1. Introduction
Thank you for choosing the Korona 60002 Electric Fan Heater. This powerful 2-in-1 device features ceramic heating technology and a robust fan, making it ideal for quickly heating large spaces such as garages, workshops, construction sites, or offices. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your fan heater.
2. Important Safety Instructions
Please read all safety warnings and instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the heater is placed on a stable, level surface.
- Do not cover the heater or obstruct its air inlets/outlets. Overheating protection is built-in, but proper ventilation is crucial.
- Keep flammable materials (furniture, curtains, paper, clothing, etc.) at least 1 meter (3 feet) away from the front, sides, and rear of the heater.
- Do not use the heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- Unplug the heater when not in use.
- The protective grid prevents accidental contact with ceramic heating elements. Do not attempt to remove or bypass it.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Overview
The Korona 60002 is designed for robust performance and portability. It features a durable heat-resistant metal casing and an adjustable tilt angle for flexible positioning.
Figure 3.1: Front view of the Korona 60002 Electric Fan Heater, highlighting its compact design and protective grille.
Figure 3.2: Top view of the control panel, featuring the 3-level fan/power selector and stepless temperature control knob.
Figure 3.3: Side view illustrating the adjustable tilt angle, allowing for flexible air direction for both heating and ventilation modes.
Figure 3.4: The integrated carrying handle provides a safe and secure grip for easy portability.
4. Setup
- Unpacking: Carefully remove the fan heater from its packaging. Retain packaging for future storage or transport.
- Placement: Place the heater on a firm, level, heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from any walls, furniture, or other objects.
- Power Connection: Ensure the voltage of your power outlet matches the specifications of the heater (120 Volts). Plug the power cord into a grounded electrical outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for the heater's power consumption (3000W).
- Adjust Angle: Adjust the tilt angle of the heater using the side knobs to direct the airflow as desired.
5. Operating Instructions
The Korona 60002 features simple and intuitive rotary controls.
- Power On/Mode Selection: Locate the left rotary knob (marked with fan and heat symbols).
- Turn the knob to '0' for Off.
- Turn to the fan symbol for Fan Only mode (no heat).
- Turn to the first heat symbol for Low Heat (e.g., 1500W).
- Turn to the second heat symbol for High Heat (e.g., 3000W).
- Temperature Adjustment: Use the right rotary knob (marked 'MIN' to 'MAX') to set the desired temperature. This is a stepless thermostat control.
- Turn towards 'MAX' for higher heat output and continuous heating.
- Turn towards 'MIN' for lower heat output. The heater will cycle on and off to maintain the set temperature.
- Power Off: To turn off the heater, rotate the left knob back to the '0' position. Allow the fan to run for a few moments after turning off the heat function to cool down the elements before completely unplugging.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Korona fan heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Do not immerse the heater in water.
- Grille Cleaning: Use a vacuum cleaner with a brush attachment to remove dust and lint from the air inlet and outlet grilles.
- Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
7. Troubleshooting
If you experience issues with your Korona 60002 fan heater, please consult the following table before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; Power switch is off; Overheat protection activated. | Check if the plug is securely in the outlet. Ensure the power switch is in an 'On' position. Unplug the heater, wait 10-15 minutes for it to cool down, then plug it back in. |
| Heater produces no heat. | Only fan mode selected; Temperature setting too low; Overheat protection activated. | Ensure a heat mode (Low or High) is selected. Turn the temperature knob towards 'MAX'. Allow the heater to cool down if it was recently overheated. |
| Reduced airflow. | Air inlets/outlets are blocked or dusty. | Unplug the heater and clean the grilles with a vacuum cleaner. Ensure no objects are obstructing airflow. |
| Unusual noise or smell. | New unit smell (temporary); Internal component issue. | A slight odor is normal for new heaters and will dissipate. If noise or smell persists or is strong, unplug immediately and contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Korona |
| Model Number | 60002 |
| Color | Red - Black |
| Dimensions (L x W x H) | 8 x 17 x 32 cm (3.15 x 6.7 x 12.6 inches) |
| Weight | 1.1 kg (2.4 lbs) |
| Voltage | 120 Volts |
| Power Output | Up to 3000 Watts |
| Number of Speeds | 2 (Heat levels) + Fan Only |
| Special Feature | Overheat Protection |
| Heating Method | Convection (Ceramic) |
| Power Source | Corded Electric |
| Cable Length | 1.7 meters (approx. 5.6 feet) |
| Recommended Use | Garage, Workshop, Office, Construction Site, Patio (Indoor use only) |
9. Warranty and Support
Information regarding specific warranty terms is not provided in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly using the contact information provided with your purchase or on the official Korona website.
Please have your model number (60002) and purchase date available when contacting support.