Introduction
The PANACARE Automatic Blood Pressure Monitor is designed for accurate and convenient measurement of blood pressure and heart rate at home. This device utilizes advanced measurement technology to provide reliable clinical readings, making it an essential tool for daily health monitoring. It features a large tri-color backlit LCD display, voice reading function, and memory for two users, ensuring ease of use for individuals and families.
Image: The PANACARE Blood Pressure Monitor, recommended by doctors and pharmacists, shown with a healthcare professional and a patient.
Image: Overview of the PANACARE Fully Automatic Upper Arm Blood Pressure Monitor's key features, including extra-long cuff, voice broadcast, 2x98 memory sets, irregular heartbeat checking, accuracy, 198 total records, one-touch operation, tri-color backlight, 3.4" large display, and date/time display.
Setup
1. Unpacking the Device
Carefully remove all components from the packaging. The kit includes:
- PANACARE Blood Pressure Monitor (Model BSX516)
- Extended Blood Pressure Cuff
- Storage Bag
- USB Charging Cable
Image: The complete package contents, including the PANACARE Blood Pressure Monitor, extended cuff, storage bag, and USB charging cable.
2. Powering the Device
The blood pressure monitor can be powered by two methods:
- 4 AA Batteries: Insert four AA batteries (not included) into the battery compartment located on the bottom of the device. Ensure correct polarity.
- USB Charging Cable: Connect the provided USB charging cable to the monitor and a compatible USB power source (e.g., adapter, laptop, power bank).
For continuous use, USB power is recommended. If using batteries, ensure they are fresh for accurate readings.
Image: Illustration of the two power options for the PANACARE Blood Pressure Monitor: 4 AA batteries (not included) and the included USB charging cable.
3. Applying the Cuff
Proper cuff application is crucial for accurate measurements. The adjustable cuff is designed for arm circumferences between 8.7 and 16.5 inches.
- Open the Cuff: Open the cuff and pass one end through the iron ring. Ensure the Velcro faces outward.
- Position the Cuff: Wrap the cuff around your bare left upper arm. The air tube should run down the center of your arm, aligned with your middle finger. The bottom edge of the cuff should be approximately 2-3 cm (about 1 inch) above your elbow joint.
- Secure the Cuff: Tighten the cuff snugly but not too tightly. You should be able to insert one or two fingers between the cuff and your arm.
- Arm Position: Rest your arm comfortably on a table or flat surface with your palm facing upwards. Ensure the cuff is at the same level as your heart.
Image: A visual guide demonstrating the four steps for correctly applying the blood pressure cuff to the upper arm for accurate measurement.
Image: A person demonstrating the correct placement of the adjustable extra-long cuff on the upper arm, highlighting its size range of 8.7-16.5 inches.
Operating Instructions
1. Taking a Measurement
Before measuring, sit quietly for a few minutes. Avoid talking, moving, or eating during the measurement process.
- Select User: If using the 2-user memory mode, press the MEM button to switch between User 1 and User 2.
- Start Measurement: Press the START/STOP button. The cuff will automatically inflate, and the measurement will begin.
- View Results: Once the measurement is complete, the systolic pressure (SYS), diastolic pressure (DIA), and pulse rate (PUL) will be displayed on the large LCD screen. The device will automatically turn off after 30 seconds.
Image: The PANACARE Blood Pressure Monitor displaying a reading of 120/75 mmHg with a pulse of 80 bpm, along with the tri-color backlight indicators.
2. Understanding the Tri-Color Backlight
The monitor features a tri-color backlit display to visually indicate your blood pressure category according to WHO (World Health Organization) guidelines:
- Green: Blood pressure below 140 mmHg (Normal range).
- Yellow: Blood pressure between 140-180 mmHg (Mild to Moderate Hypertension).
- Red: Blood pressure above 180 mmHg (Severe Hypertension).
Image: Visual representation of the tri-color backlight system, showing green for normal, yellow for mild-medium hypertension, and red for severe hypertension.
3. Voice Reading Function
The device includes an audio reading function, which is particularly useful for the elderly or visually impaired users. You can control this feature using the SET button.
- Press the SET button to toggle the voice reading on or off.
- You can also use the SET button to adjust the date and time settings.
Image: The PANACARE Blood Pressure Monitor demonstrating its voice reading function, announcing blood pressure results aloud.
4. 2-User Memory Mode
The monitor supports two users, each with the capacity to store up to 198 readings, including date and time. This allows for easy tracking of health trends for multiple individuals.
- Press the MEM button to review past readings for the current user.
- Press the MEM button again to switch between User 1 and User 2's records.
- An indicator will appear if an irregular heart rate is detected during measurement.
Image: Two PANACARE Blood Pressure Monitors side-by-side, illustrating the 2-user memory mode, allowing separate tracking for two individuals.
5. Setting the Alarm
The device allows you to set an alarm to remind you to measure your blood pressure at a consistent time each day. Refer to the detailed instructions in the included quick start guide for setting the alarm.
Maintenance
1. Cleaning
- Wipe the monitor and cuff with a soft, dry cloth.
- Do not use abrasive cleaners or immerse the device in water.
- Ensure the cuff is clean and dry before storage.
2. Storage
- Store the device in the provided cloth bag when not in use.
- Keep it in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity.
- If not using the device for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Device won't turn on | Batteries are dead or incorrectly inserted; USB cable not connected properly. | Replace batteries with new ones, ensuring correct polarity. Check USB cable connection. |
| Inaccurate readings | Improper cuff placement; movement or talking during measurement; incorrect arm position; recent physical activity. | Ensure cuff is correctly applied and positioned at heart level. Remain still and silent during measurement. Rest for 5 minutes before measuring. |
| Cuff does not inflate or inflates too little/much | Air tube disconnected; cuff not properly secured; cuff size mismatch. | Check that the air tube is securely connected to the monitor. Re-apply the cuff snugly. Ensure cuff size is appropriate for your arm (8.7-16.5 inches). |
| Irregular Heartbeat Indicator appears | Detection of an irregular heartbeat during measurement. | This indicates an irregular heartbeat was detected. If this occurs frequently, consult a healthcare professional. |
Note: This device is for home use and monitoring purposes only. It is not a substitute for professional medical advice or diagnosis. Always consult your doctor for any health concerns.
Specifications
Image: Detailed diagram showing the dimensions of the PANACARE Blood Pressure Monitor and cuff, along with labels for display elements like Systolic, Diastolic, and Pulse.
| Feature | Detail |
|---|---|
| Brand | P PANACARE |
| Model Number | BSX516 |
| Display Type | LCD with Tri-Color Backlight |
| Power Source | 4 AA Batteries (not included) or USB Powered |
| Cuff Size | Adjustable, 8.7-16.5 inches (22-42 cm) |
| Memory Capacity | 2 Users, 198 readings per user (total 396) with date and time |
| Voice Function | Yes (toggle on/off) |
| Irregular Heartbeat Detection | Yes |
| Automatic Shut-off | Yes (after 30 seconds of inactivity) |
| Product Dimensions | 13L x 11W x 5.8Th centimetres (Monitor) |
| Item Weight | 15.52 Ounces (approx. 440g) |
Warranty and Support
The PANACARE Automatic Blood Pressure Monitor comes with a 12-month warranty from the date of purchase.
Our professional customer service team is available 24/7 to assist you with any questions or issues you may encounter. If you have any inquiries about your blood pressure monitor, please contact us directly. We aim to respond within 24 hours to ensure a satisfactory experience.
For support, please refer to the contact information provided in your product packaging or visit the official PANACARE website.
