JOUGE Portable Herb Spice Grinder Cone Rolling Machine Instruction Manual

1. Introduction

Thank you for choosing the JOUGE Portable Herb Spice Grinder Cone Rolling Machine. This all-in-one device is designed to simplify the process of grinding herbs and filling pre-rolled cones efficiently. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Package Contents:

• 1x Herb Grinder with Loader Filler
• 12x Pre-Roll Cones
• 1x Cleaning Brush

Image 1.1: The JOUGE Portable Herb Grinder and Cone Filler shown with its components, including the main unit, pre-roll cones, and a cleaning brush.

2. Safety Information

• Keep out of reach of children.
• Use only for its intended purpose as an herb grinder and cone filler.
• Do not attempt to grind hard or metallic objects.
• Avoid disassembling the unit beyond the intended cleaning steps.
• This product is not dishwasher safe. Clean manually as instructed.

3. Setup and Assembly

The JOUGE Portable Herb Grinder and Cone Rolling Machine is designed for easy assembly and use. Follow these steps to prepare your device:

3.1 Component Identification

Familiarize yourself with the main parts of the device:

Image 3.1: An exploded diagram illustrating the various parts of the JOUGE grinder, including the grinding teeth, funnel, cone filler, and storage compartment.

3.2 Preparing the Cone Loader

1. Unscrew the top grinding section from the main body.
2. Ensure the cone storage compartment is empty and clean.
3. The device includes a leveler for cones. If cone tops are not level with the loader surface, use the included leveler.

Image 3.2: The magnetic lid of the JOUGE grinder is shown open, revealing the sharp grinding teeth and the internal structure for cone loading.

4. Operating Instructions

4.1 Grinding Herbs

1. Remove the top lid of the grinder.
2. Place your desired herbs into the grinding chamber.
3. Replace the lid and twist it back and forth to grind the herbs. The transparent design allows you to monitor the grinding process.

Video 4.1: Demonstrates the process of loading herbs into the grinder and twisting the lid to achieve the desired grind.

4.2 Filling Pre-Roll Cones

The device can fill multiple cones simultaneously. It supports pre-rolled cones from 84mm to 109mm.

1. Open the bottom cap of the cone loader.
2. Insert up to six pre-roll cones into the designated slots. Ensure the cones are seated properly.
3. If the cone tops are not level with the loader surface, use the included leveler to adjust them.
4. Place the ground herbs into the top grinding chamber.
5. Twist the top grinder section. The ground herbs will fall directly into the cones below.
6. Use the included brush to gently push down the herbs into the cones for a firm pack.
7. Once filled, rotate the bottom cap to the left to push the filled cones upwards for easy removal.

Video 4.2: Shows how to load empty cones, grind herbs, and fill the cones using the device, including the use of the brush and the cone ejection mechanism.

Video 4.3: A detailed demonstration of the cone filling process, from loading cones to grinding and packing, and finally removing the filled cones.

Video 4.4: A short preview video showing the quick and easy process of filling cones.

Image 4.1: A pre-roll cone being inserted into the cone loader for filling.

Image 4.2: A visual step-by-step guide demonstrating the usage of the JOUGE device for grinding and filling cones.

5. Maintenance and Cleaning

• The device is washable and reusable.
• To clean, disassemble the grinding and cone filling sections.
• Use the included brush to remove any residual herbs.
• Wash components with warm water and mild soap. Rinse thoroughly.
• Important: This product is not dishwasher safe. Hand wash only.
• Ensure all parts are completely dry before reassembling and storing.

6. Troubleshooting

• Herbs not grinding properly: Ensure the grinding teeth are clean and free of residue. Do not overfill the grinding chamber.
• Cones not filling evenly: Make sure the cones are properly seated in the slots. Use the included leveler if necessary. Ensure herbs are finely ground.
• Difficulty twisting grinder: Clean the grinding mechanism to remove any sticky residue.

7. Specifications

Image 7.1: The JOUGE grinder with its key dimensions highlighted for reference.

8. Warranty and Support

This JOUGE product comes with a 12-month warranty. If you encounter any issues or are not satisfied with your purchase, please contact our customer support for assistance. We offer a no-reason return or exchange policy within the warranty period.

For support, please refer to the contact information provided with your purchase or visit the official JOUGE website.