Yaheetech 3-Drawer Nightstand Side Table Instruction Manual

Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Ensure all parts are present and undamaged before beginning assembly.
• Do not overtighten screws, as this may damage the material.
• Do not overload the table or drawers. The maximum load capacity for the tabletop is 48 kg, and for each drawer is 6 kg.
• Do not stand on the table.
• Keep small parts away from children during assembly to prevent choking hazards.
• Assemble on a soft, clean surface to prevent scratches.

Parts List

Verify that all components are included in your package. If any parts are missing or damaged, please contact customer support.

• Main Panels (Top, Bottom, Sides, Back)
• Drawer Panels (Front, Back, Sides, Bottom)
• Drawer Slides (Left and Right)
• Hardware (Screws, Dowels, Cam Locks, Knobs)
• Legs

Figure 1: All components included in the package, ready for assembly.

Assembly Instructions

Follow these steps carefully to assemble your Yaheetech 3-Drawer Nightstand. Refer to the included hardware and panel labels (e.g., A, B, C, D, E, F, G for hardware; 1-12 for panels) for identification.

Step 1: Prepare Drawer Panels

1. Insert cam lock screws (A) into the designated holes on the drawer front panels (Part 8).
2. Attach the side panels (Parts 9, 10) to the drawer front panel (Part 8) using dowels (D) and cam locks (C). Ensure the grooves for the drawer bottom are facing inwards and aligned.
3. Slide the drawer bottom panel (Part 12) into the grooves of the assembled drawer sides.
4. Attach the drawer back panel (Part 11) to complete the drawer box, securing it with dowels (D) and cam locks (C).
5. Insert the knob screw (F) from the inside of the drawer front panel (Part 8) and attach the metal knob (E) from the outside. Tighten securely.
6. Attach the drawer slides (H-2(R) and H-2(L)) to the outer sides of each assembled drawer using screws (G). Ensure the roller is at the front of the drawer.
7. Repeat these steps for all three drawers.

Figure 2: Assembled drawers with knobs and slides attached, demonstrating storage capacity.

Step 2: Assemble the Main Frame

1. Insert cam lock screws (A) into the designated holes on the top panel (Part 1) and bottom panel (Part 5).
2. Attach the main frame slides (H-1(L) and H-1(R)) to the inner sides of the side panels (Parts 2, 3) using screws (G). Ensure the roller is at the front of the nightstand.
3. Insert dowels (D) into the top of the legs (Parts 4, 6).
4. Attach the side panels (Parts 2, 3) to the bottom panel (Part 5) by aligning the dowels and cam lock screws. Secure with cam locks (C).
5. Slide the back panel (Part 7) into the designated grooves on the main frame.
6. Attach the top panel (Part 1) to the assembled frame, aligning the dowels and cam lock screws. Secure with cam locks (C).

Figure 3: Main frame assembly with overall dimensions.

Step 3: Insert Drawers

Carefully slide each assembled drawer into the main frame, aligning the drawer slides on the drawer with the slides on the frame. Push firmly until the drawer is fully seated. Test each drawer for smooth operation.

Figure 4: Fully assembled nightstand ready for use.

Operating Instructions

The Yaheetech 3-Drawer Nightstand is designed for convenient storage and display in various settings.

• Drawers: The three drawers provide ample enclosed storage for personal items, books, chargers, and other essentials. Pull the metal knobs gently to open and push to close.
• Top Surface: Use the top surface to place lamps, alarm clocks, decorative items, or beverages. Ensure items are placed stably.

Figure 5: Nightstand in a living room setup, demonstrating versatile use.

Maintenance and Care

Proper care will ensure the longevity and appearance of your nightstand.

• Cleaning: The surface is designed to be scratch and water-resistant. For daily cleaning, simply wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Spills: Wipe up spills immediately to prevent moisture damage, especially on unsealed edges or inside drawers.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.
• Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
• Hardware: Periodically check all screws and fittings to ensure they remain tight. Retighten if necessary.

Troubleshooting

If you encounter any issues with your nightstand, refer to the following common solutions:

• Wobbly Table: Check all leg and frame connections. Ensure all screws and cam locks are securely tightened. Adjust if necessary.
• Sticking Drawers:
  1. Ensure the drawer slides are properly aligned and free of obstructions.
  2. Verify that the drawer slides are securely attached to both the drawer and the main frame.
  3. Check if the drawer is overloaded. Remove some items to see if it improves.
• Damaged Surface: For minor scratches, touch-up pens or furniture repair kits may be used. For significant damage, contact customer support.

Specifications

Figure 6: Detailed dimensions of the nightstand.

Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official Yaheetech website. Keep your proof of purchase for any warranty claims.