Panasonic DP-UB9000P1K 4K Ultra HD Blu-ray Player Instruction Manual

1. Overview

The Panasonic DP-UB9000P1K is a reference-class 4K Ultra HD Blu-ray player designed to deliver exceptional video and audio performance. It features an HCX (Hollywood Cinema Experience) processor for optimized color, clarity, and detail in 4K/HDR formats, including HDR10+ and Dolby Vision. This player also incorporates advanced analog audio circuits with a dedicated power supply, high-performance D/A converter, and XLR balanced outputs for a superior audio experience.

Figure 1: Front view of the Panasonic DP-UB9000P1K Blu-ray player. This image displays the front panel of the player, featuring the power button on the left, the disc tray in the center, a display screen below the tray, and control buttons on the right.

2. Setup

2.1 Unpacking and Placement

• Carefully remove the player and all accessories from the packaging. Ensure the remote control is present.
• Place the player on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.
• The player's dimensions are approximately 16.9 inches (W) x 11.8 inches (D) x 3.2 inches (H), and it weighs 17.2 pounds.

Figure 2: Dimensions of the Panasonic DP-UB9000P1K Blu-ray player. An angled view of the player with its dimensions labeled: 16.9 inches wide, 11.8 inches deep, and 3.2 inches high.

2.2 Connections

Connect the player to your television, audio system, and network using the appropriate cables. Refer to the diagram below for port identification.

Figure 3: Key features and connections diagram. This diagram shows the front and rear of the player with numbered callouts indicating: 1. Alumite-treated aluminum chassis, 2. HCX (Hollywood Cinema Experience) processor, 3. Balanced XLR output, 4. Analog 7.1ch + 2ch (RCA) output, 5. Twin HDMI outputs, and 6. Optical and Coaxial audio output.

• HDMI Connection: Use an HDMI cable to connect the player's HDMI output to your TV or AV receiver. The player features twin HDMI outputs for separate audio and video signals if desired.
• Audio Connections: For high-fidelity audio, utilize the 2-channel balanced XLR outputs, 7.1-channel analog RCA outputs, or digital optical/coaxial audio outputs.
• Network Connection: Connect an Ethernet cable to the LAN port for a wired network connection, or configure Wi-Fi during initial setup.
• USB: A USB port is available for media playback from external storage devices.

2.3 Power Connection

After all other connections are made, plug the power cord into the player and then into a wall outlet. The power supply is AC 120 V, 60 Hz.

3. Operating Instructions

3.1 Basic Disc Playback

1. Press the power button to turn on the player.
2. Press the Eject button on the front panel or remote control to open the disc tray.
3. Place a Blu-ray disc or DVD onto the disc tray with the label side facing up.
4. Press the Eject button again to close the tray. The player will begin reading the disc.
5. Use the Play, Pause, Stop, and Skip buttons on the remote control to manage playback.

3.2 4K UHD Streaming

The player supports 4K UHD streaming from services such as Netflix and Prime Video. Ensure the player is connected to the internet and you have active subscriptions to these services. Navigate to the streaming apps from the player's home menu.

3.3 High-Resolution Audio Playback

The DP-UB9000P1K supports various high-resolution audio formats, including ALAC, WAV, AIFF, DSD, and FLAC, providing studio-quality sound. Connect the player to a compatible audio system using the analog or digital audio outputs for optimal performance.

3.4 Voice Control

This player is compatible with Amazon Alexa and Google Assistant (sold separately) for convenient voice control. Follow the instructions provided with your voice assistant device to link it with the Panasonic DP-UB9000P1K.

4. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the player. Do not use liquid or aerosol cleaners.
• Disc Handling: Always handle discs by their edges. Avoid touching the playback surface. Store discs in their cases when not in use to prevent scratches and dust accumulation.
• Firmware Updates: The player can receive automatic firmware updates when connected to the internet. It is recommended to enable this feature to ensure optimal performance and access to the latest features.

5. Troubleshooting

If you encounter issues with your player, please refer to the following common solutions:

• Disc Playback Issues: If discs pixelate or freeze, ensure the disc is clean and free of scratches. While the player is designed to handle minor imperfections, severely damaged discs may still cause issues.
• No Picture/Sound: Verify all HDMI and audio cables are securely connected. Check the input selection on your TV and AV receiver.
• Accidental Menu Changes: The player's menus offer extensive customization. If you accidentally activate an unfamiliar setting (e.g., a visually impaired assistance mode), navigate through the menus carefully to locate and disable it. If unsure, a factory reset may be an option, but consult the full digital manual for specific steps.
• No Power: Ensure the power cord is firmly plugged into both the player and a working electrical outlet.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

The Panasonic DP-UB9000P1K typically includes a 90-day labor warranty. For full details regarding your product's warranty coverage, please refer to the warranty card included with your purchase or visit the official Panasonic support website.

7.2 Customer Support

For further assistance, technical support, or service inquiries, please contact Panasonic customer support. You can find contact information and additional resources on the official Panasonic website: www.panasonic.com.