SOLIOM S600 4G LTE Solar Powered Cellular Security Camera User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SOLIOM S600 4G LTE Solar Powered Cellular Security Camera. The S600 is designed for outdoor surveillance in locations without Wi-Fi access, utilizing 4G LTE cellular networks for connectivity and a solar panel for continuous power.

Key Features:

• 4G LTE Cellular Connectivity (No Wi-Fi Required)
• Solar Powered with 9000mAh Rechargeable Battery
• Pan (320°) and Tilt (90°) Functionality with 3X Digital Zoom
• 1080p HD Video Resolution
• PIR Motion Sensor with Instant Alerts
• Color Night Vision with Motion-Activated Spotlight
• Two-Way Audio Communication
• Local Storage (up to 128GB MicroSD, 32GB included) and Cloud Storage Options
• IP65 Weatherproof Rating

2. What's in the Box

Please verify that all components are present before proceeding with installation:

• SOLIOM S600 4G LTE Camera
• Solar Panel
• 4G SIM Card (US Eiotclub)
• USB Cable
• User Guide
• Mounting Bracket
• Fitting Bag (Screws and Wall Plugs)
• 1/4-Inch Collet

3. Setup Guide

3.1. SIM Card and Memory Card Installation

The camera requires a Nano-SIM card (4FF) for 4G LTE connectivity and a MicroSD card for local video storage. A 32GB MicroSD card and a 4G SIM card are included.

1. Locate the SIM card and MicroSD card slots on the camera body. These are typically protected by a rubber cover.
2. Carefully open the protective cover.
3. Insert the Nano-SIM card into the SIM card slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. Insert the MicroSD card into the memory card slot with the gold contacts facing down. Push until it clicks into place.
5. Ensure the protective cover is securely closed to maintain the camera's weatherproof rating.

Image: SIM and MicroSD card insertion points.

3.2. Charging the Battery

Before initial use, fully charge the camera's built-in 9000mAh battery using the provided USB cable and a standard 5V/2A USB power adapter (not included). The solar panel will maintain the charge once installed.

3.3. App Download and Initial Configuration

1. Download the Soliom+ App from your smartphone's app store (iOS or Android).
2. Register for a new account or log in if you already have one.
3. Follow the in-app instructions to add your S600 camera. This typically involves scanning a QR code on the camera.
4. Ensure your camera is powered on and within an area with good 4G LTE signal for successful connection.

3.4. Mounting the Camera

Select a mounting location that provides optimal solar exposure for the solar panel and a clear view for surveillance. The camera is IP65 weatherproof, suitable for outdoor use.

1. Attach the mounting bracket to the desired surface (wall, pole, etc.) using the provided screws and wall plugs. Ensure the surface is sturdy enough to support the camera.
2. Secure the camera to the mounting bracket.
3. Adjust the angle of the solar panel to maximize direct sunlight exposure throughout the day.
4. Adjust the camera's viewing angle as needed.

Image: SOLIOM S600 camera with solar panel.

4. Operating Instructions

4.1. Live View and Pan/Tilt Control

Access the live video feed through the Soliom+ App. From the live view interface, you can control the camera's pan and tilt functions.

• Open the Soliom+ App and select your S600 camera.
• Tap on the live view to access controls.
• Use the on-screen joystick or directional arrows to pan the camera horizontally (320°) and tilt it vertically (90°).
• Pinch to zoom for 3X digital zoom.

Image: App interface showing pan and tilt controls.

4.2. Motion Detection and Alerts

The S600 uses a PIR motion sensor combined with software pixel analysis to detect human movement and reduce false alarms.

• In the Soliom+ App settings for your camera, navigate to the motion detection section.
• Adjust sensitivity levels as required.
• Enable push notifications to receive instant alerts on your smartphone when motion is detected.
• Recorded motion events are saved to the MicroSD card and/or cloud storage.

Image: Instant motion detection alerts on smartphone.

4.3. Night Vision

The camera features 1080p color night vision, enhanced by a motion-activated spotlight for clear visibility up to 32ft in low-light conditions.

• Night vision mode activates automatically in low light.
• The integrated spotlight illuminates the area upon motion detection, providing full-color video recordings at night.

Image: 1080p Full HD and Color Night Vision.

4.4. Two-Way Audio

The built-in speaker and microphone allow for two-way communication through the camera.

• From the live view in the Soliom+ App, tap the microphone icon to speak through the camera.
• Tap the speaker icon to listen to audio from the camera's location.

4.5. Data Plan Management

The camera operates on a 4G LTE cellular network, requiring a data plan. The included SIM card offers a free trial. Data plans can be managed through the Soliom+ App.

• Access the data plan section within the Soliom+ App.
• Review available plans and renew your subscription as needed. Unlimited data plans are available.
• The camera is compatible with T-Mobile, AT&T, and Verizon networks in the US.

Image: Unlimited Data for all Cellular Plans.

5. Maintenance

5.1. Solar Panel Cleaning

To ensure optimal charging efficiency, periodically clean the surface of the solar panel. Dust, dirt, and debris can reduce its effectiveness.

• Use a soft, damp cloth to gently wipe the solar panel surface.
• Avoid abrasive cleaners or harsh chemicals.

5.2. Battery Care

The camera's built-in 9000mAh battery is designed for long-term use with solar charging. In prolonged periods of low sunlight, the battery level may decrease.

• Monitor the battery level through the Soliom+ App.
• If the battery level becomes critically low, you may need to temporarily remove the camera and charge it via the USB port.

5.3. Firmware Updates

Periodically check the Soliom+ App for available firmware updates. Updates can improve performance, add new features, and enhance security.

• Follow the in-app prompts to download and install any available firmware updates.
• Ensure the camera has sufficient battery charge before starting an update.

6. Troubleshooting

If you encounter issues with your SOLIOM S600 camera, refer to the following common troubleshooting steps:

• Camera Not Connecting to 4G:
  • Ensure the SIM card is correctly inserted and activated with a valid data plan.
  • Check for 4G LTE signal strength in the camera's location via the app.
  • Verify that the SIM card is compatible with US networks (T-Mobile, AT&T, Verizon).
  • Restart the camera by powering it off and on.
• Battery Not Charging:
  • Ensure the solar panel is clean and receiving direct sunlight.
  • Check the connection between the solar panel and the camera.
  • If solar charging is insufficient, charge the camera directly via USB.
• False Motion Alerts:
  • Adjust the PIR motion sensor sensitivity in the Soliom+ App.
  • Ensure the camera is not pointed at areas with constant movement (e.g., busy roads, swaying trees in strong wind).
• No Night Vision:
  • Ensure the camera's light sensor is not obstructed.
  • Verify that night vision settings are enabled in the app.
• App Issues:
  • Ensure the Soliom+ App is updated to the latest version.
  • Clear the app's cache or reinstall the app.
  • Check your smartphone's internet connection.

7. Specifications

8. Warranty and Support

SOLIOM products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official SOLIOM website.

If you require technical assistance or have questions not covered in this manual, please contact SOLIOM customer support through the following channels:

• Soliom+ App: Access support options directly within the application.
• Official Website: Visit www.soliom.com for FAQs, support resources, and contact information.