NWIASS 1
NWIASS Deer Antler Chandelier 12 Lights User Manual
Model: 1 | Brand: NWIASS
Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your NWIASS Deer Antler Chandelier. Please read this manual thoroughly before installation and retain it for future reference. This chandelier is designed to complement various home styles, offering a rustic aesthetic inspired by natural antlers.
Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Ensure the mounting surface can support the weight of the fixture.
- Do not connect this fixture to an ungrounded electrical system.
- Handle the chandelier components with care to avoid damage.
- Do not exceed the maximum wattage specified for the bulbs.
Package Contents
Verify that all components are present before beginning installation:
- Antler Chandelier Assembly (1 unit)
- Mounting Hardware Kit (includes canopy, chain, and necessary fasteners)
- Instruction Manual
Note: Light bulbs are not included and must be purchased separately.
Setup and Installation
Follow these steps carefully for proper installation of your chandelier.
1. Prepare for Installation
- Turn off power at the main circuit breaker.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Review the parts list and ensure all items are accounted for.
2. Assemble the Chandelier Body
The chandelier body is largely pre-assembled. Ensure all antler arms are securely attached.
Image: Close-up of the chandelier's antler arms, showing the E12 lampholders and the central disc support. This illustrates the detailed construction of the fixture.
3. Install the Mounting Hardware
- Attach the mounting bracket to the junction box in the ceiling.
- Determine the desired hanging height for the chandelier. The adjustable chain is 39.37 inches (3.28 feet) long. Adjust the chain length by removing links as needed.
- Securely attach one end of the chain to the chandelier body and the other end to the canopy.
Image: Detail of the chandelier's chain and canopy, illustrating the connection point to the ceiling for installation.
4. Electrical Connections
- Connect the fixture's wires to the house wires according to standard electrical codes (black to black, white to white, ground to ground).
- Ensure all connections are secure with wire nuts.
5. Secure the Canopy and Install Bulbs
- Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws.
- Install 12 E12 base bulbs (not included) into the lampholders. Do not exceed 40 watts per bulb. Compatible bulb types include LED, energy-saving, and incandescent lamps.
Image: A diagram detailing the chandelier's dimensions (47.2" height, 29" width, 25" body height), E12 bulb base compatibility (max 40W), and visual examples of the chandelier in both off and on states.
Image: A detailed view of an E12 bulb, designed to resemble a candle flame, securely placed within an antler lampholder of the chandelier.
6. Restore Power
- Turn the power back on at the circuit breaker.
- Test the chandelier to ensure it functions correctly.
Operating Instructions
The NWIASS Deer Antler Chandelier is designed for straightforward operation.
- Power On/Off: The chandelier can be controlled via a wall switch (Push Button type) or a remote control, if integrated into your home's lighting system.
- Bulb Compatibility: Use E12 base bulbs. The chandelier supports LED, energy-saving, and incandescent lamps, with a maximum wattage of 40W per bulb.
- Dimmable Feature: If dimmable bulbs are installed and connected to a compatible dimmer switch, the light intensity can be adjusted. The light color is warm light (3000 Kelvin).
Maintenance
Regular maintenance ensures the longevity and appearance of your chandelier.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe down the antler components and bulbs. Avoid abrasive cleaners or solvents, as they may damage the resin finish.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow old bulbs to cool completely before removal. Screw in new E12 base bulbs gently to avoid overtightening.
- Inspection: Periodically check all connections and mounting hardware for tightness. If any damage is observed, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your chandelier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chandelier does not light up. | No power, loose wiring, faulty bulb, or faulty switch. | Check circuit breaker. Ensure all wire connections are secure. Replace bulbs. Check wall switch functionality. |
| Lights flicker. | Loose bulb, incompatible dimmer switch, or loose wiring. | Tighten bulbs. Ensure dimmer switch is compatible with LED/energy-saving bulbs if used. Check wiring connections. |
| Chandelier hangs unevenly. | Improperly installed mounting bracket or chain. | Ensure mounting bracket is level and securely fastened. Verify chain links are properly connected and balanced. |
Specifications
| Feature | Detail |
|---|---|
| Brand | NWIASS |
| Model Name | 1 |
| ASIN | B09TH7J2VV |
| Color | Brown |
| Material | Resin |
| Style | Country Rustic |
| Light Fixture Form | Close to Ceiling |
| Room Type | Dining Room, Hotel, Store, Cafe, Foyer, Kitchen, Living Room, Entryway |
| Indoor/Outdoor Usage | Indoor |
| Power Source | DC |
| Special Feature | Corded |
| Control Method | Remote |
| Light Source Type | Energy Efficient |
| Finish Type | Painted |
| Shade Material | Resin |
| Number of Light Sources | 12 |
| Voltage | 110 Volts (DC) |
| Theme | Classic Home Antler Chandelier Lighting |
| Light Color | Warm light |
| Shape | Round |
| Embellishment | Crystal |
| Lighting Method | Adjustable |
| Number of Items | 1 |
| Bulb Base | E12 |
| Switch Type | Push Button |
| Mounting Type | Monopoint with Canopy |
| Assembly Required | Yes |
| Item Weight | 30.4 pounds |
| Product Dimensions | 31.89 x 31.1 x 31.89 inches |
| Assembled Height | 81 centimeters |
| Assembled Length | 81 centimeters |
| Assembled Width | 79 centimeters |
| Number of Antlers | 15 |
| Maximum Compatible Wattage | 40 Watts (per bulb) |
| Plug Format | A- US style |
| Bulb Features | Dimmable (with compatible bulbs/switch) |
| Color Temperature | 3000 Kelvin |
Customer Support
NWIASS is committed to providing a positive customer experience. If you have any questions, concerns, or require assistance with your Deer Antler Chandelier, please do not hesitate to contact us. We recommend attaching pictures to your inquiry for faster resolution.
Contact Method: Please contact us via Amazon email.
We aim to respond to all inquiries within 24 hours.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.