HOOBRO Console Table BF1801XG01G2 Instruction Manual

Introduction

Thank you for choosing the HOOBRO Console Table BF1801XG01G2. This extra-long console table is designed to provide functional surface space and convenient charging capabilities with its integrated power outlets and USB ports. This manual provides essential information for safe assembly, operation, and maintenance of your new console table.

Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Do not exceed the maximum weight recommendation of 20 kg (approximately 44 lbs) for the tabletop.
• Ensure proper assembly and use of adjustable feet to maintain stability.
• Keep children away from the assembly area. Small parts can be a choking hazard.
• Do not use power tools for assembly unless specifically instructed, as this may overtighten fasteners and damage the product.
• Place the table on a flat, stable surface.
• Do not expose the power strip to moisture or liquids.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Tabletop Panel (Engineered Wood)
• Metal Frame Components
• Built-in Power Strip (2 AC Outlets, 2 USB Ports) with 59-inch Power Cord
• Adjustable Feet
• Accessory Kit (Screws, Allen Wrench)
• Assembly Instructions

Image: Key components of the console table, highlighting the industrial style panels, sturdy metal frame, integrated electric socket, and adjustable feet.

Setup and Assembly Instructions

Assembly is designed to be straightforward and can typically be completed by one person. An Allen wrench is included; a Phillips head screwdriver may be required for attaching the electrical component.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Check against the package contents list.
2. Assemble Metal Frame: Connect the metal frame components using the provided screws and Allen wrench. Do not fully tighten screws until all parts are aligned.
3. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the metal frame legs. These can be adjusted later to ensure stability on uneven floors.
4. Position Tabletop: Place the tabletop panel onto the assembled metal frame. The tabletop panel can be rotated to position the built-in power strip on either side or in the middle, according to your preference.
5. Secure Tabletop: Fasten the tabletop to the metal frame using the remaining screws. Once all screws are in place, fully tighten all fasteners on the frame and tabletop.
6. Connect Power Strip: Ensure the power strip is securely seated in its cutout. If necessary, use a Phillips head screwdriver to secure it.

Image: The assembled HOOBRO console table in a typical home setting, showcasing its design and functionality.

Image: Dimensional diagram of the console table, indicating its length, width, height, and power cord length for planning placement.

Operating Instructions

The console table features an integrated power strip for convenient charging.

• Power Connection: Plug the 59-inch power cord from the console table into a standard wall outlet.
• AC Outlets: Use the two built-in 120V/12A AC outlets to power lamps, laptops, or other electronic devices.
• USB Ports: Use the two built-in 5V/2A USB ports to charge mobile phones, tablets, and other USB-powered devices.
• Power Strip Orientation: The tabletop panel can be rotated during assembly to position the power strip on the left, right, or center of the table, depending on your needs.

Image: Close-up of the console table's integrated power strip, detailing the two AC outlets and two USB charging ports.

Image: The console table in use as a charging station, with a smartphone and tablet connected to the USB ports and a lamp plugged into an AC outlet.

Maintenance

Proper care will extend the life and appearance of your console table.

• Cleaning: Wipe the surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
• Fasteners: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Power Strip: Keep the power outlets and USB ports free from dust and debris. Do not attempt to disassemble the power strip.

Troubleshooting

If you encounter issues with your console table, refer to the following common solutions:

• Table is Unstable: Adjust the leveling feet at the bottom of the legs to compensate for uneven floors. Ensure all assembly screws are fully tightened.
• Power Outlets/USB Ports Not Working:
  • Check if the main power cord is securely plugged into a functional wall outlet.
  • Test the wall outlet with another device to confirm it has power.
  • Ensure the power strip itself is properly seated and connected within the tabletop.
  • Avoid overloading the power strip with too many high-power devices.
• Scratches on Floor: Ensure the adjustable feet are properly installed and adjusted. Consider placing felt pads under the feet for additional floor protection.

Specifications

Image: Comparison illustrating the robust 1.2-inch thick tabletop of the HOOBRO console table, designed for durability and a higher weight capacity compared to thinner alternatives.

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact HOOBRO customer service through the retailer where the product was purchased. Keep your purchase receipt for warranty claims.