Introduction
Welcome to the user manual for your new beatXP Gravity digital weighing machine. This device is designed to provide accurate body weight measurements with ease of use and durability. Please read this manual carefully to ensure proper operation and maintenance of your weighing scale.
The beatXP Gravity Weighing Machine, featuring a sleek black design, a backlit LCD display showing weight and room temperature, and a prominent 24-month warranty seal.
Key Features
- Accurate Readings: Equipped with high-precision sensors, measuring weights from 2.5 to 180 kg with 0.5 kg accuracy. Provides readings in kilograms (kg) and pounds (lbs).
- Easy to Use: Features 'Step ON' technology for automatic calibration and precise measurements upon stepping on the scale.
- Multi-Function Indicators: Backlit LCD panel displays weight, room temperature, low battery, and overload alerts.
- Durable Design: Constructed with 6mm thick tempered glass, offering scratch-resistant and anti-skid properties. Smooth corners and curved edges enhance safety.
- Power Source: Operates on 2 AAA batteries.
A person's foot placed on the beatXP Gravity Weighing Machine, illustrating the 'Step ON' technology and the four sensor points for accurate and precise body weight measurements.
A detailed view of the beatXP Gravity Weighing Machine's backlit LCD display, showing clear, large white numbers for weight readings (e.g., 43.85 kg) and a smaller display for room temperature.
An illustrative diagram highlighting the robust construction of the beatXP Gravity Weighing Machine, including its protected bottom panel, 35mm anti-skid padding, 5mm thick tempered glass, and round corner design for safety and stability.
An exploded diagram of the beatXP Gravity Weighing Machine, revealing its smartly engineered internal structure with sturdy components and high-precision sensor systems designed for accurate weight measurement.
Setup Guide
- Unpack the Scale: Carefully remove the weighing machine from its packaging.
- Install Batteries: Open the battery compartment on the underside of the scale. Insert 2 AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
- Placement: Place the scale on a hard, flat, and stable surface. Avoid carpets, rugs, or uneven flooring, as this can affect accuracy.
- Initial Calibration: For the first use or after moving the scale, step on it briefly to turn it on, then step off. The display will show '0.0' or a similar reading, indicating it's ready for use.
Operating Instructions
- Step On: Gently step onto the center of the scale with bare feet. The scale will automatically turn on and begin measuring your weight.
- Wait for Reading: Stand still on the scale. The display will flash and then show your stable weight reading.
- Ignore First Reading: It is recommended to ignore the very first reading after the scale has been moved or if it has been off for a long time. Step off and then step on again for the most accurate measurement.
- Display Information: The backlit LCD will show your weight, and may also display the room temperature.
- Auto Shut-Off: The scale will automatically turn off after a few seconds of inactivity to conserve battery life.
Maintenance and Care
- Cleaning: Wipe the scale surface with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as they may damage the glass or electronic components.
- Storage: Store the scale in a dry place at room temperature. Avoid extreme temperatures or high humidity.
- Battery Replacement: When the low battery indicator appears on the display, replace both AAA batteries with new ones.
- Avoid Impact: While the tempered glass is durable, avoid dropping the scale or placing heavy objects on it, which could cause damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inaccurate Readings | Scale on uneven surface; First reading after moving; Scale not calibrated. | Place scale on a hard, flat surface. Step off and then back on the scale to re-calibrate and take a new reading. |
| Display shows 'Lo' or 'Err' | Low battery. | Replace the 2 AAA batteries. |
| Display shows 'OL' or 'E-0' | Overload (weight exceeds maximum capacity). | The maximum weight capacity is 180 kg. Step off the scale to prevent damage. |
| No Display | Batteries incorrectly installed or dead. | Check battery polarity or replace batteries. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 11.02 x 11.02 x 1.18 inches |
| Weight | 2.2 Pounds |
| Item Model Number | Gravity |
| Manufacturer | beatXP |
| Display Type | LCD (Backlit) |
| Weight Limit | 180 Kilograms (396 lbs) |
| Material | 6mm Thick Tempered Glass |
| Power Source | 2 x AAA Batteries |
Warranty Information
The beatXP Gravity Weighing Machine comes with a 2-year replacement warranty on manufacturing defects only. Please retain your purchase receipt as proof of purchase for warranty claims. For any issues covered under warranty, please contact customer support.
Customer Support
If you have any questions, concerns, or require assistance with your beatXP Gravity Weighing Machine, please contact beatXP customer support. Refer to your product packaging or the beatXP official website for the most current contact information.
