Klipsch Reference Premiere RP-8000F II Floorstanding Speaker Instruction Manual

1. Overview

The Klipsch RP-8000F II floorstanding speaker is engineered to deliver exceptional cinematic sound. It features a larger Tractrix® horn, updated 8-inch copper-spun Cerametallic woofers, a vented tweeter design, and Tractrix ports. This second-generation Reference Premiere speaker series incorporates advanced technology for clear, dynamic audio reproduction, complemented by refined aesthetics.

Figure 1: Front view of the Klipsch RP-8000F II Floorstanding Speaker.

2. Key Features

• Bigger Tractrix Horn: A new, larger 90° x 90° silicone composite hybrid Tractrix horn provides crisper, clearer sound.
• Linear Travel Suspension (LTS) Titanium Diaphragm Tweeter: The exclusive 1-inch LTS minimizes distortion for enhanced, detailed performance.
• Vented Tweeter Design: The vented tweeter housing enhances the detail in audio output.
• All-New Cerametallic Woofers: Updated for flawless sound reproduction, minimum distortion, and maximum efficiency.
• Tractrix Ports: Utilizing Tractrix geometry, these ports allow for efficient, fast air transfer from the cabinet for cleaner, more powerful bass.
• Bi-Wiring/Bi-Amping Capability: Dual input terminals allow for bi-wiring/bi-amping, separating high and low-frequency currents for reduced distortion and clearer midrange.
• Advanced Cabinet Design: Additional bracing and a divided cabinet minimize vibrations. Improved input panel and furniture-grade materials contribute to its aesthetic and performance.
• Removable Grille: Attaches magnetically for an elegant transition from exposed drivers to a discreet appearance.

Figure 2: Detail of the Tractrix horn and tweeter.

3. Setup

3.1 Unpacking

Carefully remove the speaker from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.

3.2 Placement

Position the floorstanding speakers in your listening area. For optimal stereo imaging, place them equidistant from your primary listening position and spaced appropriately apart. Experiment with toe-in (angling the speakers slightly inward) to fine-tune the soundstage.

Figure 3: Example living room setup with Klipsch floorstanding speakers.

3.3 Connections

Connect the speaker to your amplifier or receiver using high-quality speaker wire. Ensure correct polarity (positive to positive, negative to negative) for each speaker. The RP-8000F II supports bi-wiring or bi-amping for enhanced audio performance. Refer to your amplifier's manual for specific instructions on these advanced connection methods.

Figure 4: Rear view of the speaker with connection terminals.

Video 1: Official Klipsch Reference Premiere setup and feature overview. This video demonstrates the speaker's design and connection options.

4. Operating Instructions

4.1 Powering On

Ensure all connections are secure before powering on your amplifier/receiver and audio source. Gradually increase the volume to a comfortable listening level.

4.2 Audio Source Selection

Select your desired audio source (e.g., TV, music player, gaming console) through your connected amplifier/receiver. The RP-8000F II is compatible with various devices for home theater and music listening.

4.3 Dolby Atmos Experience

If utilizing the integrated up-firing speakers for Dolby Atmos, ensure your receiver is Dolby Atmos compatible and configured correctly. The up-firing drivers reflect sound off the ceiling to create an immersive, overhead sound experience.

Video 2: Klipsch New Reference Series video, showcasing the speakers in various home theater and music listening scenarios.

5. Maintenance

5.1 Cleaning

Wipe the speaker cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish. The magnetic grilles can be removed for cleaning or to expose the drivers.

5.2 Grille Care

The magnetic grilles protect the drivers. If removed, store them safely to prevent damage. Reattach by aligning them with the speaker front; magnets will secure them in place.

6. Troubleshooting

6.1 No Sound

• Check all speaker wire connections for proper seating and polarity.
• Verify your amplifier/receiver is powered on and the correct input source is selected.
• Ensure volume is not muted or set too low.

6.2 Distorted Sound

• Reduce the volume level on your amplifier/receiver.
• Check speaker wire connections for any frayed strands that might be touching.
• Ensure the amplifier/receiver is not overdriven or underpowered for the speakers.

6.3 Uneven Sound

• Verify speaker placement is symmetrical relative to the listening position.
• Check individual speaker connections for proper polarity.
• Adjust balance settings on your amplifier/receiver.

7. Specifications

Figure 5: Detailed specifications for the Klipsch RP-8000F II.

8. Warranty and Support

8.1 Limited Warranty

This product is covered by a limited warranty. Please refer to the warranty card included with your purchase or visit the official Klipsch website for detailed terms and conditions.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact Klipsch customer support through their official website or the contact information provided in your product documentation.