NOTABRICK Vi Portable Bluetooth Speaker Instruction Manual

1. Introduction

Thank you for choosing the NOTABRICK Vi Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

2. Safety Information

• Do not expose the speaker to extreme temperatures or direct sunlight for extended periods.
• Avoid dropping or subjecting the speaker to strong impacts.
• Keep the speaker away from medical devices, as it contains magnets.
• Use only the provided charging cable or a certified equivalent.
• Do not attempt to disassemble, repair, or modify the speaker yourself. Contact customer support if service is required.
• Ensure the charging port cover is securely closed when using the speaker near water to maintain its IPX7 waterproof rating.

3. Package Contents

Verify that all items are present in your package:

• NOTABRICK Vi Portable Bluetooth Speaker
• USB-C Charging Cable
• User Manual

4. Product Overview

Familiarize yourself with the components and controls of your NOTABRICK Vi speaker.

Image: The NOTABRICK Vi Portable Bluetooth Speaker, showcasing its red exterior and illuminated speaker grilles, with water splashing around it, highlighting its waterproof design.

Controls and Ports (Typical Layout)

• Power Button: Press and hold to power on/off.
• Play/Pause Button: Controls music playback and answers/ends calls.
• Volume Up (+): Increases volume. Press and hold for next track.
• Volume Down (-): Decreases volume. Press and hold for previous track.
• Mode/Light Button: Switches between input modes (Bluetooth/AUX) and cycles through light effects.
• USB-C Charging Port: For charging the speaker.
• AUX-in Port: For wired audio connection.

5. Setup

5.1 Charging the Speaker

1. Open the protective cover of the charging port.
2. Connect the USB-C charging cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate. A full charge takes approximately 4 hours.
4. Once fully charged, disconnect the cable and securely close the protective cover.

5.2 Powering On/Off

• To Power On: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the indicator lights turn on.
• To Power Off: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the indicator lights turn off.

5.3 Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicator light will flash).
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "NOTABRICK Vi" from the list of devices.
4. Once paired, the speaker will emit an audible confirmation, and the indicator light will remain solid.
5. The speaker has a wireless range of up to 100 feet (30.48 meters) in open areas.

5.4 Wireless Pairing (TWS - True Wireless Stereo)

To achieve 360° immersive surround sound, you can pair two NOTABRICK Vi speakers together.

Image: Two NOTABRICK Vi speakers positioned to create a 360-degree immersive surround sound experience, as depicted in a home theater setting.

1. Ensure both NOTABRICK Vi speakers are powered on and not connected to any other Bluetooth device.
2. On one of the speakers, double-press the Play/Pause button (or a dedicated TWS button if available, refer to specific button layout). The speaker will enter TWS pairing mode.
3. The two speakers will automatically connect to each other. You will hear an audible confirmation once TWS pairing is successful.
4. Now, connect your device to one of the paired speakers via Bluetooth as described in section 5.3. Audio will play through both speakers in stereo.

5.5 AUX Mode

For wired audio playback:

1. Connect a 3.5mm audio cable (not included) from your audio source to the AUX-in port on the speaker.
2. The speaker will automatically switch to AUX mode, or you may need to press the Mode button to select AUX input.

6. Operating Instructions

6.1 Music Playback

• Play/Pause: Press the Play/Pause button once.
• Next Track: Press and hold the Volume Up (+) button.
• Previous Track: Press and hold the Volume Down (-) button.
• Volume Control: Short press the Volume Up (+) or Volume Down (-) buttons to adjust volume incrementally.

6.2 Call Functions

With the built-in microphone, you can manage calls directly from the speaker when connected via Bluetooth.

• Answer Call: Press the Play/Pause button once.
• End Call: Press the Play/Pause button once during a call.
• Reject Call: Press and hold the Play/Pause button for 2 seconds.
• Activate Voice Assistant (Siri/Google Assistant): Double-press the Play/Pause button.

6.3 RGB Light Modes

The speaker features an RGB lighting system with multiple modes.

• Press the Mode/Light button to cycle through the 7 light colors and 6 light modes.
• The lights can sync with the music beat, creating a dynamic visual effect.
• To turn off the lights, continue pressing the Mode/Light button until the lights are off.

7. Maintenance

7.1 Cleaning

• Wipe the speaker with a soft, damp cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Ensure the charging port cover is closed before cleaning with a damp cloth.

7.2 Waterproofing (IPX7)

The NOTABRICK Vi speaker is IPX7 waterproof, meaning it can be submerged in water up to 1 meter (3 feet) for 30 minutes. This makes it suitable for use in showers, by the pool, or at the beach.

Image: The NOTABRICK Vi speaker partially submerged in clear water, illustrating its IPX7 waterproof capability, suitable for various wet environments.

• Always ensure the charging port cover is completely sealed before exposing the speaker to water.
• After exposure to water, wipe the speaker dry with a soft cloth.
• Do not charge the speaker if the charging port or cable is wet.

7.3 Storage

• Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, charge the battery to approximately 50% every few months to maintain battery health.

8. Troubleshooting

9. Specifications

10. Warranty and Support

10.1 Warranty Information

Your NOTABRICK Vi Portable Bluetooth Speaker comes with a 180-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures your product functions as intended under normal use.

10.2 Customer Support

If you encounter any issues or have questions regarding your NOTABRICK Vi speaker, please do not hesitate to contact our customer support team. We are committed to providing satisfactory assistance.

• Email: support@notabrick.com (Example)
• Website: www.notabrick.com (Example)

Please have your purchase details and model number (Vi) ready when contacting support.