Oversteel KOVAR Wireless RGB Mechanical Gaming Keyboard User Manual

1. Introduction

Thank you for choosing the Oversteel KOVAR Wireless RGB Mechanical Gaming Keyboard. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard to ensure optimal performance. The KOVAR keyboard offers versatile connectivity options, vibrant RGB backlighting, and durable Outemu Red mechanical switches for an enhanced gaming and typing experience.

Image 1.1: Top-down view of the Oversteel KOVAR Wireless RGB Mechanical Gaming Keyboard, showcasing its full layout and colorful RGB backlighting.

2. Package Contents

Please verify that all items are present in your package:

• Oversteel KOVAR Wireless RGB Mechanical Gaming Keyboard
• USB-A to USB-C Cable (for wired connection and charging)
• 2.4 GHz Wireless USB Dongle
• User Manual (this document)

3. Setup

3.1 Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB-A to USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a USB wall adapter. The charging indicator (usually near the USB port or a specific key) will show the charging status.

3.2 Connectivity Modes

The KOVAR keyboard supports three connectivity modes: Wired (USB), 2.4 GHz Wireless, and Bluetooth. A selector switch located on the underside of the keyboard allows you to choose between these modes. Ensure the switch is set to the desired mode before connecting.

• Wired Connection (USB): Set the selector switch to the middle position (USB icon). Connect the USB-A to USB-C cable from the keyboard to your computer. The keyboard will be recognized automatically.
• 2.4 GHz Wireless Connection: Set the selector switch to the right position (2.4G icon). Insert the 2.4 GHz wireless USB dongle into an available USB port on your computer. The keyboard should connect automatically. If not, press and hold the Fn + 2.4G key (often marked on the 'G4' key) for a few seconds to initiate pairing.
• Bluetooth Connection: Set the selector switch to the left position (Bluetooth icon). The keyboard supports up to three Bluetooth devices. To pair, press and hold Fn + G1 (for Bluetooth 1), Fn + G2 (for Bluetooth 2), or Fn + G3 (for Bluetooth 3) until the corresponding indicator light flashes rapidly. On your device (PC, Mac, Android), search for Bluetooth devices and select "Oversteel KOVAR" to pair.

4. Operating Instructions

4.1 Basic Key Functions

The KOVAR keyboard features a full 108-key layout, including a numeric keypad. All standard keys function as expected. The keyboard also incorporates Anti-Ghosting and Full Key Rollover technology, ensuring that every keystroke is registered accurately, even during rapid, simultaneous presses.

4.2 Multimedia and Function Keys

Utilize the Fn key in combination with the F-keys (F1-F12) and other designated keys for multimedia control and special functions. Specific combinations may vary slightly based on the operating system.

• Fn + F1-F12: Typically control multimedia functions such as volume, play/pause, track skip, and opening applications. Refer to the keycap legends for specific functions.
• Fn + Win: Locks/unlocks the Windows key to prevent accidental presses during gaming.
• Fn + Esc: Resets keyboard settings to default (may require holding for several seconds).

5. RGB Lighting Control

The KOVAR keyboard features customizable RGB backlighting. You can adjust lighting effects directly from the keyboard or through the dedicated software.

Image 5.1: Angled view of the Oversteel KOVAR keyboard, highlighting the vibrant RGB backlighting on the keys and side.

5.1 On-Keyboard Lighting Adjustments

Use the following key combinations to control the RGB lighting:

• Fn + Ins: Cycle through different lighting effects/modes.
• Fn + Home: Adjust lighting color (for static or single-color modes).
• Fn + PgUp: Increase brightness.
• Fn + PgDn: Decrease brightness.
• Fn + Arrow Keys: Adjust lighting direction or speed for certain effects.

6. Software and Drivers

For advanced customization, including macro programming, key remapping, and detailed RGB lighting configuration, download and install the official Oversteel KOVAR software. A QR code leading to the download page is typically included in the product packaging. Alternatively, visit the official Oversteel website and navigate to the support section for the KOVAR keyboard.

Note: Ensure you download the correct software version for your operating system. Follow the on-screen instructions for installation. The software may require the keyboard to be connected via USB for initial setup and firmware updates.

7. Maintenance

7.1 Cleaning

To clean your keyboard, disconnect it from your computer. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid spraying liquids directly onto the keyboard. For cleaning between keycaps, use compressed air or a small brush. Do not immerse the keyboard in water or use harsh chemicals.

7.2 Battery Care

To prolong battery life, avoid fully discharging the keyboard frequently. Charge the keyboard when the low battery indicator appears. If storing the keyboard for an extended period, charge it to approximately 50% before storage and recharge every few months.

8. Troubleshooting

If you encounter issues with your Oversteel KOVAR keyboard, please refer to the following common solutions:

• Keyboard not responding:
  • Ensure the keyboard is charged.
  • Check the connectivity mode selector switch on the underside of the keyboard is set correctly (USB, 2.4G, or Bluetooth).
  • For 2.4 GHz wireless, ensure the USB dongle is securely plugged in and try a different USB port. Re-pair if necessary (Fn + 2.4G).
  • For Bluetooth, ensure Bluetooth is enabled on your device and the keyboard is paired to the correct channel (G1, G2, or G3). Re-pair if necessary (Fn + G1/G2/G3).
  • Try connecting via USB cable to rule out wireless issues.
• RGB lighting not working or incorrect:
  • Check brightness settings (Fn + PgUp/PgDn).
  • Cycle through lighting modes (Fn + Ins).
  • Ensure the keyboard software is not overriding settings. Close and restart the software if applicable.
• Keys not registering or ghosting:
  • This keyboard features Anti-Ghosting and Full Key Rollover. If issues persist, try updating the keyboard firmware via the Oversteel software.
  • Clean the keyboard to remove any debris that might be obstructing key switches.
• Poor wireless connection or lag:
  • Ensure the keyboard is within range of the receiver (2.4 GHz dongle or Bluetooth device).
  • Minimize interference from other wireless devices.
  • Ensure the keyboard battery is sufficiently charged.

9. Specifications

10. Warranty and Support

The Oversteel KOVAR keyboard comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Oversteel website. If you require technical assistance or have questions not covered in this manual, please contact Oversteel customer support through their official channels.