1. Introduction
Thank you for choosing the Beghelli Zafiro R7S LED Lamp. This manual provides important information regarding the safe installation, operation, and maintenance of your new LED lamp. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
Always observe the following safety precautions to reduce the risk of fire, electric shock, or injury:
- Ensure the power supply is disconnected before installing, removing, or servicing the lamp.
- This lamp is designed for indoor use unless otherwise specified.
- Do not use with dimmers unless explicitly stated as dimmable.
- Do not disassemble or modify the lamp.
- Keep away from water and high humidity.
- If the lamp is damaged, do not use it. Contact qualified personnel for replacement.
3. Setup and Installation
The Beghelli Zafiro R7S LED lamp is designed for easy replacement of traditional R7S halogen lamps. Follow these steps for safe installation:
- Turn off Power: Before starting, ensure the power supply to the fixture is completely turned off at the circuit breaker or fuse box.
- Allow Cooling: If replacing an old lamp, allow it to cool down completely before handling.
- Remove Old Lamp: Carefully remove the existing R7S lamp from its fixture.
- Insert New Lamp: Gently insert the Beghelli Zafiro R7S LED lamp into the R7S socket. Ensure both ends of the lamp are securely seated in the contacts. Do not force the lamp into the socket.
- Restore Power: Once the lamp is securely installed, restore power to the fixture.
Image: The Beghelli Zafiro R7S LED lamp, showing its elongated cylindrical shape and R7S base connections at both ends. The central part of the lamp is a yellow LED array encased in a clear protective housing, with the 'Beghelli' logo visible on the side.
4. Operating Instructions
The Beghelli Zafiro R7S LED lamp operates immediately upon receiving power. Once installed in a compatible R7S fixture and power is supplied, the lamp will illuminate. There are no specific operational controls on the lamp itself; operation is controlled by the fixture's switch.
5. Maintenance
LED lamps require minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Cleaning: Ensure the lamp is cool and the power is off before cleaning. Wipe the lamp gently with a soft, dry, lint-free cloth. Do not use liquid or abrasive cleaners.
- Inspection: Periodically check the lamp and fixture for any signs of damage or loose connections.
- Replacement: If the lamp stops functioning, ensure the power is off before carefully removing and replacing it with a new, compatible R7S LED lamp.
6. Troubleshooting
If your Beghelli Zafiro R7S LED lamp is not functioning as expected, consider the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | No power to the fixture; Lamp not properly seated; Faulty lamp or fixture | Check power supply/circuit breaker; Re-seat the lamp firmly; Test with another known good lamp or check fixture wiring. |
| Lamp flickers | Incompatible dimmer; Loose connection; Voltage fluctuations | Ensure fixture is not on a dimmer or use a compatible LED dimmer; Check lamp seating; Consult an electrician for voltage issues. |
| Lamp is too dim | Incorrect lamp wattage for application; Aging lamp | Verify the lamp's lumen output meets your needs; Replace lamp if it's nearing end of life. |
7. Specifications
Detailed technical specifications for the Beghelli Zafiro R7S LED Lamp:
- Brand: Beghelli
- Model: Zafiro R7S LED 118MM 1450LM 10W 4K
- Manufacturer Part Number: 56498
- Wattage: 10 watts
- Light Type: LED
- Length: 118MM
- Lumen Output: 1450 LM
- Color Temperature: 4K (4000K, Cool White)
- Number of Items: 1
- Batteries Required: No
8. Recycling and Disposal
Proper disposal of electrical and electronic equipment is important for environmental protection. LED lamps, while more energy-efficient and longer-lasting than traditional bulbs, should not be disposed of with general household waste.
- Recycling: Please recycle this product at designated collection points for electrical and electronic equipment. Check with your local authorities for information on recycling facilities in your area.
- Broken Lamps: If a lamp breaks, avoid direct contact with broken glass. Carefully sweep up fragments using a stiff brush and dispose of them in a sealed container. Do not use a vacuum cleaner. Ensure the area is well-ventilated during cleanup.
9. Warranty and Support
For information regarding warranty terms, technical support, or service, please refer to the Beghelli official website or contact your local distributor. Keep your purchase receipt as proof of purchase.
