Product Instruction Manual

Introduction

The Klipsch Reference Premiere RP-600M II bookshelf speakers are engineered to deliver exceptional audio performance in any space. This second-generation speaker series incorporates advanced technology for the cleanest and most dynamic sound reproduction. These speakers are designed to integrate seamlessly into various audio setups, providing a rich and detailed listening experience.

Figure 1: Klipsch Reference Premiere RP-600M II Bookshelf Speakers (without grilles)

Key Features

• Bigger Tractrix Horn: Features a new, larger 90° x 90° silicone composite hybrid Tractrix horn for crisper, clearer sound. This design efficiently transfers high-frequency waves into the listening area, ensuring smooth frequency response.
• Linear Travel Suspension (LTS) Titanium Diaphragm Tweeter: An exclusive 1-inch LTS tweeter minimizes distortion, providing enhanced and detailed audio performance. LTS tweeters are a signature component of the Reference Premiere series, known for their natural sound reproduction.
• Vented Tweeter Design: The tweeter housing is vented to reduce standing waves that can create unwanted harmonics, resulting in improved detail and clarity in high-frequency sound.
• All-New Cerametallic Woofers: Updated copper-spun 6.5-inch Cerametallic woofers deliver flawless sound reproduction with minimum distortion and maximum efficiency, a hallmark of the Reference Premiere series.
• Tractrix Ports: Utilizing Tractrix geometry, the ports allow for the most efficient and fastest air transfer from the cabinet, which reduces port noise and contributes to cleaner, more powerful bass.
• Bi-Wiring/Bi-Amping Capability: Dual input terminals enable bi-wiring or bi-amping. This separates high and low-frequency current into different speaker cables, which can reduce distortion and provide clearer midrange.
• New Look and Materials: Constructed with furniture-grade MDF and vinyl finishes, these speakers offer a sophisticated aesthetic. The ebony vinyl finish boasts satin-painted baffles and a scratch-resistant surface.
• Removable Grille: The grilles attach magnetically, allowing for an easy transition between a powerful visual statement and a more discreet appearance.

Figure 2: Klipsch Reference Premiere RP-600M II Bookshelf Speakers (with grilles)

Setup

Speaker Placement

For optimal sound performance, place the RP-600M II bookshelf speakers on sturdy stands or a stable surface at ear level when seated. Ensure there is adequate space around the speakers, especially behind them, to allow the rear-firing Tractrix port to function effectively. Experiment with the distance from walls and corners to achieve the best bass response and soundstage in your listening environment.

Connecting Your Speakers

The RP-600M II speakers feature dual input terminals, allowing for standard wiring, bi-wiring, or bi-amping configurations. For standard wiring, ensure the metal jumpers connecting the upper and lower terminals are in place. Connect your amplifier's speaker cables to either the upper or lower set of terminals, observing correct polarity (positive to positive, negative to negative).

• Standard Wiring: Use a single pair of speaker cables from your amplifier to one set of terminals (e.g., the lower set), ensuring the metal jumpers are connected.
• Bi-Wiring: Remove the metal jumpers. Use two separate pairs of speaker cables from your amplifier to the speaker, one pair for the high-frequency terminals and one for the low-frequency terminals.
• Bi-Amping: Remove the metal jumpers. Use two separate amplifiers (or a multi-channel amplifier) to power the high and low-frequency sections independently.

Figure 3: Rear Panel with Input Terminals and Tractrix Port

Operation

Once properly connected to your audio receiver or amplifier, the Klipsch RP-600M II speakers are ready for use. Ensure your amplifier is powered on and the correct input source is selected. Adjust the volume level on your amplifier to your desired listening level. These speakers are designed to reproduce a wide range of frequencies with clarity and power, suitable for music, movies, and gaming.

• Volume Control: Control the overall volume through your connected amplifier or receiver.
• Source Selection: Select your audio source (e.g., CD player, turntable, streaming device) via your amplifier.
• Grille Use: The magnetic grilles can be easily attached or removed based on your aesthetic preference. Removing the grilles may offer a slightly more open sound, while keeping them on protects the drivers.

Maintenance

To ensure the longevity and optimal performance of your Klipsch RP-600M II speakers, follow these simple maintenance guidelines:

• Cleaning the Cabinet: The speaker cabinets are made of MDF with a durable vinyl finish. Use a soft, dry cloth to gently wipe down the surfaces. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish.
• Cleaning the Woofers and Tweeters: If the grilles are removed, gently dust the Cerametallic woofers and titanium tweeters with a soft, lint-free cloth or a soft brush. Do not apply pressure or touch the delicate driver cones directly.
• Grille Care: The magnetic grilles can be cleaned by gently vacuuming them with a soft brush attachment to remove dust. If necessary, they can be wiped with a slightly damp cloth, but ensure they are completely dry before reattaching.
• Environmental Conditions: Avoid exposing the speakers to direct sunlight, extreme temperatures, or high humidity, as these conditions can affect the cabinet materials and internal components.

Troubleshooting

If you experience issues with your Klipsch RP-600M II speakers, consult the following common troubleshooting steps:

Specifications

Figure 4: Klipsch RP-600M II Speaker Dimensions

Warranty Information

The Klipsch Reference Premiere RP-600M II speakers come with a limited warranty. For specific details regarding the warranty period, coverage, and terms and conditions, please refer to the warranty card included with your product or visit the official Klipsch website. Retain your proof of purchase for warranty claims.

Support

For further assistance, technical support, or to access additional resources such as FAQs and updated manuals, please visit the official Klipsch support website:

www.klipsch.com/support

You may also contact Klipsch customer service directly through the contact information provided on their website.