LITTLE TREE Free Standing Closet Organizer

Introduction

Thank you for choosing the LITTLE TREE Free Standing Closet Organizer, Model 1029. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new garment rack. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Information

• Weight Capacity: Do not exceed the maximum recommended load of 350 lbs (158 kg) for the entire unit, and 50 lbs (22.6 kg) for the garment rods. Overloading can cause instability and damage.
• Assembly: Ensure all parts are correctly assembled and tightened according to the instructions. Loose connections can lead to collapse.
• Stability: Place the organizer on a flat, level surface. Uneven surfaces can compromise stability.
• Anti-Tip Device: It is highly recommended to use the included anti-tip device to secure the organizer to a wall, especially in households with children or pets, to prevent accidental tipping.
• Children: Keep children away from the assembly area. Small parts can be a choking hazard. Do not allow children to climb on or play with the organizer.
• Maintenance: Regularly check all connections and tighten as necessary.

Parts List

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.

Note: The exact number of metal frame components may vary slightly based on the specific design of your Model 1029. Refer to the included diagram for precise identification.

Assembly Instructions

Assembly is required. All necessary tools and instructions are included. It is recommended to assemble the unit with another person for ease and safety.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify all parts against the parts list.
2. Attach Adjustable Leg Pads: Screw the adjustable leg pads into the bottom of the main vertical posts.
3. Assemble Base Frame: Connect the lower horizontal bars to the vertical posts to form the base of the organizer. Ensure all connections are finger-tight only at this stage.
4. Install Shelves: Slide the plastic clips onto the vertical posts at your desired shelf heights. Ensure the arrow on the clips points upwards. Place the particle board shelves onto the clips, gently tapping with a rubber mallet (or a hammer with a cloth) to secure them.
5. Attach Garment Rod: Secure the garment rod between the designated vertical posts using the provided hardware.
6. Final Tightening: Once all components are in place, fully tighten all screws and connections using the Allen wrench. Ensure the unit is stable and level.
7. Install Anti-Tip Device: For added safety, attach the anti-tip device to the top rear of the organizer and secure it to a wall stud using appropriate wall anchors (not always included, but recommended for secure mounting).

Image: Fully assembled LITTLE TREE Free Standing Closet Organizer, Model 1029, showcasing its structure and storage capabilities.

Usage Guidelines

• Clothing Storage: Use the garment rod for hanging shirts, dresses, jackets, and other apparel. The shelves are ideal for folded items, accessories, shoes, and storage bins.
• Weight Distribution: Distribute weight evenly across shelves and hanging rods to maintain stability. Avoid concentrating heavy items on one side.
• Versatile Placement: This freestanding organizer is suitable for various spaces including bedrooms, laundry rooms, walk-in closets, and entryways.
• Accessory Hooks: Utilize the integrated hooks (if applicable to your model) for hanging bags, hats, belts, or other small items.

Image: The closet organizer fully utilized with hanging clothes, folded items on shelves, and storage boxes, demonstrating its large storage solution.

Maintenance

• Cleaning: Wipe the surfaces with a dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if any looseness is detected.
• Avoid Moisture: Keep the organizer in a dry environment. Prolonged exposure to moisture can cause damage to the particle board.

Troubleshooting

• Unit is Wobbly:
  • Ensure all screws are fully tightened.
  • Check that the unit is placed on a level surface. Adjust the leg pads as needed to stabilize.
  • Verify that the anti-tip device is securely installed if applicable.
• Shelves are Uneven:
  • Recheck the placement of the plastic clips on the vertical posts. Ensure they are at the same height on all corresponding posts.
  • Make sure shelves are fully seated onto the clips.
• Missing Parts:
  • Carefully re-check all packaging materials. Small parts can sometimes be overlooked.
  • Contact customer service for replacement parts.

Specifications

Image: Technical drawing illustrating the precise dimensions of the closet organizer for planning and placement.

Image: Close-up view highlighting the sturdy construction, including solid connections, power-coated finish, premium board, and adjustable leg pads.

Warranty and Support

LITTLE TREE offers an 18-month warranty and friendly customer service. If your item arrives damaged in any way, or if you have any questions or concerns regarding your product, please feel free to contact us for assistance.

For customer support, please refer to the contact information provided on your purchase receipt or the official LITTLE TREE website.