Arcchio 9968029

Download PDF
Contents

Arcchio LED Tamilo Floor Lamp Instruction Manual

Model: 9968029

1. Introduction

Thank you for choosing the Arcchio LED Tamilo Floor Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.

The Arcchio LED Tamilo is a modern floor lamp designed for optimal lighting in study and office environments. It features integrated LED light sources that emit light evenly upwards and downwards, with a Unified Glare Rating (UGR) of less than 19, making it suitable for computer workstations.

2. Safety Instructions

  • Electrical Safety: This product operates on 230 Volts. Ensure the power supply is disconnected before installation, cleaning, or maintenance. Only connect to a properly grounded outlet.
  • Indoor Use Only: This lamp is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not use in damp or wet locations.
  • Handling: Handle the lamp with care. Do not drop or subject it to strong impacts.
  • Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • No User Serviceable Parts: The LED light sources are integrated and not replaceable by the user. Do not attempt to open or modify the lamp.
  • Ventilation: Ensure adequate air circulation around the lamp. Do not cover the lamp with any materials.

3. Package Contents

Please check that all components are present and undamaged:

  • Arcchio LED Tamilo Floor Lamp Unit
  • Power Cable with Plug

4. Setup and Installation

4.1 Unpacking

Carefully remove all packaging materials. Inspect the lamp for any signs of damage. If any damage is found, do not proceed with installation and contact your retailer.

4.2 Assembly

The Arcchio LED Tamilo floor lamp typically comes pre-assembled or requires minimal assembly, primarily attaching the base to the main stand. Follow any specific instructions provided in the packaging for base attachment.

Close-up view of the stable rectangular base of the Arcchio LED Tamilo floor lamp.

Image: The sturdy rectangular base of the Arcchio LED Tamilo floor lamp, designed for stability.

Full view of the Arcchio LED Tamilo floor lamp, showing its minimalist design.

Image: A complete view of the Arcchio LED Tamilo floor lamp, highlighting its sleek, modern design.

4.3 Placement

Place the floor lamp on a flat, stable surface in your desired location. Ensure the power cable can reach a wall outlet without being stretched or creating a tripping hazard. For optimal lighting in an office or study, position the lamp to illuminate your workspace effectively, minimizing shadows and glare.

Arcchio LED Tamilo floor lamp positioned in an office setting next to a desk and chair.

Image: The Arcchio LED Tamilo floor lamp integrated into an office environment, providing illumination to a desk area.

5. Operating Instructions

5.1 Power Connection

Once the lamp is assembled and placed, plug the power cable into a standard 230V wall outlet.

5.2 Using the Switch

The Arcchio LED Tamilo lamp is equipped with an integrated switch for easy operation. Locate the switch on the lamp's vertical stand. Press the switch to turn the lamp ON or OFF.

Close-up view of the power switch located on the lamp's vertical stand.

Image: A detailed view of the simple ON/OFF switch integrated into the lamp's design for convenient control.

6. Maintenance

  • Cleaning: Ensure the lamp is unplugged before cleaning. Use a soft, dry, lint-free cloth to wipe the surfaces. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or electrical components.
  • Inspection: Periodically check the power cord and plug for any signs of damage. If any damage is observed, discontinue use and contact a qualified electrician or the manufacturer.
  • LED Lifespan: The integrated LED light sources are designed for a long operational life and do not require replacement.

7. Troubleshooting

  • Lamp Does Not Turn On:
    • Ensure the power cable is securely plugged into both the lamp and the wall outlet.
    • Check if the wall outlet is functional by plugging in another device.
    • Verify that the lamp's switch is in the 'ON' position.
  • Light is Dim or Flickering:
    • This lamp is not designed for dimming unless explicitly stated. Ensure it is connected to a standard, non-dimmable circuit.
    • If the issue persists, disconnect power and contact customer support.

For issues not listed here, please contact Arcchio customer support.

8. Specifications

FeatureSpecification
BrandArcchio
ModelTamilo (9968029)
MaterialAluminium / Zinc
ColorWhite (RAL 9003), Black (RAL 7021) base
Length98.4 cm
Width6.5 cm
Height193.4 cm
Weight6.95 kg
Light SourceIntegrated LED (2 x 22W)
Total Wattage44 Watts
Voltage230 Volts
IP RatingIP20
Protection ClassI
UGR<19

8.1 Energy Efficiency

EU Energy Label for the Prios L9001463 lamp, showing energy efficiency class D and 23 kWh/1000h consumption.

Image: EU Energy Label indicating energy efficiency class D. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/744584.

8.2 Spectral Distribution

Graph illustrating the spectral power distribution of the LED light source, showing light intensity across different wavelengths.

Image: Spectral power distribution graph, showing the light output across the visible spectrum.

9. Compliance and Disposal

This product complies with relevant European and UK directives and regulations. The symbols below indicate compliance and proper disposal procedures:

Compliance markings for the Arcchio Tamilo lamp, including IP20, UKCA, CE, WEEE (crossed-out wheelie bin), and electrical hazard symbols.

Image: Compliance symbols including IP20 rating, UKCA, CE, and the WEEE directive symbol.

  • CE Mark: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
  • UKCA Mark: Indicates conformity with applicable requirements for products sold within Great Britain (England, Scotland, and Wales).
  • IP20: Ingress Protection rating, indicating protection against solid objects larger than 12.5mm.
  • WEEE Symbol (Crossed-out Wheeled Bin): This symbol indicates that the product should not be disposed of with general household waste. It must be taken to a designated collection point for recycling electrical and electronic equipment.
  • Electrical Hazard Symbol: Warns of potential electrical hazards.

10. Warranty and Support

Arcchio products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

© Arcchio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.