. Gently adjust the heads to illuminate specific areas or objects.
- Center Swivel Bar: The central bar of the fixture can be swiveled, allowing for broader adjustment of the overall light distribution.
Dimmable Functionality:
This fixture is fully dimmable when used with compatible dimmer switches and dimmable GU10 bulbs (both sold separately). To adjust brightness, use the connected dimmer switch according to its manufacturer's instructions.
Maintenance
Cleaning:
- Always disconnect power before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Bulb Replacement:
- Ensure power is off and bulbs have cooled completely before attempting to replace them.
- Gently twist and pull the old GU10 bulb to remove it.
- Insert a new GU10 Bi-Pin Twist and Click bulb, aligning the pins and twisting to secure.
- Only use GU10 Bi-Pin bulbs with a maximum wattage of 50W.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Bulb is faulty or not installed correctly. Loose wiring connection. | Check circuit breaker or fuse. Ensure wall switch is ON. Replace bulb or re-install. Check wiring connections (with power off). |
| Lights flicker. | Loose bulb. Incompatible dimmer switch/bulb. Loose wiring connection. | Tighten bulb. Ensure dimmer and bulbs are compatible. Check wiring connections (with power off). |
| Dimmable function not working. | Non-dimmable bulbs used. Incompatible dimmer switch. Dimmer switch not installed correctly. | Use only dimmable GU10 bulbs. Ensure dimmer switch is compatible with LED/Halogen/Incandescent bulbs. Consult an electrician for dimmer switch installation. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Globe Electric |
| Model Number | 57500 |
| Style Name | West |
| Color | Matte Black |
| Material | Metal |
| Light Fixture Form | Track Light Head |
| Number of Light Sources | 4 |
| Bulb Base | GU10 Bi-Pin Twist and Click |
| Max Wattage per Bulb | 50 Watts |
| Voltage | 120 Volts |
| Dimmable | Yes (with compatible dimmer switch and bulbs) |
| Power Source | Hardwired |
| Indoor/Outdoor Usage | Indoor |
| Dimensions (L x W x H) | 41.75" x 4.75" x 14.25" (adjustable height) |
| Item Weight | 3.63 Pounds |
| Required Assembly | Yes |
| Certification | UL Listed |
Warranty Information
This product is covered by a Manufacturer Warranty. For specific details regarding the terms and conditions of your warranty, please refer to the documentation included with your purchase or visit the official Globe Electric website. Please note that the provided data indicates "No warranty" for the manufacturer warranty description, however, standard product warranties typically apply. Contact Globe Electric directly for clarification.
Customer Support
For technical assistance, missing parts, or any questions regarding your Globe Electric 57500 West 4-Light Track Lighting fixture, please contact Globe Electric customer service. You can typically find contact information on the product packaging or on the official Globe Electric website.
Visit the Globe Electric Store on Amazon for more products and information.
