1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Locinox Verticlose 2 Hydraulic Gate Closer. Designed for both 90° and 180° hinge applications, this gate closer features integrated pre-tension, adjustable closing speed, and a final snap mechanism. The Quick-Fix mounting system facilitates efficient installation, and its anodized aluminum construction ensures durability.
2. Product Features
- Micro adjustment of speed and final snap for precise gate closing.
- Includes railset for versatile installation in 90° and 180° hinge situations.
- Weatherproof, scratch-resistant, and corrosion-free anodized aluminum housing ensures longevity.
- Robust and stylish design with high-quality internal components.
- Integrated pre-tension for smooth and efficient installation.
- Consistent closing speed maintained by patented hydraulic damping technology.
- Securely fixed using the patented Quick-Fix system.
- ADA compliant (< 5 lbs; max 25 Nm) for gate widths of 4ft or more.
3. Safety Information
Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in injury or product damage.
- Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
- Ensure the gate is securely supported during installation to prevent accidental movement.
- Do not attempt to disassemble the hydraulic unit. It contains pressurized components.
- Keep hands and clothing clear of moving parts during operation and adjustment.
- This product is designed for gate closing applications only. Do not use for other purposes.
4. Setup and Installation
The Verticlose 2 is designed for efficient installation using the Quick-Fix mounting system. The included railset supports both 90° and 180° hinge configurations.
4.1 Package Contents
- Verticlose 2 Hydraulic Gate Closer unit
- Railset for 90° and 180° situations
- Quick-Fix mounting hardware
- Instruction Manual
4.2 Installation Steps
- Prepare the Gate and Post: Ensure the gate and post are structurally sound and free from obstructions.
- Mount the Quick-Fix System: Attach the Quick-Fix mounting plates to the gate and post according to the desired hinge situation (90° or 180°). Refer to the diagrams for precise positioning.
- Install the Closer Unit: Securely attach the Verticlose 2 hydraulic unit to the Quick-Fix mounting plates. The integrated pre-tension feature will assist in this step.
- Connect the Railset: Attach the appropriate railset components between the closer unit and the gate/post, ensuring proper alignment.
- Initial Adjustment: Perform an initial check of the gate's movement and make preliminary adjustments to the closing speed and final snap as described in Section 5.
Figure 1: The Locinox Verticlose 2 Hydraulic Gate Closer shown with its main cylindrical body and the two railset arms for mounting.
5. Operation and Adjustment
The Verticlose 2 allows for precise adjustment of the closing speed and final snap to suit specific gate requirements.
5.1 Adjusting Closing Speed
Locate the speed adjustment screw on the closer unit. Turning the screw clockwise will decrease the closing speed, making the gate close slower. Turning it counter-clockwise will increase the closing speed, making the gate close faster. Make small adjustments and test the gate's movement after each adjustment.
5.2 Adjusting Final Snap
The final snap adjustment controls the force with which the gate latches shut in the last few degrees of closing. Locate the final snap adjustment screw. Turning it clockwise will increase the snap force, while turning it counter-clockwise will decrease it. Adjust as needed to ensure the gate securely latches without excessive force.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Verticlose 2 gate closer.
- Cleaning: Periodically clean the exterior of the closer unit and railset with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
- Inspection: Annually inspect all mounting hardware for tightness. Check the railset for any signs of wear or damage.
- Lubrication: The hydraulic unit is sealed and does not require internal lubrication. Ensure any moving pivot points on the railset are free of obstruction.
- Performance Check: Periodically check the closing speed and final snap. Readjust if necessary due to environmental changes or wear.
7. Troubleshooting
This section addresses common issues you might encounter with your Verticlose 2 gate closer.
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate closes too fast/slow | Speed adjustment incorrect | Adjust the closing speed screw (refer to Section 5.1). |
| Gate does not latch securely | Final snap adjustment incorrect | Adjust the final snap screw (refer to Section 5.2). |
| Gate binds or sticks | Obstruction in gate path or hinge issues | Check for physical obstructions. Inspect gate hinges for proper function and lubrication. |
| Closer unit leaking fluid | Internal seal failure | Contact Locinox customer support for assistance. Do not attempt to repair. |
8. Technical Specifications
| Model Number | VERTICLOSE-2-9005 |
| Brand | Locinox |
| Material | Aluminum |
| Color | Black |
| Exterior Finish | Black |
| Item Weight | 11.53 pounds |
| Product Dimensions | 2.5 x 3 x 15.5 inches |
| Installation Type | Screw-In |
| Recommended Uses | Commercial buildings, high-traffic areas |
| Specification Met | ADA |
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact Locinox customer service directly. Refer to the official Locinox website or your purchase documentation for contact details.
