Introduction
This manual provides comprehensive instructions for the installation, maintenance, and care of your Puig Batwing SML Touring Windshield, specifically designed for Indian Scout Bobber models from 2018 to 2022. Please read this manual thoroughly before beginning installation to ensure proper fitment and safe operation.
Safety Information
- Always wear appropriate personal protective equipment (PPE) during installation.
- Ensure the motorcycle is stable and secure on a level surface before beginning work.
- Do not overtighten fasteners, as this can damage components. Refer to torque specifications if provided in the product packaging.
- Regularly inspect the windshield and mounting hardware for signs of wear, damage, or looseness.
- If you are unsure about any step, consult a qualified motorcycle mechanic.
Package Contents
Upon opening the package, verify that all components are present and undamaged. The Puig Batwing SML Touring Windshield package includes:
- Puig Batwing SML Touring Windshield (two-piece: ABS semifairing and acrylic visor)
- All necessary mounting hardware (screws, brackets, washers, etc.)
- Installation instructions (refer to this manual for detailed steps)
If any parts are missing or damaged, please contact Puig customer support or your retailer immediately.
Installation Guide
Follow these steps carefully to install your Puig Batwing SML Touring Windshield. It is recommended to have a second person assist during certain steps to ensure stability and proper alignment.
Tools Required:
- Hex key set
- Wrench set
- Torque wrench (if specific torque values are provided with the product)
- Soft cloth
Installation Steps:
- Prepare the Motorcycle: Park the Indian Scout Bobber on a level surface and ensure it is stable, preferably on a motorcycle stand. Turn off the engine and remove the key.
- Identify Components: Unpack all components and identify the ABS semifairing, the acrylic visor, and all mounting brackets and fasteners.
- Attach Mounting Brackets: Secure the specific mounting brackets (provided) to the motorcycle's front fork or headlight assembly as per the included diagram. Ensure these are finger-tight initially.
- Assemble Windshield Sections: Carefully attach the 3mm acrylic visor to the 4mm ABS semifairing. This typically involves small screws or clips that secure the two pieces together. Ensure the fit is snug and aligned.
- Mount the Batwing Assembly: Lift the assembled Batwing windshield and align its mounting points with the brackets previously installed on the motorcycle. Secure the windshield to the brackets using the provided fasteners.
- Adjust and Tighten: Once the windshield is loosely mounted, adjust its position for optimal alignment and clearance. Ensure it does not interfere with handlebars, controls, or other motorcycle components during full steering lock. Once satisfied with the position, progressively tighten all fasteners. If torque specifications are provided, use a torque wrench to tighten to the specified values.
- Final Inspection: Double-check all fasteners to ensure they are securely tightened. Gently shake the windshield to confirm it is firmly mounted and does not wobble.
Figure 1: Side view of the Puig Batwing SML Touring Windshield installed on an Indian Scout Bobber.
Figure 2: Front view of the Puig Batwing SML Touring Windshield on an Indian Scout Bobber, showcasing its design.
Usage and Care
The Puig Batwing SML Touring Windshield is designed to enhance rider comfort by deflecting wind and debris. While in use, ensure the windshield is clean for optimal visibility.
Cleaning Instructions:
- Use only mild soap and water with a soft, non-abrasive cloth to clean the windshield.
- Avoid using harsh chemicals, ammonia-based cleaners, or abrasive materials, as these can scratch or damage the acrylic and ABS surfaces.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
Maintenance
Regular maintenance ensures the longevity and safety of your Puig Batwing SML Touring Windshield.
- Fastener Check: Periodically (e.g., every 1,000 miles or monthly) check all mounting bolts and screws for tightness. Vibrations from riding can cause fasteners to loosen over time.
- Visual Inspection: Inspect the acrylic visor and ABS semifairing for cracks, deep scratches, or other damage. Significant damage may compromise structural integrity and require replacement.
- Bracket Integrity: Examine the mounting brackets for any signs of bending, corrosion, or fatigue.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Windshield wobbles or vibrates excessively. | Loose mounting hardware. | Check and tighten all mounting bolts and screws. Ensure they are torqued correctly if specifications are available. |
| Difficulty aligning windshield during installation. | Brackets not correctly positioned or tightened prematurely. | Loosen all fasteners, re-position brackets and windshield, then progressively tighten. Ensure the motorcycle is on a level surface. |
| Windshield scratches easily. | Improper cleaning methods or abrasive materials used. | Always use mild soap, water, and a soft cloth. Avoid harsh chemicals or dry wiping. |
| Missing components upon unboxing. | Packaging error or transit damage. | Contact Puig customer support or your retailer with proof of purchase and a list of missing items. |
Specifications
| Model | BATWING SML TOURING INDIAN SCOUT BOBBER 18-22 |
| Item Model Number | 21074W |
| Brand | Puig |
| Material | Acrylonitrile Butadiene Styrene (ABS) for semifairing, Acrylic for visor |
| Item Thickness | 4 Millimeters (ABS), 3 Millimeters (Acrylic Visor) |
| Color | Transparent (visor), Black (semifairing) |
| Item Weight | 2.95 pounds |
| Product Dimensions | 6.3 x 18.9 x 14.96 inches |
| Vehicle Service Type | Motorcycle (Indian Scout Bobber 2018-2022) |
Warranty and Support
For specific warranty information regarding your Puig Batwing SML Touring Windshield, please refer to the documentation included with your purchase or visit the official Puig website. For technical support, missing parts, or installation assistance, please contact Puig customer service directly or the retailer from whom you purchased the product.
Puig Official Website: www.puig.tv
