Steve Silver Furniture Pendleton Counter Stool TN600CS Instruction Manual

Introduction

This manual provides essential instructions for the assembly, use, and maintenance of your Steve Silver Furniture Pendleton Counter Stool, Model TN600CS. Please read all instructions carefully before assembly and use to ensure safe and proper operation.

Image: Two Pendleton Counter Stools in an ivory finish, showcasing their design and color.

Safety Information

• Always follow assembly instructions carefully.
• Do not exceed the maximum weight recommendation of 200 pounds.
• Ensure all bolts and screws are securely tightened before use and periodically check for tightness.
• Keep small parts away from children during assembly.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Stool Seat (1)
• Legs (4)
• Front Stretcher (1)
• Side Stretchers (2)
• Hardware Pack (bolts, washers, Allen wrench)

Setup (Assembly Instructions)

Assembly is required for this counter stool. It is recommended to assemble the stool on a soft, clean surface to prevent scratching.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts listed in the 'Package Contents' section are present.
2. Attach Legs to Seat: Securely attach the four legs to the underside of the stool seat using the provided bolts and washers. Do not fully tighten bolts at this stage.
3. Install Stretchers: Attach the front stretcher between the two front legs and the side stretchers between the side legs. These stretchers improve structural stability and strength. Use the provided hardware and do not fully tighten yet.
4. Final Tightening: Once all components are loosely assembled, place the stool upright on a flat surface. Apply gentle downward pressure to ensure all parts are aligned. Then, systematically tighten all bolts and screws using the Allen wrench until secure. Do not overtighten.
5. Check Stability: Gently rock the stool to ensure it is stable and all connections are firm.

Image: Product dimensions for assembly reference.

Image: Detail of the shaped seat and brass galley rail.

Operating (Usage)

The Pendleton Counter Stool is designed for comfortable seating at counter-height surfaces. Its shaped seat and sturdy construction provide a reliable seating option.

• Seating: Sit centrally on the stool for optimal balance and comfort.
• Weight Limit: Do not exceed the maximum weight capacity of 200 pounds to prevent damage or injury.
• Placement: Use on a flat, stable surface. Avoid placing on uneven ground.

Maintenance

Proper care will extend the life and appearance of your counter stool.

• Cleaning: Wipe the stool with a damp cloth to clean. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary.
• Environmental Conditions: Avoid prolonged exposure to direct sunlight or extreme humidity, which can affect wood furniture.

Troubleshooting

If you encounter issues with your counter stool, consider the following common solutions:

• Wobbling: If the stool wobbles, check that all assembly bolts are securely tightened. Loosen all bolts slightly, place the stool on a flat surface, apply gentle pressure to the seat, and then retighten all bolts evenly.
• Loose Parts: If any parts feel loose, immediately stop using the stool and tighten all connections.
• Damage: For significant damage, discontinue use and contact customer support.

Specifications

Warranty Information

For detailed warranty information regarding your Steve Silver Furniture Pendleton Counter Stool, please refer to the product description on the original purchase platform or the official Steve Silver Furniture website. The manufacturer warranty description states: "Please refer to product description or store page."

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Steve Silver Furniture customer support through their official website or the retailer from whom you purchased the product.