REVODATA IPIR-P-HS

Download PDF
Contents

REVODATA 5MP POE PIR IP Camera User Manual

Model: IPIR-P-HS

Brand: REVODATA

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your REVODATA 5MP POE PIR IP Camera (Model: IPIR-P-HS). This high-resolution indoor security camera features 5MP (2880x1616P) video, invisible 940nm IR night vision, Power Over Ethernet (POE) support, and H.265 video compression for efficient storage and bandwidth usage. It is designed for reliable indoor surveillance with motion detection capabilities.

Safety Information

  • Ensure the camera is installed in a stable location to prevent falling.
  • Do not expose the camera to extreme temperatures, humidity, or dust.
  • Use only specified power sources (48V 802.3af POE or 12V 2A DC adapter, not included).
  • Avoid direct exposure of the lens to strong light sources.
  • Do not attempt to disassemble or modify the camera. Refer all servicing to qualified personnel.
  • Keep out of reach of children.

Package Contents

Verify that all items are present in the package:

  • Camera x 1
  • Screws set x 1
  • User Manual x 1
Package contents of REVODATA IPIR-P-HS camera including camera, screws, and user manual.

Figure 1: Contents included in the REVODATA IPIR-P-HS camera package.

Product Overview

The REVODATA IPIR-P-HS is a compact indoor security camera designed to blend into its environment, often resembling a motion sensor. Key features include:

  • 5MP High Resolution: Captures clear and detailed images at 2880x1616P.
  • Invisible IR Night Vision: Equipped with 940nm LEDs that do not emit visible red light, providing discreet night surveillance up to 15 meters.
  • Power Over Ethernet (POE): Simplifies installation by allowing power and data transmission over a single Ethernet cable (48V 802.3af POE). An auxiliary 12V 2A DC power connector is also available for non-POE setups.
  • H.265 Compression: Efficient video encoding reduces bandwidth and storage requirements by approximately 50% compared to H.264.
  • Motion Detection: Supports motion detection with P2P cloud function for real-time alerts.
  • Wide Viewing Angle: Features a 3.7mm lens providing an approximate 80-degree viewing angle.
Front view of the REVODATA 5MP POE PIR IP Camera, a white rectangular device resembling a motion sensor.

Figure 2: Front view of the REVODATA IPIR-P-HS camera.

Diagram illustrating the invisible IR night vision of the camera, showing day and night views with an 80-degree field of view.

Figure 3: Invisible IR Night Vision capability.

Image showing a POE cable connection and a diagram explaining the benefits of H.265 compression over H.264.

Figure 4: POE support and H.265 encoding efficiency.

Setup

This camera is designed for wired Ethernet connection and supports Power Over Ethernet (POE). It is not a wireless or Wi-Fi camera.

  1. Power Connection: Connect the camera to a POE-enabled switch or NVR using an Ethernet cable. Alternatively, if not using POE, connect a 12V 2A DC power adapter (not included) to the auxiliary power connector.
  2. Network Connection: Connect the camera's RJ45 port to your network router or NVR.
  3. Initial Access:
    • VMS Software: Install the VMS software on your Windows computer (not compatible with MAC OS or Linux). Use the software to search for the camera on your local network. Default username is 'admin', default password is 'admin'.
    • Web Browser: Obtain the camera's dynamic IP address from the VMS software. Enter this IP address into a web browser. Default username is 'admin', default password is '123456'.
    • Smartphone APP: Download the "Linklemo" app from your mobile app store (iOS/Android). Follow the in-app instructions to add the device. Ensure your phone and the camera are on the same network during initial setup.

Video 1: Guide on connecting the camera to VMS software, web browser, and smartphone application for remote viewing.

Operating the Camera

Once connected, you can monitor and manage your camera through the VMS software, web interface, or the Linklemo mobile application.

VMS Software / Web Interface

  • Live View: Access real-time video streams from your camera.
  • Record Settings: Configure continuous recording or motion-triggered recording schedules.
  • Alarm Info: Review motion detection alerts and other system notifications.
  • Device Configuration: Adjust video settings (resolution, frame rate, encoding), audio settings, OSD (On-Screen Display) settings, and image settings (brightness, contrast, sharpness).
  • Network Settings: Configure IP addresses, ports, and other network parameters.

Linklemo Mobile Application

  • Remote Viewing: View live feed and playback recorded footage from anywhere with an internet connection.
  • Push Notifications: Receive instant alerts on your smartphone when motion is detected.
  • Device Management: Add multiple devices, manage settings, and share access.
Screenshot showing the Linklemo mobile app interface on a smartphone and the VMS software interface on a desktop computer, both displaying the camera feed.

Figure 5: Remote viewing via Linklemo APP and VMS software.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the camera body. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.
  • Firmware Updates: Periodically check the manufacturer's website or the VMS software for available firmware updates to ensure optimal performance and security.
  • Environmental Conditions: Ensure the camera operates within its specified temperature range (up to 60°C) and avoid high humidity.

Troubleshooting

ProblemPossible Cause / Solution
Camera is not powering on.
  • Verify POE connection to a POE-enabled switch/NVR.
  • If using a DC adapter, ensure it is a 12V 2A power supply and properly connected.
  • Check the Ethernet cable for damage.
Cannot connect to the camera via VMS/Web/App.
  • Ensure the camera is properly connected to the network.
  • Verify the IP address is correct and your device is on the same local network.
  • Check default login credentials: VMS (admin/admin), Web (admin/123456).
  • For the Linklemo app, ensure Bluetooth permissions are granted during setup.
Pixelated or poor image quality.
  • Check network bandwidth and stability.
  • Adjust video stream settings (resolution, bitrate) in the camera's configuration.
  • Ensure the lens is clean and free from obstructions.
Human detection shows blue boxes or is overly sensitive.
  • Access the camera's web interface or VMS software.
  • Navigate to Configure > Alarm Manager > Human Detect.
  • Uncheck or close the "Show Human setting" option.
  • Click Save to apply changes.
No night vision or poor night vision.
  • Ensure the ambient light is low enough for the IR LEDs to activate.
  • Check for obstructions in front of the IR LEDs.
  • Verify IR settings in the camera's image configuration.

Specifications

FeatureDetail
Model NameIPIR-P-HS
BrandREVODATA
Indoor/Outdoor UsageIndoor
Video Capture Resolution5 MP (2880x1616P)
Connectivity TechnologyEthernet (POE)
Power SourceCorded Electric (48V POE or 12V 2A DC)
Lens3.7mm
Viewing Angle80 Degrees
Night Vision940nm Invisible IR LEDs
Night Vision Range15 Meters
Video CompressionH.265/H.264
Frame Rate25 fps
Motion DetectionYes (Motion Only Alert Type)
Compatible DevicesSmartphone (iOS, Android), Windows PC
MaterialPlastic
Dimensions (L x W x H)2.76 x 1.85 x 4.72 inches
Item Weight8.8 ounces
Operating TemperatureUp to 60 Degrees Celsius

Warranty and Support

For warranty information and technical support, please refer to the official REVODATA website or contact their customer service. A digital version of this user manual may also be available for download at https://m.media-amazon.com/images/I/C1QiLjYIlXL.pdf.

© 2024 REVODATA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.