Teltonika RUTX14000000

Teltonika RUTX14 LTE Dual-SIM Industrial Cellular Router User Manual

Model: RUTX14000000

1. Introduction

The Teltonika RUTX14 is a high-performance LTE Cat 12 industrial cellular router designed for robust and reliable connectivity in demanding environments. It features dual SIM capabilities, multiple Ethernet ports, Wi-Fi, Bluetooth LE, and USB interfaces, making it suitable for a wide range of industrial and business applications. This manual provides essential information for the proper installation, configuration, and maintenance of your RUTX14 router.

Teltonika RUTX14 Industrial Cellular Router

Figure 1: Teltonika RUTX14 Industrial Cellular Router (Top View)

2. Package Contents

Before proceeding with the installation, please verify that your package contains all the following items:

Teltonika RUTX14 Package Contents

Figure 2: All items included in the Teltonika RUTX14 package.

3. Product Overview

3.1 Front Panel

The front panel of the RUTX14 router provides access to SIM card slots, Ethernet ports, and power connections.

Teltonika RUTX14 Front Panel

Figure 3: Front panel view of the RUTX14, showing SIM slots, Ethernet ports, and power connector.

3.2 Side Panel

The side panel features various antenna connectors and a USB port for external devices.

Teltonika RUTX14 Side Panel

Figure 4: Side panel view of the RUTX14, illustrating antenna connectors and the USB port.

4. Setup

4.1 SIM Card Installation

  1. Locate the SIM card slots on the front panel of the router.
  2. Using the provided SIM adapter kit if necessary, insert your Mini SIM (2FF) cards into the SIM1 and/or SIM2 slots. Ensure the SIM cards are inserted correctly with the gold contacts facing down.
  3. Push the SIM card until it clicks into place.

4.2 Antenna Connection

Connect the appropriate antennas to their respective connectors on the side panel of the router:

Ensure all antennas are securely tightened but do not overtighten.

4.3 Power Connection

  1. Connect the 24 W Power Supply Unit (PSU) to the PWR connector on the front panel of the router.
  2. Plug the PSU into a suitable power outlet.
  3. The router will power on automatically. Observe the LED indicators for boot-up status.

4.4 Initial Access

To access the router's Web User Interface (WebUI) for configuration:

  1. Connect your computer to one of the router's LAN ports using an Ethernet cable.
  2. Open a web browser and navigate to the default IP address: 192.168.1.1
  3. When prompted, enter the default login credentials:
    Username: admin
    Password: admin01
  4. You will be prompted to change the default password upon first login for security purposes.

5. Operating Instructions

5.1 Web User Interface (WebUI)

The WebUI is the primary interface for configuring and monitoring your RUTX14 router. From here, you can manage network settings, cellular connections, Wi-Fi, VPNs, firewall rules, and more. Refer to the comprehensive Teltonika Wiki for detailed instructions on specific configurations.

5.2 Connectivity

6. Maintenance

7. Troubleshooting

This section addresses common issues you might encounter with your RUTX14 router.

ProblemPossible CauseSolution
No power / Router not turning onPower cable not connected; Faulty PSU; Power outlet issue.Check power cable connection; Try a different power outlet; Verify PSU functionality.
No cellular signal / Internet connectionSIM card not inserted correctly; Antennas not connected; No active data plan; Poor signal area.Reinsert SIM card(s); Ensure antennas are securely connected; Contact your mobile operator; Relocate the router for better signal.
Cannot access WebUI (192.168.1.1)Incorrect IP address; Network cable issue; Computer IP settings.Verify IP address; Check Ethernet cable; Ensure your computer is set to obtain IP address automatically (DHCP).
Slow internet speedPoor cellular signal; Network congestion; Outdated firmware.Check signal strength in WebUI; Try a different SIM card/operator; Update router firmware.
Wi-Fi not visible or connectingWi-Fi disabled; Incorrect password; Antennas not connected.Enable Wi-Fi in WebUI; Verify Wi-Fi password; Ensure Wi-Fi antennas are connected.

If you encounter issues not listed here, please consult the official Teltonika Networks Wiki or contact technical support.

8. Specifications

FeatureSpecification
Mobile Module4G (LTE) Cat 12 up to 600 Mbps, 3G up to 42 Mbps
SIM2 x Mini SIM (2FF) slots, 1.8 V/3 V
Ethernet5 x RJ45 ports, 10/100/1000 Mbps (1 x WAN, 4 x LAN)
Wi-FiIEEE 802.11ac/n/g/b/a, Dual-Band, up to 150 simultaneous connections
BluetoothBluetooth LE
CPUQuad-core ARM Cortex A7, 717 MHz
RAM256 MB, DDR3
FLASH Storage256 MB, SPI Flash
I/Os1 x Digital Input, 1 x Digital Output on 4 pin power connector
USB1 x USB A port
Power Input9-50 VDC, 4 pin DC connector
Dimensions (W x H x D)5.19" x 1.73" x 3.74" (132 x 44 x 95 mm)
Weight1.13 lb (0.51 kg)
Operating SystemRouterOS (Teltonika Networks custom OS)
Special FeatureWPS

9. Warranty and Support

The Teltonika RUTX14 router comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation provided with your product or visit the official Teltonika Networks website. For technical support, firmware downloads, and extensive knowledge base articles, please visit the Teltonika Networks Wiki or contact their customer support team directly.

Online Resources: