DL-pro 00650499
Contents
DL-pro 1995PH7 Ribbed V-Belt for Dryer User Manual
Model: 00650499 | Brand: DL-pro
Product Overview
This manual provides essential information for the DL-pro 1995PH7 ribbed V-belt, designed as a replacement part for various dryer models. This V-belt features fine PH-type ribs and is compatible with original part numbers such as Bosch 650499 and 00650499.

Figure 1: The DL-pro 1995PH7 ribbed V-belt, a replacement part for dryer drums.
Specifications
| Feature | Detail |
|---|---|
| Length | 1995 mm |
| Rib Type | PH (Fine Ribs) |
| Height | Approx. 2.5 mm |
| Rib Spacing | Approx. 1.6 mm |
| Number of Ribs | 7 |
| Compatible Original Part Numbers | Bosch, Balay, Constructa, Siemens, Neff: 00650499 |
| Common Markings | Hutchinson B/S/H 9000431719 7PH 1995, 1995 PH 7, 1995PH7, 1995H7, 7PH1995, 7H1995 |
Compatibility
This ribbed V-belt is designed to be compatible with a wide range of dryer models from various manufacturers. Below are lists of compatible models and series. Please verify your appliance's model number against these lists or consult your appliance's service manual.

Figure 2: Partial list of compatible Bosch, Siemens, Gaggenau, Neff, Pitsos, Profilo, and Novamatic dryer models.

Figure 3: Partial list of compatible Constructa, Koenic, and Balay dryer models.
Key Compatible Brands and Series:
- Bosch: iQ500, iQ300, iQ700, iQ790, iSensoric, Extraklasse, Avantixx, Maxx, Logixx, Serie 4, Serie 6, Serie 8, HomeProfessional.
- Siemens: iQ500, iQ300, iQ700, iQ790, iSensoric, Extraklasse, SelfCleaning Condenser, Avantixx, Maxx, Logixx, Serie 4, Serie 6, Serie 8, HomeProfessional.
- Balay, Constructa, Gaggenau, Koenic, Neff, Novamatic, Pitsos, Profilo.
Installation (Setup)
Replacing a dryer's ribbed V-belt typically requires disassembling parts of the dryer. Due to the complexity and potential safety risks (electrical components, sharp edges), it is highly recommended that installation be performed by a qualified technician. If you choose to proceed yourself, ensure you follow all safety precautions and consult your specific dryer model's service manual.
General Steps (Consult Dryer Manual for Specifics):
- Safety First: Disconnect the dryer from the power supply before beginning any work. Turn off the circuit breaker.
- Access the Drum: Depending on your dryer model, this may involve removing the top panel, front panel, or rear panel.
- Locate the Old Belt: The belt wraps around the dryer drum and the motor pulley. Note its routing.
- Remove the Old Belt: Carefully remove the old belt from the drum and motor pulley.
- Install the New Belt: Route the new 1995PH7 belt around the drum and then around the motor pulley, ensuring it is properly seated and tensioned. The ribbed side of the belt typically faces the motor pulley.
- Reassemble: Reattach all panels and components in reverse order of disassembly.
- Test: Reconnect power and test the dryer to ensure the drum spins freely and quietly.
Operation
Once the DL-pro 1995PH7 ribbed V-belt is correctly installed, your dryer should operate as intended, with the drum rotating smoothly. The belt's function is to transmit power from the motor to the dryer drum, enabling the tumbling action necessary for drying clothes.
No special operational procedures are required for the belt itself; simply use your dryer according to its manufacturer's instructions.
Maintenance
The ribbed V-belt is a wear-and-tear component. While it does not require regular user maintenance, its lifespan can be affected by:
- Overloading the Dryer: Excessive load weight can put undue strain on the belt.
- Worn Pulleys or Rollers: Damaged or seized pulleys/rollers can cause friction and premature belt wear.
- Foreign Objects: Objects getting caught in the drum or around the belt can cause damage.
If you notice any unusual noises (squealing, thumping) or a decrease in drum rotation efficiency, it may indicate belt wear or other internal issues requiring inspection by a qualified technician.
Troubleshooting
If your dryer is experiencing issues after belt replacement or if you suspect the belt is failing, consider the following:
- Dryer Drum Not Spinning: This is the most common symptom of a broken or severely worn belt. Ensure the belt is properly installed and intact.
- Loud Squealing or Thumping Noises: This could indicate a worn belt, misaligned belt, or issues with the idler pulley or drum rollers.
- Burning Smell: A burning smell can occur if the belt is slipping or rubbing against other components due to misalignment or wear. Immediately disconnect power if you detect a burning smell.
For persistent issues, it is advisable to consult a professional appliance repair technician.
Warranty and Support
For information regarding the warranty of your DL-pro 1995PH7 ribbed V-belt, please refer to the purchase documentation or contact DL-pro customer support directly. DL-pro is committed to providing quality replacement parts.
As a leader in appliance spare parts distribution, DL-pro aims to offer the best solutions for appliance repair. For further assistance or inquiries, please visit the official DL-pro website or contact their customer service.

Figure 4: The DL-pro brand logo.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.