Introduction
The InBody 970 BCA is an advanced body composition analyzer designed for precise and comprehensive health assessment. This medical-grade diagnostic tool provides detailed insights into body fat, muscle mass, water levels, and segmental analysis, utilizing multi-frequency Bioelectrical Impedance Analysis (BIA) technology.
Key features include:
- Comprehensive Body Composition Analysis: Accurately measures body fat percentage, skeletal muscle mass, body water levels, visceral fat, and more.
- Advanced Multi-Frequency BIA Technology: Ensures reliable and clinically accurate results.
- User-Friendly Touchscreen Interface: High-resolution display and intuitive menu system for ease of use.
- Fast, Non-Invasive Testing: Delivers results in under 60 seconds without discomfort.
- Ideal for Health Professionals & Institutions: Suitable for gyms, wellness clinics, physiotherapy centers, corporate wellness programs, and hospitals.
Setup Guide
Follow these steps to set up your InBody 970 BCA for first use.
1. Unboxing and Placement
Carefully remove all components from the packaging. Place the InBody 970 on a flat, stable, and non-conductive surface. Ensure there is sufficient space around the device for safe operation and user movement.
Figure 1: The InBody 970 Body Composition Analyzer. This image shows the complete unit, including the base platform, central column, and the upper display unit with hand electrodes.
Figure 2: Dimensions of the InBody 970. The image illustrates the height (1239mm), width (614mm), and depth (964mm) of the device, along with its weight (46kg) and measurement ranges for weight (5.0-300.0kg) and height (110-220cm).
2. Power Connection
Connect the power adapter to the designated port on the InBody 970 and then plug it into a standard electrical outlet. Use only the power adapter supplied with the device.
3. Initial Power On
Press the power button, usually located on the side or back of the display unit. The device will perform a self-check and display the main operating screen.
Operating Instructions
The InBody 970 is designed for intuitive operation via its touchscreen interface.
1. Preparing for a Measurement
- Ensure the subject has not eaten or exercised vigorously for at least 2-3 hours prior.
- The subject should remove shoes, socks, and any heavy clothing or metallic objects.
- Wipe the foot electrodes on the platform and hand electrodes on the handles with an InBody tissue or a clean, damp cloth to ensure good conductivity.
Figure 3: A person standing correctly on the InBody 970 for a measurement. The user stands barefoot on the foot electrodes and holds the hand electrodes, ensuring proper contact for accurate readings.
2. Performing a Test
- On the touchscreen, select "Start Test" or the equivalent option.
- Enter the subject's height, age, and gender as prompted.
- Instruct the subject to step onto the platform, placing their bare feet on the designated foot electrodes.
- Have the subject grasp the hand electrodes firmly, ensuring their thumbs are on the oval electrodes and their arms are straight, not touching their body.
- Instruct the subject to remain still and silent during the measurement, which typically takes less than 60 seconds.
Figure 4: A user positioned on the InBody 970, demonstrating the correct posture for a body composition analysis. The user is standing upright, holding the hand electrodes, and looking straight ahead.
Figure 5: Detailed view of the InBody 970 display during a measurement, showing various body composition metrics. This image highlights the comprehensive data provided, including muscle mass and fat mass for different body segments.
3. Reviewing Results
Once the test is complete, the results will be displayed on the screen. The InBody 970 provides a detailed report sheet that can be printed or saved. This report includes:
- Body Composition Analysis (Total Body Water, Protein, Minerals, Body Fat Mass)
- Muscle-Fat Analysis (Weight, Skeletal Muscle Mass, Body Fat Mass)
- Obesity Analysis (BMI, Percent Body Fat)
- Segmental Lean Analysis (Right Arm, Left Arm, Trunk, Right Leg, Left Leg)
- Body Composition History
- InBody Score
- Visceral Fat Level
- Research Parameters
Figure 6: Example of the InBody 970's digital display showing measurement results. This screen provides a summary of key metrics like weight, skeletal muscle mass, body fat mass, BMI, and percent body fat, with indicators for low, standard, and high ranges.
Figure 7: Close-up of the InBody 970's touchscreen interface, highlighting the multi-frequency technology (8 frequencies) and the availability of 6 types of result printouts. This image emphasizes the advanced diagnostic capabilities of the device.
Maintenance
Proper maintenance ensures the longevity and accuracy of your InBody 970.
Cleaning
- Regularly wipe down the device, especially the electrodes, with a soft, damp cloth.
- For disinfection, use a mild, non-abrasive disinfectant solution. Do not spray liquids directly onto the device.
- Ensure the device is powered off and unplugged before cleaning.
- Do not use harsh chemicals, abrasive cleaners, or solvents.
Storage
When not in use, store the InBody 970 in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and moisture.
Troubleshooting
This section addresses common issues you might encounter with your InBody 970.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power cable not connected properly; power outlet issue. | Check power cable connection. Try a different power outlet. Ensure power button is pressed. |
| Measurement error or inconsistent results. | Poor electrode contact; subject movement; incorrect posture; environmental interference. | Ensure electrodes are clean and subject's skin is moist. Instruct subject to remain still and maintain correct posture. Minimize electronic interference. |
| Touchscreen unresponsive. | Temporary software glitch; screen calibration issue. | Restart the device. If issue persists, contact customer support. |
| Cannot print results. | Printer not connected; printer error; no paper/ink. | Check printer connection and status. Ensure printer has paper and ink. Refer to printer's manual for troubleshooting. |
Specifications
Detailed technical specifications for the InBody 970 BCA.
| Feature | Detail |
|---|---|
| Brand | InBody |
| Model Number | InBody 970 |
| Colour | White |
| Recommended Uses | Humans |
| Special Feature | Body Fat Analysis |
| Display Type | Digital |
| Material | Plastic |
| Net Quantity | 1.0 count |
| Included Components | Body Composition Analyzer |
| Measurement Method | Multi-frequency Bioelectrical Impedance Analysis (BIA) |
| Test Duration | Under 60 seconds |
Warranty Information
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official InBody website. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
If you require further assistance, technical support, or have questions regarding your InBody 970, please contact InBody customer service. You can find contact information on the official InBody website or through the retailer where you purchased the device.
Visit the official InBody Store on Amazon: InBody Store
