Introduction
This manual provides detailed instructions for the U`King 7x3W 4-in-1 RGBW LED Par Light. Please read this manual thoroughly before operating the device to ensure proper use, optimal performance, and safety.
The U`King LED Par Light is designed for various entertainment venues, including parties, weddings, festivals, theaters, churches, banquets, DJ shows, stages, bars, nightclubs, and KTVs. It features multiple control modes and vibrant color mixing capabilities to create dynamic lighting effects.
Figure 1: U`King 7x3W RGBW LED Par Lights (4-pack) with remote controls.
Package Contents
Upon opening the package, please verify that all listed items are present and in good condition:
- 1 x Stage Light (per unit purchased)
- 1 x Remote Control (per unit purchased)
- 2 x Mounting Brackets (per unit purchased)
- 2 x Screws (for bracket attachment, per unit purchased)
- 1 x User Manual
Key Features
- 4-in-1 RGBW LED Source: Equipped with 7 pieces of 3W powerful LEDs, offering Red, Green, Blue, and White colors for infinite color mixing.
- Multiple Control Modes: Supports Remote Control, Automatic, Sound Activated, Master-Slave, and DMX control modes for versatile operation.
- High Brightness & Low Consumption: Designed for ultra-high brightness with stable performance and lower power consumption.
- Easy Operation: User-friendly interface and remote control allow for simple mode adjustments. Can be controlled by a single remote or a DMX console.
- Flexible Installation: Comes with adjustable brackets and screws, enabling installation on T-trusses, stage bars, or placement directly on the ground.
- Long Lifespan: LEDs have an estimated lifespan of 50,000 hours.
Product Overview
Familiarize yourself with the components and connections of the U`King LED Par Light.
Figure 2: Rear Panel Connections and Controls.
- DMX OUT: DMX signal output port.
- DMX IN: DMX signal input port.
- POWER: Power input connection.
- DIGITAL DISPLAY: Shows current mode and settings.
- ENTER: Confirms selection.
- DOWN: Navigates down or decreases value.
- UP: Navigates up or increases value.
- MENU: Accesses main menu or changes modes.
Setup
- Unpacking: Carefully remove the light fixture and all accessories from the packaging. Inspect for any damage during transit.
- Mounting:
- Attach the included mounting brackets to the sides of the light fixture using the provided screws.
- The brackets allow for flexible positioning. You can hang the light from a truss, mount it on a wall, or place it on the floor. Ensure the mounting surface or structure can safely support the weight of the fixture.
- Power Connection: Connect the power cable to the "POWER" input on the rear panel of the light. Plug the other end into a suitable power outlet (AC 100-240V, 50/60Hz).
- Initial Power On: Once connected, the light will power on and the digital display will illuminate.
Operating Modes
The U`King LED Par Light offers five primary control modes:
1. Automatic Mode
In Automatic mode, the light cycles through pre-programmed light shows without external input. This is ideal for quick setup and continuous operation.
- Press the "MENU" button on the rear panel until "Auto" or a similar indicator appears on the digital display.
- Use the "UP" and "DOWN" buttons to select different automatic programs if available.
- Press "ENTER" to confirm the selection.
2. Sound Activated Mode
The light will react to sound and music, changing patterns and colors in sync with the audio input.
- Press the "MENU" button until "Sound" or "Snd" appears on the digital display.
- The light will now respond to ambient sound detected by its built-in microphone.
- Adjust the microphone sensitivity if needed (refer to advanced settings in the menu).
3. DMX Control Mode
For professional control, connect the light to a DMX controller. The light uses 8 DMX channels.
- Connect a DMX cable from the DMX OUT of your controller to the DMX IN of the first light.
- For multiple lights, daisy-chain them by connecting the DMX OUT of the first light to the DMX IN of the second, and so on.
- Press the "MENU" button until "dXXX" (where XXX is the DMX address) appears on the digital display.
- Use the "UP" and "DOWN" buttons to set the desired DMX starting address for the fixture. Each fixture in a DMX chain must have a unique starting address.
- Press "ENTER" to confirm the DMX address.
- Refer to your DMX controller's manual and the light's DMX channel chart (usually provided in a separate DMX protocol sheet or advanced section of the manual) for specific channel functions (e.g., dimmer, red, green, blue, white, strobe, mode).
4. Master-Slave Mode
In Master-Slave mode, one light acts as the "Master" and controls other "Slave" lights, synchronizing their effects.
- Connect the DMX OUT of the designated Master light to the DMX IN of the first Slave light. Continue daisy-chaining all Slave lights.
- Set the Master light to either Automatic or Sound Activated mode.
- Set all Slave lights to "Slave" mode (usually indicated by "SLAV" or similar on the display). Refer to the light's menu for this setting.
- The Slave lights will now mimic the Master light's behavior.
5. Remote Control Mode
The included remote control provides convenient wireless operation for various functions.
Figure 3: Remote Control Functions.
- Power Button (Red): Turns the light ON/OFF.
- LED Button: Activates/deactivates the LEDs.
- Voice Recognition (Music Note Icon): Activates Sound Activated mode.
- R, G, B Buttons: Activates Red, Green, or Blue static colors.
- W, Y, P Buttons: Activates White, Yellow, or Purple static colors.
- COLOR +/-: Adjusts color brightness (intensity).
- SPEED +/-: Adjusts speed of dynamic effects (Jump, Strobe, Fade).
- All the light (Three Bars Icon): Activates all colors simultaneously.
- JUMP: Activates Jump Change effect.
- STROBE: Activates Strobe effect.
- FADE: Activates Fade effect.
- DMX ON/OFF: Toggles DMX control mode.
- DMX +/-: Adjusts DMX address.
- IP +/-: Adjusts IP address (if applicable for network control, typically not used for basic DMX).
Specifications
| Feature | Specification |
|---|---|
| Light Source | 7 x 3W RGBW LEDs (4-in-1) |
| DMX Channels | 8 CH |
| Lifespan | 50,000 hours |
| Control Modes | Auto, DMX, Sound Activated, Master-Slave, Remote Control |
| Light Effects | Fade, Jump Change, Gradual Change, Static Colors (brightness and speed adjustable) |
| Power Source | Corded Electric |
| Color | Black |
| Material | Polyimide |
| Model Number | ZQ-B270 |
Maintenance
Regular maintenance ensures the longevity and optimal performance of your U`King LED Par Light.
- Cleaning: Periodically clean the lens and exterior casing with a soft, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure the ventilation openings are clear of dust and debris to prevent overheating.
- Storage: When not in use for extended periods, store the light in a dry, dust-free environment, preferably in its original packaging or a protective case.
- Cable Inspection: Regularly inspect power and DMX cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
Troubleshooting
If you encounter issues with your U`King LED Par Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not power on. | No power supply; faulty cable; power outlet issue. | Check power cable connection. Try a different power outlet. Ensure the power switch (if any) is ON. |
| No light output. | Light is in standby; LED button off; DMX signal issue. | Press the "LED" button on the remote. Check the mode setting on the digital display. If in DMX mode, ensure a valid DMX signal is present and the DMX address is correct. |
| Remote control not working. | Battery depleted; remote not aimed at sensor; interference. | Replace the remote control battery. Ensure direct line of sight to the light's IR sensor. Reduce potential interference. |
| Light not responding to DMX. | Incorrect DMX address; faulty DMX cable; DMX termination missing. | Verify the DMX address matches your controller's setting. Check DMX cable connections. Ensure a DMX terminator is used on the last fixture in a chain for stable signal. |
| Sound Activated mode not working. | No sound input; microphone sensitivity too low. | Ensure there is sufficient sound near the light. Adjust microphone sensitivity via the menu settings. |
Warranty and Support
U`King provides customer support and warranty coverage for this product:
- Money Back Guarantee: This LED stage light is covered with a 30-Days Money Back Guarantee from the date of purchase.
- Warranty: A 90-Days warranty is provided from the date of purchase.
- Customer Service: For any questions or issues regarding your stage light, please feel free to contact U`King customer service via their after-sale email. They aim to reply within 24 hours and assist in resolving any problems.
