1. Introduction
The ClonerAlliance ViewPro is a standalone portable video recorder designed for capturing and playing back high-definition video. It features a 7-inch LCD screen, eliminating the need for an external display during operation. This device supports 1080p at 60 frames per second video recording and can accept 4K at 30 frames per second video input. It offers versatile input options including HDMI, AV, VGA, and YPbPr, allowing you to record from a wide range of sources such as game consoles, video players, DSLR cameras, drones, VHS, VCR, DVD players, and camcorders.
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ViewPro device to ensure optimal performance and user experience.
Image 1.1: ClonerAlliance ViewPro Portable Video Recorder
2. Package Contents
Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact ClonerAlliance customer support.
- ClonerAlliance ViewPro Device
- Remote Control
- Power Adapter
- HDMI Cable
- AV Cable
- VGA Cable
- YPbPr Cable
- USB Cable (for PC connection)
- Mini Tripod
- User Manual
Image 2.1: Included accessories with the ViewPro device
3. Product Overview
Familiarize yourself with the various components and ports of your ClonerAlliance ViewPro device.
3.1 Front Panel and Controls
The front panel features the 7-inch LCD screen and control buttons for navigation and operation.
- LCD Screen: 7-inch display for previewing and playing back video.
- Directional Pad (OK button): For menu navigation and selection.
- Source Button: Selects input source (HDMI, VGA, AV, YPbPr).
- Record/Stop Button: Initiates and terminates video recording.
- Playback Button: Enters playback mode for recorded files.
- Snapshot Button: Captures still images from the video feed.
- Home Button: Returns to the main menu.
- PC Button: Switches to PC connection mode.
- SD/USB Indicators: Lights indicating active storage.
3.2 Side and Rear Ports
The device is equipped with various ports for connecting power, storage, and video/audio sources.
- Storage Slot: SD card slot for recording.
- USB Port: For connecting USB flash drives or external hard drives.
- Line IN: 3.5mm audio input.
- Mic IN: 3.5mm microphone input for commentary.
- Line OUT: 3.5mm audio output.
- 12V Power Input: Connects to the included power adapter.
- To PC Port: USB connection to a computer for live streaming or data transfer.
- HDMI IN: Connects to HDMI video sources.
- HDMI OUT: HDMI pass-through output to an external display.
- VGA Audio IN: 3.5mm audio input for VGA sources.
- VGA IN: Connects to VGA video sources.
- MMI IN: Multi-Media Interface input for AV and YPbPr cables.
- LCD ON/OFF: Button to toggle the LCD screen.
Image 3.1: ViewPro device ports and connections
Image 3.2: Detailed port diagram
4. Setup
4.1 Installing the CR2025 Button Battery
A CR2025 button battery (not included) is recommended to maintain the system time and date settings, preventing resets due to power outages. Locate the battery compartment on the underside of the device.
Video 4.1: Instructions for installing the CR2025 button battery.
4.2 Power Connection
- Connect the included power adapter to the 12V Power Input port on the device.
- Plug the power adapter into a wall outlet.
Image 4.1: Power adapter for the ViewPro device
4.3 Storage Device Connection
The ViewPro supports recording to both SD cards and USB storage devices (flash drives or external hard drives). Ensure your storage device is formatted to FAT32 or exFAT for optimal compatibility.
- For SD Card: Insert the SD card into the SD card slot until it clicks into place.
- For USB Storage: Plug your USB flash drive or external hard drive into the USB port.
4.4 Connecting Video Sources
The ViewPro offers multiple input options. Choose the appropriate cable for your video source.
- HDMI Source: Connect an HDMI cable from your video source (e.g., game console, Blu-ray player) to the HDMI IN port on the ViewPro. If you wish to view the content on an external display simultaneously, connect another HDMI cable from the HDMI OUT port on the ViewPro to your TV or monitor.
- VGA Source: Connect a VGA cable from your video source to the VGA IN port. For audio, connect a 3.5mm audio cable from your source's audio output to the VGA Audio IN port.
- AV/YPbPr Source: Use the provided MMI cable. Connect the multi-colored RCA connectors (yellow for AV, red/green/blue for YPbPr video, red/white for stereo audio) to your source device, then connect the MMI cable's other end to the MMI IN port on the ViewPro.
Image 4.2: Connecting various video sources to the ViewPro
5. Operating Instructions
5.1 Powering On/Off
Press the ON/OFF button located on the device to power it on or off. The LCD screen will illuminate upon startup.
5.2 Selecting Video Source
After powering on, the device will display the current video input. You can switch between input sources (HDMI, VGA, YPbPr, AV) using the Source button on the device or the corresponding buttons on the remote control.
Video 5.1: Overview of ClonerAlliance ViewPro features, including source selection, recording, and playback.
5.3 Recording Video
- Ensure your video source is connected and displayed correctly on the ViewPro's LCD screen.
- Press the REC button on the device or remote control to start recording. A red 'Rec' indicator will appear on the screen.
- To stop recording, press the STOP button on the device or remote control. The device will save the recorded video file to your connected storage device.
Image 5.1: Recording video with the ViewPro
5.4 Playing Back Recorded Videos
- Press the PLAYBACK button on the device or remote control to enter playback mode.
- Navigate through your recorded video files using the directional buttons.
- Press OK to select and play a video.
Image 5.2: Playback of recorded videos on the ViewPro
5.5 Schedule Recording
The ViewPro allows you to schedule recording tasks.
- Press the SCHEDULE button on the remote control to access the schedule setting menu.
- Use the directional buttons to navigate and set the schedule function to 'On'.
- Configure the schedule mode (e.g., 'Every day') and set up to 5 individual recording tasks with specific start and end times.
5.6 Live Streaming and PC Connection
You can connect the ViewPro to a laptop or PC for live streaming or to manage recorded files.
- Connect the ViewPro to your computer using a USB cable via the To PC port.
- Install the bundled software (e.g., ClonerAlliance Helper) on your Windows system.
- Use the software to stream your video input to platforms like YouTube, Twitch, or Facebook with ultra-low latency.
Image 5.3: ViewPro connected to a PC for live streaming or data management
6. Maintenance
6.1 Cleaning the Device
To clean the ViewPro, use a soft, dry cloth. For the LCD screen, use a screen-specific cleaning solution and a microfiber cloth. Avoid using harsh chemicals or abrasive materials that could damage the device or screen.
6.2 Storage
Store the device in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is advisable to disconnect the power adapter and remove any connected storage devices.
6.3 Battery Care
If using an external battery pack (not included) for portable operation, ensure it is charged according to its manufacturer's instructions. For the internal CR2025 button battery, replace it when the system time and date frequently reset.
7. Troubleshooting
This section addresses common issues you might encounter with your ClonerAlliance ViewPro.
- No video displayed on screen:
• Ensure all cables (HDMI, AV, VGA, YPbPr) are securely connected to both the source and the ViewPro.
• Verify that the correct input source is selected on the ViewPro (HDMI, VGA, AV, YPbPr).
• Check if the video source device is powered on and outputting a signal. - Recording stops unexpectedly or device freezes:
• Ensure your storage device (SD card or USB drive) has sufficient free space.
• Check the format of your storage device. FAT32 or exFAT are recommended.
• If using an external hard drive, ensure it has adequate power.
• Avoid placing the device on soft surfaces that might block ventilation, as overheating can affect performance. - Cannot record content:
• The device does not support content protected by HDCP (High-bandwidth Digital Content Protection). If connected to an HDCP-protected source, it will display an error message or no signal. This is not a defect.
• Ensure your storage device is properly inserted and recognized by the ViewPro. - System time and date reset after power off:
• This indicates that the internal CR2025 button battery needs to be installed or replaced. Refer to Section 4.1 for installation instructions. - Cannot play back videos not recorded on the unit:
• The ViewPro is primarily designed to play back videos recorded by the unit itself. Compatibility with externally created video files may be limited. Ensure external files are in a compatible format (e.g., H.264/MP4) and resolution. - No audio during recording or playback:
• Check all audio cable connections. For HDMI, ensure the source is sending audio.
• Adjust the volume settings on the ViewPro and your source device.
• If using a microphone, ensure it is properly connected to the Mic IN port.
8. Specifications
| Feature | Specification |
| Brand | ClonerAlliance |
| Model Number | CA-997VP |
| Video Capture Resolution | 1080p |
| Input Video Support | Up to 4K@30fps |
| Display | 7-inch LCD |
| Hardware Interface | HDMI, AV Port, Composite Video, 3.5mm Audio, SDHC, USB 2.0 Type A, VGA |
| Number of USB 2.0 Ports | 2 |
| Operating System (for PC connection) | MAC OS (compatible with bundled software for Windows) |
| Recommended Use | Video Recording |
| Item Weight | 2.97 pounds |
| Product Dimensions (LxWxH) | 8.7 x 4.3 x 0.8 inches |
9. Warranty and Support
ClonerAlliance is committed to providing robust products and values customer feedback. For specific warranty information, please refer to the documentation included with your purchase or visit the official ClonerAlliance website. Our team provides professional and timely services to ensure your satisfaction.
You can register your product and access free bundled software by scanning the QR code on the bottom of your device or visiting the provided link: ClonerAlliance Product Registration & Software
For technical support or inquiries, please contact ClonerAlliance customer service.
Image 9.1: ClonerAlliance Customer Support
9.1 Compliance Information
The ClonerAlliance ViewPro complies with relevant European and UK conformity standards. You can verify certificates of conformity via the PTSI-Lab website: PTSI-Lab Certificate Inquiry
Image 9.2: CE Certificate of Conformity
Image 9.3: UKCA Attestation of Conformity
10. Important Safety Information
- Do not expose the device to water or excessive moisture.
- Avoid dropping or subjecting the device to severe impacts.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Use only the provided power adapter. Using an incompatible adapter may damage the device.
- Keep the device away from heat sources and direct sunlight.
- Ensure proper ventilation during operation to prevent overheating.
