100W Bluetooth Speaker Instruction Manual

Introduction

This manual provides detailed instructions for the operation and maintenance of your xdobo X8 MAX 100W Portable Wireless Bluetooth Speaker. Designed for superior audio performance, this speaker delivers powerful deep bass and clear stereo sound, suitable for various environments from indoor gatherings to outdoor adventures. Please read this manual thoroughly to ensure proper use and to maximize your listening experience.

What's in the Box

• Bluetooth speaker
• 3.5mm audio cable
• TF card slot (TF card not included)
• Shoulder strap
• User Manual

Product Overview

The xdobo X8 MAX speaker, showcasing its sleek black design and top-mounted control panel.

Internal Components

An exploded view illustrating the internal speaker configuration: two 78MM 35W woofers, two 80MM bass amplifiers, and two 52MM 15W tweeters.

Dimensions

The speaker's dimensions are approximately 300mm (length) x 100mm (width) x 134mm (height).

Ports and Controls

The speaker features an AUX input, TF-Card slot, USB port, and a Type-C charging port, all protected by a rubber flap.

Setup

Charging the Speaker

Before first use, fully charge the speaker. Connect the provided Type-C cable to the speaker's charging port and a compatible USB power adapter (not included). The 20000mAh battery provides up to 12 hours of playtime at lowest volume. Charging time is approximately 8 hours. The speaker can also function as a power bank to charge your mobile devices in an emergency.

The speaker charging a mobile phone, demonstrating its power bank capability.

Detailed battery information: 8 hours charging, 12 hours usage, 168 hours standby.

Bluetooth Pairing

1. Power on the speaker by pressing and holding the power button. The Bluetooth indicator will flash, indicating it's in pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "XDOBO X8 MAX" from the list. Once connected, the Bluetooth indicator will remain solid.

True Wireless Stereo (TWS) Pairing

To achieve a true wireless stereo experience with two X8 MAX speakers:

1. Ensure both X8 MAX speakers are powered off.
2. Power on both speakers simultaneously.
3. On one of the speakers (this will be your primary speaker), press and hold the TWS button (often labeled 'M' or a specific TWS icon) until you hear a pairing tone.
4. The speakers will automatically connect to each other. Once paired, the TWS indicator on both speakers will light up.
5. Connect your device to the primary speaker via Bluetooth as described above. Audio will now play in synchronized stereo across both speakers.

Two X8 MAX speakers set up for True Wireless Stereo, enhancing the audio experience.

Video demonstrating the TWS pairing process and sound quality of the Xdobo X8 MAX speaker.

Operating Instructions

Power On/Off

Press and hold the power button located on the top panel to turn the speaker on or off.

EQ Modes

The X8 MAX features 3 equalizer audio modes to optimize sound for different content:

• Full Frequency (Default): Balanced sound profile.
• Vocals: Enhances vocal clarity.
• Bass: Boosts low-frequency response for deeper bass.

Press the 'EQ' button on the control panel to cycle through the available modes. The EQ indicator light will change color to indicate the active mode (e.g., green for Vocals, blue for Bass, etc.).

The control panel showing the EQ button and its indicator light.

Volume Control

Use the '+' and '-' buttons on the top panel to adjust the volume. Press '+' to increase volume and '-' to decrease volume.

Voice Assistant

Short press the microphone button on the control panel to activate the voice assistant on your connected Bluetooth device. You can then speak commands through the speaker's built-in microphone.

Using AUX, TF Card, and USB Modes

The speaker supports multiple input sources:

• AUX Mode: Connect an external audio device using the included 3.5mm audio cable to the AUX port. The speaker will automatically switch to AUX mode.
• TF Card Mode: Insert a micro SD (TF) card into the TF card slot. The speaker will automatically detect and play audio files from the card.
• USB Mode: Insert a USB flash drive into the USB port. The speaker will automatically detect and play audio files from the drive.

Maintenance

• Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Waterproof: The speaker is IPX5 waterproof, meaning it can withstand splashes and light rain. Do not submerge the speaker in water. Ensure the port cover is securely closed before exposure to water.

Troubleshooting

Specifications

Warranty and Support

The xdobo X8 MAX speaker comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or contact xdobo customer support.

For technical assistance, troubleshooting, or any product-related inquiries, please visit the official xdobo website or contact their customer service team. Keep your purchase receipt for warranty claims.