Introduction
The Smith & Wesson Calibrator Watch (Model SWW877BL-BRK) is a precision quartz timepiece designed for an active lifestyle. It features a durable construction with a stainless steel case back, a scratch-resistant hardened mineral glass crystal, and a comfortable black rubber strap with blue stitching. This watch is built to offer reliability and a bold, sophisticated look, suitable for various outdoor activities.
Figure 1: Angled view of the Smith & Wesson Calibrator Watch, showcasing its black dial with blue hour markers and hands, and black rubber strap.
Product Features
- Precision Quartz Movement: Ensures accurate timekeeping.
- Durable Construction: Stainless steel case back for enhanced longevity.
- Scratch-Resistant Crystal: Hardened mineral glass protects the watch dial.
- Water Resistance: Rated up to 50 meters (164 feet), suitable for showers, swimming, fishing, and water sports. Note: Not suitable for diving.
- Comfortable Strap: Black rubber strap with blue stitching for a secure and stylish fit.
- Day Display: Integrated day of the week sub-dial.
Figure 2: Diagram highlighting key features such as water resistance, scratch-resistant crystal, durable rubber wristband, Japanese movement, day display, and 51mm size.
Setup and Initial Use
Setting the Time and Day
- Pull out the Crown: Gently pull the crown (the knob on the side of the watch) to the first click position to set the day, or to the second click position to set the time.
- Set the Time: Rotate the crown to move the hour and minute hands clockwise until the desired time is displayed. Ensure to account for AM/PM if setting the day as well.
- Set the Day: The watch features a day display. Rotate the crown to adjust the day of the week.
- Push in the Crown: Once the time and day are set, push the crown back into its normal operating position. The watch will begin to run.
Figure 3: Front view of the watch, showing the crown on the right side, used for setting time and day.
Operating the Watch
The Smith & Wesson Calibrator Watch operates as a standard analog quartz watch. Its primary function is accurate timekeeping. The sub-dials provide additional information, including the day of the week.
Water Resistance Guidelines
This watch is water resistant up to 50 meters (5 ATM). This rating means it is suitable for everyday use and can withstand splashes, rain, showering, swimming, and fishing. However, it is not designed for high-impact water sports or diving. Avoid operating the crown or pushers when the watch is wet or submerged to prevent water ingress.
Figure 4: The watch submerged in water, demonstrating its 5 ATM water resistance capability.
Maintenance
- Cleaning: Wipe the watch case and strap regularly with a soft, damp cloth. For the rubber strap, mild soap and water can be used, then rinse thoroughly and dry. Avoid harsh chemicals or abrasive materials.
- Battery Replacement: The watch uses 1 CR2 battery. When the watch stops running, it indicates the battery needs replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
- Storage: When not in use for extended periods, store the watch in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance Check: If the watch is frequently exposed to water, it is advisable to have its water resistance seals checked periodically by a professional.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running | Dead battery | Replace battery (professional service recommended). |
| Time is incorrect | Crown pulled out; Time not set correctly | Push crown in fully; Re-set time as per "Setup" section. |
| Condensation under crystal | Water ingress; Extreme temperature change | Immediately take to a professional watch repair service. Do not attempt to dry it yourself. |
| Strap discomfort | Strap too tight/loose; Skin irritation | Adjust strap for comfortable fit; Clean strap thoroughly; Consult a doctor if irritation persists. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SWW877BL-BRK |
| Movement | Precision Quartz (Japanese Movement) |
| Case Material | Stainless Steel Caseback |
| Crystal Type | Hardened Mineral Glass |
| Strap Material | Black Rubber with Blue Stitching |
| Clasp Type | Deployment Clasp |
| Water Resistance | 50 meters (164 feet) / 5 ATM |
| Face Diameter | 51mm |
| Thickness | 15mm |
| Item Weight | 7.05 ounces (approx. 200g) |
| Battery Type | 1 CR2 battery (included) |
| Manufacturer | Dreme Corp |
Figure 5: The 51mm face diameter of the watch, providing a substantial presence on the wrist.
Warranty and Support
The Smith & Wesson Calibrator Watch comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.
For warranty claims or technical support, please contact the manufacturer, Dreme Corp, or the authorized retailer where the watch was purchased. Keep your proof of purchase for warranty validation.
For more information about Smith & Wesson watches, you may visit the official brand store: Smith & Wesson Store.
