Polibi King Size House Platform Bed with Trundle Instruction Manual

1. Introduction

Thank you for choosing the Polibi King Size House Platform Bed with Trundle. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This versatile bed features a unique house-shaped frame and includes a pull-out trundle, offering flexible sleeping arrangements. It can also be configured as a King size bed or divided into two separate Twin XL beds.

2. Safety Information

• Adult Assembly Required: This product must be assembled by adults.
• Keep Children Away: Keep small children and pets away during assembly to prevent injury or choking hazards from small parts.
• Use on Flat Surface: Assemble the bed on a soft, clean, and level surface to prevent scratches or damage.
• Check All Connections: Ensure all bolts, screws, and connectors are securely tightened before use. Periodically check and re-tighten as needed.
• Weight Capacity: Do not exceed the recommended weight capacity for the main bed and trundle. (Specific weight capacity not provided, refer to product listing if available).
• No Jumping: Do not allow jumping on the bed.
• Ventilation: Ensure adequate ventilation during and after assembly, especially if any new furniture odors are present.

3. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Bed Frame Components (Headboard, Footboard, Side Rails, Roof Frame)
• Trundle Bed Frame Components
• Wooden Slats for Main Bed and Trundle
• Hardware Pack (Bolts, Screws, Washers, Allen Wrench)
• Instruction Manual

4. Setup and Assembly Instructions

Assembly typically requires two adults. An Allen wrench is usually included. A Phillips head screwdriver may also be needed (not included).

Step 1: Unpack and Identify Parts

Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list (if provided in your physical manual) to identify each piece.

Image 1: Fully assembled Polibi King Size House Platform Bed with Trundle in extended configuration.

Step 2: Assemble the Main Bed Frame

Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are finger-tightened initially.

Image 2: Front view of the main bed frame with wooden slats in place.

Step 3: Install Wooden Slats

Place the wooden slats across the bed frame. Secure them using the designated screws or connectors. Ensure even spacing for proper mattress support.

Image 3: Detailed view of the wooden slats and their attachment points on the bed frame.

Step 4: Assemble the House Roof Frame

Attach the roof frame components to the top of the main bed frame posts. Secure with the appropriate hardware.

Image 4: Angled view of the bed frame, showcasing the house-shaped roof structure and installed slats.

Step 5: Assemble the Trundle Bed

Assemble the trundle frame, including its side rails and slats. Attach the wheels to the bottom of the trundle frame. The trundle is designed to slide smoothly under the main bed.

Image 5: Angled view of the bed frame with the trundle unit partially extended from underneath.

Step 6: Final Tightening

Once all components are assembled, go back and securely tighten all bolts and screws using the provided Allen wrench. Do not overtighten.

5. Operating Instructions

Using the Trundle Bed

The trundle bed is designed for easy access. To use, gently pull the trundle frame out from under the main bed. To store, push it back into place until it is fully recessed under the main bed.

Image 6: Polibi King Size House Platform Bed with the trundle bed fully retracted.

Converting to Two Twin XL Beds (if applicable)

This bed can be separated into two individual Twin XL beds. This process typically involves disassembling the central connecting elements and potentially the roof structure, then reconfiguring the side rails to form two distinct frames. Refer to your specific assembly diagram for detailed steps on this conversion.

6. Maintenance

• Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Regular Checks: Periodically inspect all hardware connections (bolts, screws) and re-tighten them as necessary to ensure stability and safety.
• Avoid Excessive Moisture: Protect the wood from prolonged exposure to moisture.
• Sunlight Exposure: Avoid placing the bed in direct sunlight for extended periods, as this may cause fading or warping.

7. Troubleshooting

• Squeaking Noises: If the bed squeaks, check all bolts and screws and tighten them. Ensure the slats are properly seated and not rubbing against the frame.
• Trundle Not Sliding Smoothly: Check the trundle wheels for any obstructions or debris. Ensure the floor surface is clean and level.
• Wobbly Frame: A wobbly frame usually indicates loose connections. Re-tighten all hardware. Ensure the bed is on a flat, even surface.
• Missing Parts: If any parts are missing upon arrival, do not proceed with assembly. Contact customer support immediately for replacement parts.

8. Specifications

Image 7: Dimensional diagram of the Polibi House Platform Bed.

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.