1. Introduction
Thank you for choosing the ARGO Polyfemo Slim Evaporative Cooler. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your appliance. Please read this manual thoroughly before use and keep it for future reference.
1.1. Safety Information
- Always ensure the appliance is placed on a stable, level surface.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Unplug the appliance from the power outlet before cleaning, filling, or performing any maintenance.
- Keep out of reach of children and pets.
- Do not block the air inlets or outlets.
- Use only clean tap water in the water tank.
- Do not operate the appliance if the cord or plug is damaged, or if the appliance malfunctions or has been damaged in any way.
2. Product Overview
The ARGO Polyfemo Slim is a high-performance evaporative cooler designed for efficient air cooling and circulation. Its patented Vortex System ensures a circular airflow, wide cooling area, and low noise levels.
2.1. Key Features
- Patented VORTEX System: Circular airflow for wide cooling and low noise.
- High Airflow Capacity: Up to 750 m³/h with an effective range of up to 10 meters.
- Slim Design: Only 17 cm deep for minimal space occupation.
- Multiple Ventilation Options: Natural, Normal, and Sleep modes.
- Three Fan Speeds: High, Medium, Low.
- Easy Maintenance: Removable dust filter and honeycomb design for cleaning.
- Convenient Water Tank: 4-liter capacity with patented opening system for easy removal and filling.
- Intuitive Control: Large Soft-Touch control panel and remote control.
2.2. Components
Figure 2.1: Front-left view of the ARGO Polyfemo Slim Evaporative Cooler, showcasing its sleek design and main air outlet.
Figure 2.2: Side view of the evaporative cooler, highlighting its slim profile.
Figure 2.3: Direct front view of the evaporative cooler, showing the large fan grille and water level indicator.
Figure 2.4: Exploded view illustrating the internal fan and removable front grille for maintenance.
Figure 2.5: Close-up of the Soft-Touch control panel with digital display and various function icons.
Figure 2.6: Rear view showing the access panel for the dust filter and the removable water tank.
Figure 2.7: The compact remote control for convenient operation of the evaporative cooler.
Figure 2.8: Technical drawing indicating the dimensions of the ARGO Polyfemo Slim: 675mm height, 258mm width, 170mm depth.
3. Setup
3.1. Unpacking
- Carefully remove the evaporative cooler from its packaging.
- Check for any signs of damage during transit. If damaged, do not operate and contact customer support.
- Remove all packing materials, including any protective films or tapes.
- Ensure all included components are present: the product unit, user manual, warranty card, and synthetic ice board (ice pack).
3.2. Placement
- Place the evaporative cooler on a firm, level surface.
- Ensure there is adequate space around the unit for proper airflow (at least 20 cm from walls or furniture).
- Do not place the unit near heat sources or in direct sunlight.
3.3. Filling the Water Tank
- Pull out the water tank from the rear of the unit using its patented opening system.
- Fill the tank with clean tap water. Do not exceed the maximum fill line indicated on the tank. The tank capacity is 4 liters.
- For enhanced cooling, place the provided synthetic ice board (ice pack) in the freezer until frozen, then add it to the water tank.
- Carefully slide the water tank back into the unit until it clicks into place.
4. Operating Instructions
The ARGO Polyfemo Slim can be operated using the Soft-Touch control panel on top of the unit or the included remote control.
4.1. Control Panel Functions
- Power Button: Turns the unit On/Off.
- Mode Button: Cycles through operating modes: Normal, Natural, and Sleep.
- Speed Button: Adjusts fan speed: Low, Medium, High.
- Timer Button: Sets the operating timer (e.g., 1-8 hours).
- Cooling/Humidification Button: Activates or deactivates the evaporative cooling function.
- Swing Button: Activates or deactivates the oscillation function for wider air distribution.
4.2. Remote Control
The remote control duplicates all functions available on the main control panel, allowing for convenient operation from a distance. Ensure the remote control has working batteries and is pointed towards the unit's receiver.
4.3. Operating Modes
- Normal Mode: Provides a constant airflow at the selected speed.
- Natural Mode: Simulates natural breeze by varying fan speed intermittently.
- Sleep Mode: Gradually reduces fan speed and dims display lights for quiet operation during sleep.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your evaporative cooler.
5.1. Cleaning the Dust Filter
- Unplug the appliance from the power outlet.
- Open the rear panel to access the dust filter.
- Remove the dust filter.
- Clean the filter with a soft brush or vacuum cleaner to remove accumulated dust. For thorough cleaning, rinse with water and mild detergent, then allow to air dry completely before reinserting.
- Reinstall the dust filter and close the rear panel.
5.2. Cleaning the Honeycomb Design
The honeycomb design (evaporative pad) should be cleaned periodically to prevent mineral buildup and maintain cooling efficiency.
- Unplug the appliance.
- Remove the water tank and dust filter as described above.
- Carefully remove the honeycomb pad.
- Rinse the honeycomb pad under running water to remove dust and mineral deposits. For stubborn buildup, soak in a solution of water and white vinegar (1:1 ratio) for 30 minutes, then rinse thoroughly.
- Allow the honeycomb pad to dry completely before reassembling.
5.3. Cleaning the Water Tank
To prevent mold and mildew growth, clean the water tank regularly.
- Unplug the appliance and remove the water tank.
- Empty any remaining water.
- Clean the inside of the tank with a soft cloth and mild detergent. You can also use a solution of water and white vinegar to remove mineral deposits.
- Rinse the tank thoroughly with clean water and allow it to air dry before refilling and reinserting.
6. Troubleshooting
If you encounter issues with your ARGO Polyfemo Slim, please refer to the following common problems and solutions before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply. | Check if the power cord is securely plugged into a working outlet. |
| No cooling effect. | Water tank is empty or cooling function is off. | Fill the water tank. Ensure the cooling/humidification function is activated. |
| Weak airflow. | Dust filter or honeycomb pad is dirty. | Clean the dust filter and honeycomb pad as per maintenance instructions. |
| Unusual noise. | Unit not on a level surface; foreign object in fan; water pump issue. | Ensure the unit is on a flat surface. Unplug and check for obstructions. If noise persists, contact support. |
| Remote control not working. | Batteries are dead or incorrectly inserted. | Replace batteries, ensuring correct polarity. Point remote directly at the unit. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | ARGO |
| Model Name | POLIFEMO SLIM |
| Model Number | ARGO POLIFEMO SLIM |
| Color | White |
| Product Dimensions (L x W x H) | 17 x 25 x 67 cm |
| Item Weight | 4.44 Kilograms |
| Voltage | 230 Volts |
| Mounting Type | Floor Mount |
| Special Feature | Portable |
| Airflow Capacity | 750 CMPH (Cubic Meters Per Hour) |
| Control Type | Touch Control |
| Tank Capacity | 4 Liters |
| Included Components | Product unit, User Manual, Warranty, Synthetic Ice Board |
8. Warranty and Support
Your ARGO Polyfemo Slim Evaporative Cooler comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms and conditions, including the warranty period and coverage details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ARGO customer support. Contact information can typically be found on the manufacturer's website or on the warranty card.
