1. Product Overview
The Universal 3.2-Quart Stainless Steel Thermal Airpot is designed to keep beverages at their optimal temperature for extended periods. Featuring double-wall vacuum insulation, it maintains hot temperatures for over 12 hours and cold temperatures for up to 24 hours. Its generous 3-liter (3.2-quart) capacity makes it suitable for various settings, from home use to large events. The airpot includes a convenient pump-action dispensing system, a sturdy carrying handle, and a leakproof locking lid for secure transport.
Figure 1: Universal 3.2-Quart Thermal Airpot. This image displays the stainless steel body and black pump-action lid with a carrying handle.
2. Setup and Initial Use
2.1 Unpacking and Initial Cleaning
- Carefully remove the thermal airpot from its packaging.
- Before first use, wash all parts that come into contact with beverages.
- To clean, open the lid by pressing the buttons on both sides and lifting. Remove the pump mechanism (straw and gasket) by gently pulling it out.
- Wash the interior of the airpot and all removable parts with warm, soapy water. Use the provided cleaning brush for thorough cleaning of the interior and pump components.
- Rinse thoroughly with clean water and allow all parts to air dry completely before reassembly.
2.2 Assembly
- Reinsert the pump mechanism into the lid, ensuring the silicone gasket is properly seated.
- Close the lid firmly, ensuring a tight seal.
3. Operating Instructions
3.1 Filling the Airpot
- Open the lid by pressing the side buttons.
- Pour your desired hot or cold beverage into the wide mouth opening. Do not overfill; leave some space at the top.
- Close the lid firmly, ensuring a tight seal.
3.2 Dispensing Beverages
- Ensure the lid is in the "OPEN" position (indicated by the dial on top).
- Place a cup or mug directly under the spout.
- Press down on the pump button located on top of the lid to dispense the beverage. Release to stop pouring.
Figure 2: User dispensing a beverage by pressing the pump button. This image shows a hand pressing the pump to pour liquid into a mug.
Figure 3: Close-up view of the pump mechanism. This image highlights the ease of pressing the pump for dispensing.
3.3 Locking Mechanism and Carrying
- To prevent accidental dispensing during transport, rotate the dial on the lid to the "CLOSE" position. This locks the pump button.
- Use the sturdy carrying handle for easy and secure transportation of the airpot.
Figure 4: User carrying the thermal airpot by its handle. This image demonstrates the portability of the airpot.
3.4 Swivel Base
The airpot features a swivel base, allowing for convenient 360-degree rotation. This enables easy self-service from any angle without needing to lift or reposition the entire unit.
4. Maintenance and Cleaning
- Hand Wash Only: The thermal airpot is not dishwasher safe. Hand wash all components.
- Disassembly: For thorough cleaning, disassemble the lid and pump mechanism as described in Section 2.1. The tubing of the pump is removable for easy cleaning.
- Cleaning Brush: Utilize the provided cleaning brush to reach all internal surfaces of the airpot and the pump components.
- Drying: Ensure all parts are completely dry before reassembling and storing to prevent odors or mildew.
Figure 5: Lid open, revealing the double-wall design for temperature retention. This image shows the interior of the airpot and the lid's components.
5. Troubleshooting
- Beverage not dispensing: Ensure the lid is in the "OPEN" position. Check if the pump mechanism is correctly assembled and not clogged.
- Loss of temperature retention: Verify that the lid is securely closed and the silicone gasket is properly seated. Ensure the airpot is not left open for extended periods.
- Leaks: Check that the lid is tightly closed and the locking mechanism is engaged if transporting. Inspect the silicone gasket for any damage or misalignment.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Universal |
| Capacity | 3.2 Quarts (3 Liters) |
| Color | Silver |
| Material | Stainless Steel (18/8) |
| Insulation Type | Double-Wall Vacuum Insulation |
| Temperature Retention (Hot) | 12+ Hours |
| Temperature Retention (Cold) | 24+ Hours |
| Dispensing Mechanism | Pump-Action |
| Special Features | Swivel Base, Leakproof Locking Lid, Carrying Handle |
| Product Dimensions | 5 x 5 x 11 inches |
| Item Weight | 3.76 pounds |
| Care Instructions | Hand Wash Only |
7. Safety Information
- Always keep the airpot upright, especially when filled with hot liquids, to prevent spills.
- Do not tilt or move the airpot excessively when full, even with the lid locked, as minor leaks may occur.
- Keep out of reach of children when filled with hot beverages.
- Do not use for carbonated beverages, as pressure buildup can cause the lid to eject forcefully.
- Avoid using abrasive cleaners or scrubbers that could damage the stainless steel finish.
8. Warranty and Support
For warranty information or product support, please contact Universal customer service directly. Refer to the product packaging or the manufacturer's official website for contact details.
