Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GLOBE Electric Martes 1-Light Outdoor/Indoor Wall Sconce, Model 44862. This versatile wall sconce features a vintage industrial design with a matte black finish and a hammered metallic interior, suitable for both indoor and outdoor environments, offering water resistance for various applications.
Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other hazards that could cause injury or death.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Use only with a 120V, 60Hz power supply.
- Ensure all connections are secure and properly insulated.
- This product is designed for use with one E26/Medium Base 60W maximum bulb (sold separately).
- If dimming functionality is desired, use a compatible dimmer switch (sold separately).
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Wall Sconce Fixture
- 1 x Mounting Hardware Kit
- 1 x Instruction Sheet (this manual)
Setup and Installation
The Martes wall sconce is designed for easy wall-mount installation. Follow these steps carefully:
- Prepare for Installation:
- Turn off power at the circuit breaker or fuse box to avoid electrical shock.
- Ensure the mounting surface is clean, dry, and structurally sound.
- Unpack the fixture and mounting hardware.
- Attach Mounting Plate:
- Secure the mounting plate (included in hardware kit) to the junction box using the provided screws. Ensure the plate is level.
Image: Detail of the mounting plate, showing attachment points.
- Make Electrical Connections:
- Connect the fixture's black wire to the house's black (hot) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire to the house's ground wire (or to the mounting plate if no house ground is available).
- Secure all connections with wire nuts (included) and wrap with electrical tape for added safety.
- Mount the Fixture:
- Carefully align the fixture with the mounting plate and secure it using the provided screws or nuts.
Image: The Martes wall sconce, fully installed and illuminated.
- Install Bulb:
- Screw one E26/Medium Base 60W maximum bulb (not included) into the socket.
Image: The Martes wall sconce, installed but unlit, showing the bulb socket.
- Restore Power:
- Turn the power back on at the circuit breaker or fuse box.
- Test the light fixture.
Operating Instructions
The Martes wall sconce operates via a standard wall light switch. If a compatible dimmer switch is installed, you can adjust the light intensity.
- Turning On/Off: Use the connected wall light switch to turn the fixture on or off.
- Dimming (Optional): If a compatible dimmer switch is installed, rotate or slide the dimmer control to adjust the brightness level of the light.
Maintenance
Regular maintenance ensures optimal performance and longevity of your wall sconce.
- Cleaning:
- Before cleaning, ensure the power is turned off at the circuit breaker.
- Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement:
- Turn off power at the circuit breaker before replacing the bulb.
- Allow the bulb to cool completely before touching it.
- Unscrew the old bulb and replace it with a new E26/Medium Base 60W maximum bulb.
Troubleshooting
If you experience issues with your wall sconce, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty bulb. |
Check circuit breaker. Ensure all wire connections are secure (power off first). Replace bulb. |
| Light flickers. | Loose bulb. Incompatible dimmer switch. Loose wiring connection. |
Tighten bulb. Ensure dimmer is compatible with bulb type. Check wiring connections (power off first). |
| Fixture is not securely mounted. | Mounting screws are loose. | Tighten mounting screws. Ensure mounting plate is firmly attached to the junction box. |
Specifications
Key technical specifications for the Martes 1-Light Wall Sconce:
| Brand | Globe Electric |
| Model Name | Martes |
| Model Number | 44862 |
| Color | Matte Black |
| Material | Metal |
| Product Dimensions | 9.22"L x 7.81"W x 9.86"H (23.4cm L x 19.9cm W x 25cm H) |
| Item Weight | 1.49 Pounds (0.67 kg) |
| Power Source | Hardwired |
| Voltage | 120 Volts |
| Wattage | 60 Watts (Max) |
| Bulb Base | E26 (Medium Base) |
| Number of Light Sources | 1 |
| Dimmable | Yes (with compatible dimmer switch, sold separately) |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Water Resistance Level | Water Resistant |
| Control Method | Touch (typically via wall switch) |
| Switch Type | Wall Light Switch |
| Included Components | Wall Sconce, Mounting Hardware, Instruction Sheet |
Image: Dimensional drawing of the Martes wall sconce.
Warranty
This GLOBE Electric product comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Globe Electric website or contact their customer support.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Globe Electric website or contact their customer service department. Contact information can typically be found on the manufacturer's website or product packaging.
You can also visit the Globe Electric Store on Amazon for more products and information.
