AEG DPS5650AM

AEG DPS5650AM Cooker Hood Instruction Manual

Model: DPS5650AM | Brand: AEG

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AEG DPS5650AM cooker hood. Designed to exceed expectations, this appliance redefines daily living by offering superior performance in air purification for your kitchen. Please read this manual thoroughly before using the appliance to ensure safe and efficient operation.

Key Features:

  • Superior Installation (PerfectFit): Designed for quick and easy installation, reducing assembly steps by 25% and offering tool-free options for single-person setup.
  • High-Performance Motor: Efficiently removes cooking odors and vapors.
  • Extendable Hood: Pulls out by 5 cm to reliably eliminate steam and odors, then retracts seamlessly into your kitchen design.
  • Integrated LED Light Bar: Illuminates the hob effectively and uniformly for better control and visibility.
AEG DPS5650AM Cooker Hood installed in a modern kitchen
The AEG DPS5650AM Cooker Hood, showcasing its sleek design and integrated lighting.

2. Setup and Installation

The AEG DPS5650AM cooker hood is designed for straightforward installation, whether for extraction or recirculation. Follow these steps for optimal setup.

What's in the Box:

  • 2 x Metal Grease Filters
  • Stainless Steel Front Panel
  • Instruction Manual

Installation Guidelines:

  1. Unpacking: Carefully remove all packaging materials and inspect the appliance for any damage.
  2. Mounting: The cooker hood is designed for wall mounting. Utilize the PerfectFit system for an easy and secure installation. Ensure the mounting surface is sturdy enough to support the hood's weight (11.5 kg).
  3. Ducting (if applicable): For extraction mode, connect the hood to an appropriate ventilation duct. Ensure the ducting is correctly sized and sealed to prevent air leaks.
  4. Electrical Connection: Connect the hood to a 220 Volt power supply. Ensure all electrical connections comply with local regulations.
  5. Filter Installation: Insert the metal grease filters and, if using recirculation mode, the carbon filters (sold separately) into their designated slots.
PerfectFit installation system for AEG cooker hood
The PerfectFit system allows for smooth and uncomplicated installation, even by a single person.
Technical drawing with dimensions of the AEG DPS5650AM cooker hood
Detailed dimensions of the AEG DPS5650AM cooker hood for precise installation planning.

3. Operating Instructions

Your AEG DPS5650AM cooker hood features intuitive touch controls for easy operation.

Control Panel:

The hood is operated via a touch control panel, typically located on the front or side of the unit. This panel allows you to adjust fan speed and lighting.

Close-up of the LED saturation indicator on the cooker hood control panel
The LED saturation indicator signals when filters require cleaning or replacement.

Fan Operation:

  • Power On/Off: Press the power button to turn the hood on or off.
  • Speed Adjustment: Use the '+' and '-' buttons to select the desired fan speed. The hood offers multiple speed settings, including an intensive mode for rapid extraction.
  • Extendable Function: Gently pull the hood's front panel forward by 5 cm to activate the extended vapor shield, enhancing fume capture. Push it back to retract.
Cooker hood extended by 5cm for full headroom and improved extraction
The hood extends by 5 cm, providing full headroom and efficient fume extraction even at maximum power.
High-performance motor of the AEG cooker hood
The high-performance motor ensures fast and efficient removal of cooking odors and fumes.

Lighting:

  • LED Light Bar: Press the light button to turn the integrated LED light bar on or off. The LED lighting provides optimal and energy-efficient illumination of your cooking area.
Comparison of halogen and LED lighting for a hob
LED lighting provides optimal and energy-efficient illumination compared to traditional halogen.
Integrated light bar on the AEG cooker hood
The integrated light bar ensures seamless integration and effective illumination of the cooking area.

4. Maintenance and Cleaning

Regular maintenance ensures the longevity and optimal performance of your cooker hood.

Cleaning Metal Grease Filters:

The metal grease filters efficiently capture grease particles from cooking fumes. They should be cleaned regularly to maintain airflow and efficiency. The LED saturation indicator will signal when cleaning is required.

  • Removal: Carefully unlatch and remove the metal grease filters from the hood.
  • Cleaning: The filters can be easily cleaned in a dishwasher or by hand using hot water and a mild detergent. Ensure they are completely dry before re-installing.
  • Re-installation: Slide the clean, dry filters back into their slots until they click into place.
Hand pointing to a metal grease filter on the cooker hood
The metal grease filters are highly efficient at capturing grease and are easy to clean, even in a dishwasher.

Replacing Carbon Filters (for Recirculation Mode):

If your hood is operating in recirculation mode, the activated carbon filters (charcoal filters) absorb odors. These filters cannot be washed and must be replaced periodically, typically every 3-6 months depending on usage.

  • Refer to the specific instructions provided with your carbon filters for replacement procedures.

General Cleaning:

  • Wipe the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaning agent.
  • Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.

5. Troubleshooting

This section addresses common issues you might encounter with your AEG DPS5650AM cooker hood.

ProblemPossible CauseSolution
Hood not turning onNo power supply; loose connection.Check power cord connection and circuit breaker.
Poor extraction performanceClogged grease filters; saturated carbon filters (recirculation); improper ducting.Clean metal grease filters. Replace carbon filters. Check ducting for obstructions or leaks.
Excessive noise or vibrationLoose mounting; foreign object in fan; damaged fan motor.Ensure hood is securely mounted. Check for and remove any foreign objects. If noise persists, contact service.
LED light not workingFaulty LED module.Contact qualified service personnel for replacement.
Filters falling outImproperly installed filters; damaged filter latches.Ensure filters are correctly seated and latched. Inspect latches for damage.

If you encounter issues not listed here or if the problem persists after attempting the suggested solutions, please contact AEG customer support.

6. Technical Specifications

Detailed specifications for the AEG DPS5650AM Cooker Hood:

FeatureSpecification
Model NumberDPS5650AM (Reference: 942 022 603)
Dimensions (L x W x H)30 x 59.8 x 39.5 cm
Weight11.5 Kilograms
Control TypeTouch
Voltage220 Volts
Power130 Watts
Frequency59 Hz
Light Source TypeLED
Filter TypeCharcoal, Grease Filter
Ventilation TypeExtraction or Recirculation
Airflow Capacity600 cubic meters per hour
Noise Level59 dB
Energy Efficiency ClassA
Annual Energy Consumption49.7 kilowatthours per year
Mounting TypeWall Mount
ColorGrey
MaterialCarbon (referring to filter material)
Product data sheet for AEG DPS5650AM cooker hood
Official product data sheet with detailed technical specifications.

7. Warranty and Support

For information regarding warranty coverage, spare parts availability, or technical support, please refer to the documentation provided with your purchase or visit the official AEG website. You may also contact your retailer for assistance.

Important Information:

  • Recycling Information: For details on recycling light bulbs, please refer to local recycling guidelines.
  • Cleaning Information: For more information on cleaning light bulbs, consult relevant cleaning guides.

© 2025 AEG. All rights reserved.