Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assemble the chairs on a soft, clean surface to prevent scratching.
- Do not overtighten screws during assembly, as this may damage the wood.
- Regularly check all fasteners to ensure they remain tight. Retighten as necessary.
- Do not stand on the chairs. Use only for seating.
- Maximum weight capacity: 286 lbs (130 kg) per chair. Do not exceed this limit.
- Keep children away from the assembly area and small parts.
Package Contents
Verify that all components are included in your package:
- 2 x Marquis Performance Velvet Dining Chair Seats
- 8 x Chair Legs (4 per chair)
- 1 x Hardware Pack (screws, washers, Allen wrench)
Image: Two fully assembled Modway Marquis dining chairs, showcasing their design and white velvet upholstery.
Assembly Instructions
Follow these steps to assemble your Modway Marquis Dining Chairs:
- Unpack Components: Carefully remove all parts from the packaging. Place the chair seat upside down on a soft, clean surface to protect the upholstery.
- Locate Legs: The chair legs are typically stored within a zippered compartment or flap underneath the chair seat for shipping. Open this compartment and retrieve the eight legs.
- Attach Legs: Identify the four attachment points on the underside of each chair seat. Align each leg with its corresponding attachment point. Ensure the non-marking foot caps are facing downwards.
- Secure Legs: Using the provided screws and Allen wrench from the hardware pack, securely fasten each leg to the chair seat. Tighten until firm, but do not overtighten.
- Repeat for Second Chair: Follow steps 1-4 for the second dining chair.
- Final Check: Once both chairs are assembled, gently place them upright. Ensure all legs are stable and the chairs do not wobble. If wobbling occurs, check that all screws are evenly tightened.
Image: Detailed view of chair features, including the black rubberwood legs that require attachment during assembly.
Care and Maintenance
Proper care will extend the life and appearance of your dining chairs:
- Cleaning Velvet Upholstery: For spills, blot immediately with a clean, dry cloth. Do not rub. For general cleaning, vacuum regularly with an upholstery attachment to remove dust and debris. For tougher stains, consult a professional upholstery cleaner or use a mild, water-free solvent. Always test cleaning solutions on an inconspicuous area first.
- Wood Legs: Wipe wood legs with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the upholstery.
- Heat Sources: Keep chairs away from direct heat sources like radiators or fireplaces.
- Moving Chairs: Always lift chairs when moving them to prevent damage to the legs and flooring. Do not drag.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Legs are not evenly tightened or installed correctly. | Place the chair on a flat surface. Loosen all leg screws slightly, then press down on the chair seat to ensure all legs are touching the floor. Retighten screws evenly. Ensure legs are fully inserted into their mounts. |
| Screws become loose over time. | Normal wear and tear. | Periodically check and retighten all screws and fasteners to maintain stability. |
| Upholstery appears flattened or creased. | Prolonged pressure or shipping compression. | Gently brush the velvet in the direction of the pile. Allow the chair to air out; minor creases often relax over time. |
Specifications
- Brand: Modway
- Model Name: Marquis Performance Velvet Dining Chairs - Set of 2
- Model Number: EEI-5010-WHI
- Color: White
- Material: Performance Velvet (Textile), Wood (Frame/Legs), Foam (Fill/Seat)
- Product Dimensions (per chair): 25"D x 22"W x 36"H
- Item Weight (per chair): Approximately 20 Pounds
- Maximum Weight Recommendation: 286 lbs (130 kg)
- Assembly Required: Yes
- Included Components: 2 Chairs
Image: Dimensional diagram of the dining chair, illustrating its height, width, and depth.
Product Overview Video
Video: An overview of the Modway Marquis Performance Velvet Dining Chairs, highlighting key features and design elements. This video is provided by Modway Inc.
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please visit the official Modway website or contact their customer service department.
You can find more information and contact details on the Modway Store on Amazon.