TAMIYA Team Hahn Racing MAN TGS TT-01E Electric Kit Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your TAMIYA Team Hahn Racing MAN TGS 4 Wheel Drive On Road TT-01E Electric Kit. Please read this manual thoroughly before beginning assembly or operation to ensure correct procedures and safe use. Retain this manual for future reference.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the product.

• This product is not a toy. It is intended for users aged 14 years and older.
• Always operate the model in a safe, open area away from people, pets, and obstacles.
• Keep fingers, hair, and loose clothing away from moving parts.
• Do not operate the model near water or in wet conditions.
• Ensure all batteries are charged correctly and handled according to their manufacturer's instructions.
• Disconnect the battery from the model when not in use.
• Use only genuine TAMIYA parts or recommended compatible components.

Kit Contents

Verify that all components listed below are present in your kit before beginning assembly. If any parts are missing or damaged, contact your retailer.

• TT-01E Chassis parts
• MAN TGS Truck Body parts (unpainted)
• Electric Motor
• Electronic Speed Controller (ESC)
• Wheels and Tires
• Decal sheet
• Hardware (screws, nuts, washers, etc.)
• Instruction Manual (this document)

Required for Operation (Not Included)

The following items are necessary to complete and operate your TAMIYA TT-01E kit and are sold separately:

• 2-channel RC radio system (transmitter, receiver, servo)
• 7.2V NiMH battery pack or compatible LiPo battery pack
• Compatible battery charger
• Polycarbonate paint for the body
• Basic modeling tools (hobby knife, screwdrivers, pliers, scissors, body reamer)
• Adhesives (e.g., CA glue for tires)

Setup and Assembly

Follow the detailed step-by-step instructions provided in the included printed manual for precise assembly. The general sequence of assembly is outlined below.

1. Chassis Assembly

Begin by assembling the TT-01E chassis components. This involves constructing the gearbox, suspension arms, shock absorbers, and drive shafts. Pay close attention to the orientation of parts and the correct application of grease where indicated.

Image: The TAMIYA TT-01E chassis, showing the motor, electronic speed controller, and suspension components. This forms the base of the RC truck.

Install the electric motor into the motor mount. Ensure proper gear mesh between the pinion gear and the spur gear to prevent premature wear.

2. Electronic Component Installation

Mount the Electronic Speed Controller (ESC) and the steering servo onto the chassis using the provided hardware. Connect the motor to the ESC, and the ESC and steering servo to the receiver. Route all wires neatly to avoid interference with moving parts.

3. Wheel and Tire Assembly

Assemble the wheels and tires. If the tires are not pre-mounted, carefully glue them to the wheel rims using appropriate tire glue. Mount the assembled wheels onto the chassis axles.

4. Body Preparation and Mounting

The polycarbonate truck body requires cutting, painting, and decal application. Carefully cut out the body shell along the marked lines. Wash the inside of the body with mild detergent and water, then dry thoroughly. Apply polycarbonate-specific paint to the inside of the body. Once dry, apply the included decals according to the reference images.

Image: Front view of the fully assembled TAMIYA Team Hahn Racing MAN TGS RC truck, showcasing the detailed body shell with sponsor decals.

Image: Rear three-quarter view of the fully assembled TAMIYA Team Hahn Racing MAN TGS RC truck, highlighting the chassis and rear wheel arches.

Once the body is complete, mount it onto the chassis using the body posts and clips. Adjust the body height as desired.

Operating Instructions

1. Pre-Run Checks

• Ensure the battery pack is fully charged and securely installed in the chassis.
• Turn on the transmitter first, then the receiver/ESC.
• Check steering and throttle response. Ensure the steering servo operates smoothly and the wheels turn correctly.
• Verify that all screws are tight and no parts are loose.

2. Driving the Model

Start by driving slowly to familiarize yourself with the model's handling characteristics. The TT-01E chassis is designed for on-road performance. Avoid rough terrain or obstacles that could damage the chassis or body.

• Use smooth throttle and steering inputs for optimal control.
• Practice turning and braking in an open area.
• Monitor battery life and stop operation when performance degrades to prevent over-discharging.

3. Post-Run Procedure

• Turn off the receiver/ESC first, then the transmitter.
• Disconnect and remove the battery pack from the model.
• Inspect the model for any damage or loose parts.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your TAMIYA RC truck.

• Cleaning: After each run, clean dirt and debris from the chassis, suspension, and drivetrain using a soft brush or compressed air.
• Inspection: Periodically check all screws for tightness. Inspect gears for wear, and replace if necessary. Check suspension components for damage or excessive play.
• Lubrication: Apply appropriate grease to moving parts in the gearbox and differentials as recommended in the assembly manual. Avoid over-lubrication.
• Battery Care: Store batteries in a cool, dry place. Follow battery manufacturer guidelines for charging and storage.
• Tire Care: Inspect tires for wear and damage. Clean tires to maintain grip.

Troubleshooting

Specifications

• Model: TAMIYA Team Hahn Racing MAN TGS (TT-01E Chassis)
• Model Number: TAM58632A
• Scale: 1/14th
• Chassis Type: TT-01E (4WD On-Road)
• Drive System: Shaft-driven 4WD
• Motor: Included (Type 540 brushed motor)
• ESC: Included (Tamiya TBLE-02S or similar)
• Product Dimensions: 19.2 x 9.2 x 8.7 inches (approximate, assembled)
• Item Weight: 4.8 pounds (approximate, kit only)
• Recommended Age: 14 years and up

Warranty and Support

TAMIYA products are manufactured to high standards. For warranty information, please refer to the documentation included with your purchase or visit the official TAMIYA website. For technical support or inquiries regarding parts, please contact your local TAMIYA distributor or authorized service center. Keep your proof of purchase for warranty claims.

Online Resources: For additional assembly tips, tuning guides, and community forums, search for "TAMIYA TT-01E" online.