Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Maxlite RRA6109CSW 6-Inch LED Retrofit Downlight. Please read these instructions thoroughly before installation and retain them for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.
Safety Information
WARNING: Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Disconnect power at the fuse or circuit breaker before installation or servicing.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- This device is not intended for use with emergency exits.
- Suitable for wet locations.
- Minimum operating temperature: -4°F (-20°C). Maximum operating temperature: 104°F (40°C).
- Ensure the existing recessed housing is properly grounded.
Product Features
The Maxlite RRA6109CSW LED Retrofit Downlight is designed for easy upgrades to existing recessed lighting fixtures, offering enhanced performance and versatility.
- Compatibility: Fits 5-inch and 6-inch recessed housings.
- Color Temperature Selectable (CCT): Choose from 2700K (Warm White), 3000K (Soft White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight) via a switch on the fixture.
- Dimmable: Compatible with 120V Triac dimming systems, dimmable down to 10%.
- High Efficacy LED: Integrated LED array with an optical diffuser for even illumination.
- High Color Rendering Index (CRI): CRI ≥90 for accurate color representation.
- Toolless Installation: Designed for simple installation with an E26 screw-base adapter.
- Durable Construction: Stamped steel housing and plastic lens.
- Wet Location Rated: Suitable for use in damp or wet environments.
Image: Maxlite RRA6109CSW Retrofit Downlight showing its components and key features such as CCT selectable, adjustable up to 30 degrees, 95-degree beam angle, high CRI, and toolless installation.
Package Contents
Verify that all components are present before beginning installation:
- Integrated LED Downlight Unit (referred to as 'Bulb' in some documentation)
- Remote Control (Functionality may vary or require specific setup not detailed for this model.)
Specifications
| Specification | Value (RRA6109CSW) |
|---|---|
| Power Consumption | 10W |
| Lumens Delivered | 900 lm |
| Efficacy | 90 lm/W |
| Equivalency | 75W INC |
| CRI | ≥90 |
| Color Temperature (K) | 2700K, 3000K, 3500K, 4000K, 5000K |
| L70 Lumen Maintenance | ≥50,000 hours |
| Power Factor | ≥0.9 |
| Input Voltage | 120V |
| Operating Temperature | -4°F to 104°F (-20°C to 40°C) |
| Housing Material | Stamped Aluminum |
| Lens Material | Plastic |
| Mounting | Retrofits into 5" and 6" housings |
| Listings | Energy Star, JA8, T20, cETLus, RoHS, FCC |
| Environment | Wet locations, Indoor Only |
| Warranty | 5 Years |
Image: Detailed specifications table for the Maxlite RRA6109CSW model.
Product Dimensions
Image: Dimensional drawing of the Maxlite RRA6109CSW downlight, showing a diameter of 7.20 inches, a visible trim diameter of 3.30 inches, and a height of 2.90 inches with a base width of 5.03 inches.
- Overall Diameter: 7.20 inches
- Visible Trim Diameter: 3.30 inches
- Height: 2.90 inches
- Base Width: 5.03 inches
Installation Instructions
Before You Begin: Ensure power is OFF at the circuit breaker or fuse box. This fixture is designed for installation into existing 5-inch or 6-inch recessed housings.
- Turn Off Power: Locate the circuit breaker controlling the light fixture and switch it to the OFF position. Verify power is off using a voltage tester.
- Remove Existing Fixture: Carefully remove the existing bulb and trim from the recessed housing.
- Select Color Temperature (CCT): Before installation, locate the CCT selectable switch on the side of the downlight fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch to the corresponding setting.
- Connect E26 Adapter: Screw the provided E26 screw-base adapter into the existing socket of the recessed housing.
- Connect Downlight: Plug the connector from the downlight into the connector on the E26 adapter. Ensure a secure connection.
- Install Downlight: Gently push the downlight into the recessed housing until the spring clips engage and hold the fixture flush with the ceiling. Ensure no wires are pinched.
- Restore Power: Turn the power back ON at the circuit breaker.
- Test Operation: Turn on the light switch to confirm proper operation.
Operating Instructions
- Power On/Off: Control the downlight using your standard wall switch.
- Color Temperature Selection: The CCT switch on the fixture allows you to select between 2700K, 3000K, 3500K, 4000K, and 5000K. This setting should be chosen prior to final installation.
- Dimming: This downlight is compatible with most 120V Triac (forward-phase) dimmers. For best performance, use a dimmer specifically designed for LED lighting. Refer to your dimmer's instructions for proper operation.
Maintenance
The Maxlite RRA6109CSW LED Retrofit Downlight requires minimal maintenance.
- Cleaning: Ensure power is OFF before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
- No User-Serviceable Parts: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty switch or dimmer | Check circuit breaker/fuse. Ensure all connections are secure (power OFF first). Test with a known working switch or bypass the switch temporarily (power OFF first). |
| Light flickers or dims improperly | Incompatible dimmer Loose wiring Voltage fluctuations | Ensure dimmer is LED-compatible (Triac/forward-phase). Check wiring connections (power OFF first). Consult an electrician if voltage issues are suspected. |
| Incorrect color temperature | CCT switch set incorrectly | Remove fixture and adjust the CCT switch to the desired setting (power OFF first). |
If troubleshooting steps do not resolve the issue, contact customer support.
Warranty and Support
This Maxlite RRA6109CSW LED Retrofit Downlight is covered by a 5-year limited warranty from the date of purchase, covering defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or further inquiries, please contact Maxlite customer support. Keep your purchase receipt as proof of purchase.
Maxlite Contact Information: Refer to the official Maxlite website or your product packaging for the most current contact details.